Re: [PATCH 1/2] x86: fix keeping track of AMD C1E

From: H. Peter Anvin
Date: Tue Jul 13 2010 - 16:05:51 EST


[Adding Borislav and Hans to the Cc: list]

Any objections? Otherwise I'm going to queue this up in the urgent queue.

-hpa


On 07/13/2010 11:59 AM, Michal Schmidt wrote:
> On my system with AMD Phenom II X6 I am seeing pauses at boot (usually during
> udev startup) which require a key press to continue. It only happens if C1E is
> enabled in the BIOS.
>
> It's caused by the APIC timer's inability to wake up the CPU from C1E (AMD
> erratum #400). Linux has a workaround for it, but it's not being applied
> correctly in this case. Though c1e_idle() detects C1E just fine, by the time
> acpi_idle ('processor.ko' module) takes over, it is forgotten.
>
> After AMD C1E is detected, it is not sufficient to flag it in boot_cpu_data,
> because the flag will get cleared in identify_cpu() when more CPUs are brought
> up later. The fix is to mark the flag as forced.
>
> The additional call to set_cpu_cap() is just to make sure the flag is set even
> on the CPUs that are already up and /proc/cpuinfo shows 'amdc1e' on all.
>
> Also fix indentation in the function.
>
> Signed-off-by: Michal Schmidt <mschmidt@xxxxxxxxxx>
> ---
>
> arch/x86/kernel/process.c | 9 +++++----
> 1 files changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
> index e7e3521..f3520a8 100644
> --- a/arch/x86/kernel/process.c
> +++ b/arch/x86/kernel/process.c
> @@ -589,7 +589,7 @@ static void c1e_idle(void)
> if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
> mark_tsc_unstable("TSC halt in AMD C1E");
> printk(KERN_INFO "System has AMD C1E enabled\n");
> - set_cpu_cap(&boot_cpu_data, X86_FEATURE_AMDC1E);
> + setup_force_cpu_cap(X86_FEATURE_AMDC1E);
> }
> }
>
> @@ -605,6 +605,7 @@ static void c1e_idle(void)
> &cpu);
> printk(KERN_INFO "Switch to broadcast mode on CPU%d\n",
> cpu);
> + set_cpu_cap(&current_cpu_data, X86_FEATURE_AMDC1E);
> }
> clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
>
> @@ -614,9 +615,9 @@ static void c1e_idle(void)
> * The switch back from broadcast mode needs to be
> * called with interrupts disabled.
> */
> - local_irq_disable();
> - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
> - local_irq_enable();
> + local_irq_disable();
> + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
> + local_irq_enable();
> } else
> default_idle();
> }
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/