Re: ata link not reset properly
From: Robert Hancock
Date: Sat Jun 26 2010 - 00:07:33 EST
On 06/25/2010 12:00 PM, Ortwin Glück wrote:
On 25.06.2010 17:19, Tejun Heo wrote:
Patch attached, but please see below.
Cheers, I will give it a try and provide feedback if "it" happens again.
Is it PATA?
Yes. This chipset doesn't have SATA, only PATA.
Ahh, ok, it's not sata_nv at all then, it's pata_amd. On the same chip,
totally different controller though.
PATA doesn't normally use hard-resets as a means of error recovery -
that would mean hitting the RESET line, which I don't think most
controllers can do on software command (it usually only gets asserted on
power up or hitting the reset button), unlike on SATA where there's a
defined way to trigger a COMRESET which is mostly equivalent. Also, that
resets both devices on the channel, unlike soft reset which is specific
to one device.
Why do you have 2.01?
for the DVD drive?
Can you please attach full boot
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/