Re: [PATCH 1/2] Add a common struct clk

[MyungJoo Ham]

Hello Jeremy,

On Mon, Jun 21, 2010 at 2:35 PM, Jeremy Kerr <jeremy.kerr@xxxxxxxxxxxxx> wrote:
> We currently have 21 definitions of struct clk in the ARM architecture,
> each defined on a per-platform basis. This makes it difficult to define
> platform- (or architecture-) independent clock sources without making
> assumptions about struct clk, and impossible to compile two
> platforms with different struct clks into a single image.
>
> This change is an effort to unify struct clk where possible, by defining
> a common struct clk, containing a set of clock operations. Different
> clock implementations can set their own operations, and have a standard
> interface for generic code. The callback interface is exposed to the
> kernel proper, while the clock implementations only need to be seen by
> the platform internals.
>
> This allows us to share clock code among platforms, and makes it
> possible to dynamically create clock devices in platform-independent
> code.
>
> Platforms can enable the generic struct clock through
> CONFIG_USE_COMMON_STRUCT_CLK. In this case, the clock infrastructure
> consists of a common struct clk:
>
> struct clk {
>    Âconst struct clk_ops  Â*ops;
>    Âunsigned int      Âenable_count;
>    Âstruct mutex      Âmutex;
> };
>
> And a set of clock operations (defined per type of clock):
>
> struct clk_operations {
>    int       (*enable)(struct clk *);
>    void      Â(*disable)(struct clk *);
>    unsigned long  (*get_rate)(struct clk *);
> Â Â Â [...]
> };
>
> To define a hardware-specific clock, machine code can "subclass" the
> struct clock into a new struct (adding any device-specific data), and
> provide a set of operations:
>
> struct clk_foo {
>    Âstruct clk   Âclk;
>    Âvoid __iomem  Â*some_register;
> };
>
> struct clk_operations clk_foo_ops = {
> Â Â Â Â.get_rate = clk_foo_get_rate,
> };
>
> The common clock definitions are based on a development patch from Ben
> Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>.
>
> Signed-off-by: Jeremy Kerr <jeremy.kerr@xxxxxxxxxxxxx>
>
> ---
> Âarch/Kconfig    Â|  Â3 +
> Âinclude/linux/clk.h | Â 77 +++++++++++++++++++++++++++++----
> Âkernel/Makefile   |  Â1
> Âkernel/clk.c    Â| Â101 ++++++++++++++++++++++++++++++++++++++++++++
> Â4 files changed, 173 insertions(+), 9 deletions(-)
>
> diff --git a/arch/Kconfig b/arch/Kconfig
> index acda512..2458b5e 100644
> --- a/arch/Kconfig
> +++ b/arch/Kconfig
> @@ -151,4 +151,7 @@ config HAVE_MIXED_BREAKPOINTS_REGS
> Âconfig HAVE_USER_RETURN_NOTIFIER
> Â Â Â Âbool
>
> +config USE_COMMON_STRUCT_CLK
> + Â Â Â bool
> +
> Âsource "kernel/gcov/Kconfig"
> diff --git a/include/linux/clk.h b/include/linux/clk.h
> index 1d37f42..5c1098b 100644
> --- a/include/linux/clk.h
> +++ b/include/linux/clk.h
> @@ -3,6 +3,7 @@
> Â*
> Â* ÂCopyright (C) 2004 ARM Limited.
> Â* ÂWritten by Deep Blue Solutions Limited.
> + * ÂCopyright (c) 2010 Jeremy Kerr <jeremy.kerr@xxxxxxxxxxxxx>
> Â*
> Â* This program is free software; you can redistribute it and/or modify
> Â* it under the terms of the GNU General Public License version 2 as
> @@ -11,18 +12,82 @@
> Â#ifndef __LINUX_CLK_H
> Â#define __LINUX_CLK_H
>
> +#include <linux/err.h>
> +#include <linux/mutex.h>
> +
> Âstruct device;
>
> -/*
> - * The base API.
> +#ifdef CONFIG_USE_COMMON_STRUCT_CLK
> +
> +/* If we're using the common struct clk, we define the base clk object here */
> +
> +/**
> + * struct clk - hardware independent clock structure
> + * @clk_ops: Â Â Â Â Â implementation-specific ops for this clock
> + * @enable_count: Â Â Âcount of clk_enable() calls active on this clock
> + * @mutex: Â Â Â Â Â Â lock for enable/disable or other HW-specific ops
> + *
> + * The base clock object, used by drivers for hardware-independent manipulation
> + * of clock lines. This will be 'subclassed' by device-specific implementations,
> + * which add device-specific data to struct clk. For example:
> + *
> + * Âstruct clk_foo {
> + * Â Â Âstruct clk;
> + * Â Â Â[device specific fields]
> + * Â};
> + *
> + * The clock driver code will manage the device-specific data, and pass
> + * clk_foo.clk to the common clock code. The clock driver will be called
> + * through the @ops callbacks.
> + *
> + * The @enable_count and @mutex members are initialised when a clock is
> + * registered with the arch-specific clock management code; the clock driver
> + * code does not need to handle these.
> + */
> +struct clk {
> +    const struct clk_ops  Â*ops;
> +    unsigned int      Âenable_count;
> +    struct mutex      Âmutex;
> +};
> +
> +#define INIT_CLK(o) { .ops = &o, }
> +
> +struct clk_ops {
> +    int       (*enable)(struct clk *);
> +    void      Â(*disable)(struct clk *);
> +    int       (*get)(struct clk *);
> +    void      Â(*put)(struct clk *);
> +    unsigned long  (*get_rate)(struct clk *);
> +    long      Â(*round_rate)(struct clk *, unsigned long);
> +    int       (*set_rate)(struct clk *, unsigned long);
> +    int       (*set_parent)(struct clk *, struct clk *);
> + Â Â Â struct clk * Â Â(*get_parent)(struct clk *);
> +};
> +
> +/**
> + * __clk_get - update clock-specific refcounter
> + *
> + * @clk: The clock to refcount
> + *
> + * Before a clock is returned from clk_get, this function should be called
> + * to update any clock-specific refcounting.
> + *
> + * Returns non-zero on success, zero on failure.
> + *
> + * Drivers should not need this function; it is only needed by the
> + * arch-specific clk_get() implementations.
> Â*/
> +int __clk_get(struct clk *clk);
>
> +#else /* !CONFIG_USE_COMMON_STRUCT_CLK */
>
> Â/*
> - * struct clk - an machine class defined object / cookie.
> + * Global clock object, actual structure is declared per-machine
> Â*/
> Âstruct clk;
>
> +#endif /* !CONFIG_USE_COMMON_STRUCT_CLK */
> +
> Â/**
> Â* clk_get - lookup and obtain a reference to a clock producer.
> Â* @dev: device for clock "consumer"
> @@ -83,12 +148,6 @@ unsigned long clk_get_rate(struct clk *clk);
> Â*/
> Âvoid clk_put(struct clk *clk);
>
> -
> -/*
> - * The remaining APIs are optional for machine class support.
> - */
> -
> -
> Â/**
> Â* clk_round_rate - adjust a rate to the exact rate a clock can provide
> Â* @clk: clock source
> diff --git a/kernel/Makefile b/kernel/Makefile
> index 057472f..1ae15aa 100644
> --- a/kernel/Makefile
> +++ b/kernel/Makefile
> @@ -105,6 +105,7 @@ obj-$(CONFIG_PERF_EVENTS) += perf_event.o
> Âobj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
> Âobj-$(CONFIG_USER_RETURN_NOTIFIER) += user-return-notifier.o
> Âobj-$(CONFIG_PADATA) += padata.o
> +obj-$(CONFIG_USE_COMMON_STRUCT_CLK) += clk.o
>
> Âifneq ($(CONFIG_SCHED_OMIT_FRAME_POINTER),y)
> Â# According to Alan Modra <alan@xxxxxxxxxxxxxxxx>, the -fno-omit-frame-pointer is
> diff --git a/kernel/clk.c b/kernel/clk.c
> new file mode 100644
> index 0000000..cdea25f
> --- /dev/null
> +++ b/kernel/clk.c
> @@ -0,0 +1,101 @@
> +/*
> + * Copyright (C) 2010 Canonical Ltd <jeremy.kerr@xxxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * Standard functionality for the common clock API.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/mutex.h>
> +#include <linux/module.h>
> +
> +int clk_enable(struct clk *clk)
> +{
> + Â Â Â int ret = 0;
> +
> + Â Â Â if (!clk->ops->enable)
> + Â Â Â Â Â Â Â return 0;

Wouldn't it be better (safer?) to check "clk" and "clk->ops" before
accessing clk->ops->enable?
For example,

        if (IS_ERR_OR_NULL(clk))
                return -EINVAL;

        if (!clk->ops || !clk->ops->enable)
                return 0;

Or, do you think it'd be better not to check and save some time?

Anyway, if we intend to check the input, the patch for the patch
including kernel/clk.c would be...

----------------------------------------------------
diff --git a/kernel/clk.c b/kernel/clk.c
index 32f25ef..c35f0ac 100644
--- a/kernel/clk.c
+++ b/kernel/clk.c
@@ -16,7 +16,10 @@ int clk_enable(struct clk *clk)
 {
        int ret = 0;

-       if (!clk->ops->enable)
+       if (IS_ERR_OR_NULL(clk))
+               return -EINVAL;
+
+       if (!clk->ops || !clk->ops->enable)
                return 0;

        mutex_lock(&clk->mutex);
@@ -33,7 +36,12 @@ EXPORT_SYMBOL_GPL(clk_enable);

 void clk_disable(struct clk *clk)
 {
-       if (!clk->ops->disable)
+       if (IS_ERR_OR_NULL(clk)) {
+               printk(KERN_ERR "clk_disable(NULL) is called.\n");
+               return;
+       }
+
+       if (!clk->ops || !clk->ops->disable)
                return;

        mutex_lock(&clk->mutex);
@@ -47,7 +55,9 @@ EXPORT_SYMBOL_GPL(clk_disable);

 unsigned long clk_get_rate(struct clk *clk)
 {
-       if (clk->ops->get_rate)
+       if (IS_ERR_OR_NULL(clk))
+               return -EINVAL;
+       if (clk->ops && clk->ops->get_rate)
                return clk->ops->get_rate(clk);
        return 0;
 }
@@ -55,7 +65,9 @@ EXPORT_SYMBOL_GPL(clk_get_rate);

 int __clk_get(struct clk *clk)
 {
-       if (clk->ops->get)
+       if (IS_ERR_OR_NULL(clk))
+               return -EINVAL;
+       if (clk->ops && clk->ops->get)
                return clk->ops->get(clk);
        return 1;
 }
@@ -63,14 +75,19 @@ EXPORT_SYMBOL_GPL(__clk_get);

 void clk_put(struct clk *clk)
 {
-       if (clk->ops->put)
+       if (IS_ERR_OR_NULL(clk)) {
+               printk(KERN_ERR "clk_disable(NULL) is called.\n");
+               return;
+       }
+
+       if (clk->ops && clk->ops->put)
                clk->ops->put(clk);
 }
 EXPORT_SYMBOL_GPL(clk_put);

 long clk_round_rate(struct clk *clk, unsigned long rate)
 {
-       if (clk->ops->round_rate)
+       if (!IS_ERR_OR_NULL(clk) && clk->ops && clk->ops->round_rate)
                return clk->ops->round_rate(clk, rate);
        return -ENOSYS;
 }
@@ -78,7 +95,7 @@ EXPORT_SYMBOL_GPL(clk_round_rate);

 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
-       if (clk->ops->set_rate)
+       if (!IS_ERR_OR_NULL(clk) && clk->ops && clk->ops->set_rate)
                return clk->ops->set_rate(clk, rate);
        return -ENOSYS;
 }
@@ -86,7 +103,7 @@ EXPORT_SYMBOL_GPL(clk_set_rate);

 int clk_set_parent(struct clk *clk, struct clk *parent)
 {
-       if (clk->ops->set_parent)
+       if (!IS_ERR_OR_NULL(clk) && clk->ops && clk->ops->set_parent)
                return clk->ops->set_parent(clk, parent);
        return -ENOSYS;
 }
@@ -94,7 +111,7 @@ EXPORT_SYMBOL_GPL(clk_set_parent);

 struct clk *clk_get_parent(struct clk *clk)
 {
-       if (clk->ops->get_parent)
+       if (!IS_ERR_OR_NULL(clk) && clk->ops && clk->ops->get_parent)
                return clk->ops->get_parent(clk);
        return ERR_PTR(-ENOSYS);
 }



> +
> + Â Â Â mutex_lock(&clk->mutex);
> + Â Â Â if (!clk->enable_count)
> + Â Â Â Â Â Â Â ret = clk->ops->enable(clk);
> +
> + Â Â Â if (!ret)
> + Â Â Â Â Â Â Â clk->enable_count++;
> + Â Â Â mutex_unlock(&clk->mutex);
> +
> + Â Â Â return ret;
> +}
> +EXPORT_SYMBOL_GPL(clk_enable);
> +
> +void clk_disable(struct clk *clk)
> +{
> + Â Â Â if (!clk->ops->disable)
> + Â Â Â Â Â Â Â return;
> +
> + Â Â Â mutex_lock(&clk->mutex);
> +
> + Â Â Â if (!--clk->enable_count)
> + Â Â Â Â Â Â Â clk->ops->disable(clk);
> +
> + Â Â Â mutex_unlock(&clk->mutex);
> +}
> +EXPORT_SYMBOL_GPL(clk_disable);
> +
> +unsigned long clk_get_rate(struct clk *clk)
> +{
> + Â Â Â if (clk->ops->get_rate)
> + Â Â Â Â Â Â Â return clk->ops->get_rate(clk);
> + Â Â Â return 0;
> +}
> +EXPORT_SYMBOL_GPL(clk_get_rate);
> +
> +int __clk_get(struct clk *clk)
> +{
> + Â Â Â if (clk->ops->get)
> + Â Â Â Â Â Â Â return clk->ops->get(clk);
> + Â Â Â return 1;
> +}
> +EXPORT_SYMBOL_GPL(__clk_get);
> +
> +void clk_put(struct clk *clk)
> +{
> + Â Â Â if (clk->ops->put)
> + Â Â Â Â Â Â Â clk->ops->put(clk);
> +}
> +EXPORT_SYMBOL_GPL(clk_put);
> +
> +long clk_round_rate(struct clk *clk, unsigned long rate)
> +{
> + Â Â Â if (clk->ops->round_rate)
> + Â Â Â Â Â Â Â return clk->ops->round_rate(clk, rate);
> + Â Â Â return -ENOSYS;
> +}
> +EXPORT_SYMBOL_GPL(clk_round_rate);
> +
> +int clk_set_rate(struct clk *clk, unsigned long rate)
> +{
> + Â Â Â if (clk->ops->set_rate)
> + Â Â Â Â Â Â Â return clk->ops->set_rate(clk, rate);
> + Â Â Â return -ENOSYS;
> +}
> +EXPORT_SYMBOL_GPL(clk_set_rate);
> +
> +int clk_set_parent(struct clk *clk, struct clk *parent)
> +{
> + Â Â Â if (clk->ops->set_parent)
> + Â Â Â Â Â Â Â return clk->ops->set_parent(clk, parent);
> + Â Â Â return -ENOSYS;
> +}
> +EXPORT_SYMBOL_GPL(clk_set_parent);
> +
> +struct clk *clk_get_parent(struct clk *clk)
> +{
> + Â Â Â if (clk->ops->get_parent)
> + Â Â Â Â Â Â Â return clk->ops->get_parent(clk);
> + Â Â Â return ERR_PTR(-ENOSYS);
> +}
> +EXPORT_SYMBOL_GPL(clk_get_parent);
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>



-- 
MyungJoo Ham (íëì), Ph.D.
Mobile Software Platform Lab,
Digital Media and Communications (DMC) Business
Samsung Electronics
cell: 82-10-6714-2858
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/