Re: BTRFS: Unbelievably slow with kvm/qemu

[Avi Kivity]

On 07/12/2010 08:24 AM, Giangiacomo Mariotti wrote:
> Hi, is it a known problem how much slow is Btrfs with kvm/qemu(meaning
> that the image kvm/qemu uses as the hd is on a partition formatted
> with Btrfs, not that the fs used by the hd inside the kvm environment
> is Btrfs, in fact inside kvm the / partition is formatted with ext3)?
> I haven't written down the exact numbers, because I forgot, but while
> I was trying to make it work, after I noticed how much longer than
> usual it was taking to just install the system, I took a look at iotop
> and it was reporting a write speed of the kvm process of approximately
> 3M/s, while the Btrfs kernel thread had an approximately write speed
> of 7K/s! Just formatting the partitions during the debian installation
> took minutes. When the actual installation of the distro started I had
> to stop it, because it was taking hours! The iotop results made me
> think that the problem could be Btrfs, but, to be sure that it wasn't
> instead a kvm/qemu problem, I cut/pasted the same virtual hd on an
> ext3 fs and started kvm with the same parameters as before. The
> installation of debian inside kvm this time went smoothly and fast,
> like normally it does. I've been using Btrfs for some time now and
> while it has never been a speed champion(and I guess it's not supposed
> to be one and I don't even really care that much about it), I've never
> had any noticeable performance problem before and it has always been
> quite stable. In this test case though, it seems to be doing very bad.
>
>    

Btrfs is very slow on sync writes:

$ fio --name=x --directory=/images --rw=randwrite --runtime=300 
--size=1G --filesize=1G --bs=4k --ioengine=psync --sync=1 --unlink=1
x: (g=0): rw=randwrite, bs=4K-4K/4K-4K, ioengine=psync, iodepth=1
Starting 1 process
x: Laying out IO file(s) (1 file(s) / 1024MB)
Jobs: 1 (f=1): [w] [1.3% done] [0K/0K /s] [0/0 iops] [eta 06h:18m:45s]
x: (groupid=0, jobs=1): err= 0: pid=2086
  write: io=13,752KB, bw=46,927B/s, iops=11, runt=300078msec
    clat (msec): min=33, max=1,711, avg=87.26, stdev=60.00
    bw (KB/s) : min=    5, max=  105, per=103.79%, avg=46.70, stdev=15.86
  cpu          : usr=0.03%, sys=19.55%, ctx=47197, majf=0, minf=94
  IO depths    : 1=100.0%, 2=0.0%, 4=0.0%, 8=0.0%, 16=0.0%, 32=0.0%, 
>=64=0.0%
     submit    : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, 
>=64=0.0%
     complete  : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, 
>=64=0.0%
     issued r/w: total=0/3438, short=0/0

     lat (msec): 50=3.40%, 100=75.63%, 250=19.14%, 500=1.40%, 750=0.35%
     lat (msec): 1000=0.06%, 2000=0.03%

Run status group 0 (all jobs):
  WRITE: io=13,752KB, aggrb=45KB/s, minb=46KB/s, maxb=46KB/s, 
mint=300078msec, maxt=300078msec

45KB/s, while 4-5MB/s traffic was actually going to the disk.  For every 
4KB that the the application writes, 400KB+ of metadata is written.

(It's actually worse, since it starts faster than the average and ends 
up slower than the average).

For kvm, you can try cache=writeback or cache=unsafe and get better 
performance (though still slower than ext*).

--
I have a truly marvellous patch that fixes the bug which this
signature is too narrow to contain.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/