Re: [PATCH 1/2] Remove REDWOOD_[456] config options and conditionalcode

From: Josh Boyer
Date: Fri Jul 16 2010 - 10:21:58 EST

On Fri, Jul 16, 2010 at 02:29:02PM +0200, Christian Dietrich wrote:
>The config options for REDWOOD_[456] were commented out in the powerpc
>Kconfig. The ifdefs referencing this options therefore are dead and all
>references to this can be removed (Also dependencies in other KConfig
>files).
>
>Signed-off-by: Christian Dietrich <qy03fugy@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
>Signed-off-by: Christoph Egger <siccegge@xxxxxxxxx>

This seems fine with me.

The only question is which tree it coms through. I'm happy to take it
in via mine if the netdev and MTD people are fine with that. Otherwise,
my ack is below.

Acked-by: Josh Boyer <jwboyer@xxxxxxxxxxxxxxxxxx>

josh

>---
> arch/powerpc/platforms/40x/Kconfig | 16 -------------
> drivers/mtd/maps/Kconfig | 2 +-
> drivers/mtd/maps/redwood.c | 43 ------------------------------------
> drivers/net/Kconfig | 2 +-
> drivers/net/smc91x.h | 37 -------------------------------
> 5 files changed, 2 insertions(+), 98 deletions(-)
>
>diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
>index ec64264..b721764 100644
>--- a/arch/powerpc/platforms/40x/Kconfig
>+++ b/arch/powerpc/platforms/40x/Kconfig
>@@ -71,22 +71,6 @@ config MAKALU
> help
> This option enables support for the AMCC PPC405EX board.
>
>-#config REDWOOD_5
>-# bool "Redwood-5"
>-# depends on 40x
>-# default n
>-# select STB03xxx
>-# help
>-# This option enables support for the IBM STB04 evaluation board.
>-
>-#config REDWOOD_6
>-# bool "Redwood-6"
>-# depends on 40x
>-# default n
>-# select STB03xxx
>-# help
>-# This option enables support for the IBM STBx25xx evaluation board.
>-
> #config SYCAMORE
> # bool "Sycamore"
> # depends on 40x
>diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
>index f22bc9f..6629d09 100644
>--- a/drivers/mtd/maps/Kconfig
>+++ b/drivers/mtd/maps/Kconfig
>@@ -321,7 +321,7 @@ config MTD_CFI_FLAGADM
>
> config MTD_REDWOOD
> tristate "CFI Flash devices mapped on IBM Redwood"
>- depends on MTD_CFI && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 )
>+ depends on MTD_CFI
> help
> This enables access routines for the flash chips on the IBM
> Redwood board. If you have one of these boards and would like to
>diff --git a/drivers/mtd/maps/redwood.c b/drivers/mtd/maps/redwood.c
>index 933c0b6..d2c9db0 100644
>--- a/drivers/mtd/maps/redwood.c
>+++ b/drivers/mtd/maps/redwood.c
>@@ -22,8 +22,6 @@
>
> #include <asm/io.h>
>
>-#if !defined (CONFIG_REDWOOD_6)
>-
> #define WINDOW_ADDR 0xffc00000
> #define WINDOW_SIZE 0x00400000
>
>@@ -69,47 +67,6 @@ static struct mtd_partition redwood_flash_partitions[] = {
> }
> };
>
>-#else /* CONFIG_REDWOOD_6 */
>-/* FIXME: the window is bigger - armin */
>-#define WINDOW_ADDR 0xff800000
>-#define WINDOW_SIZE 0x00800000
>-
>-#define RW_PART0_OF 0
>-#define RW_PART0_SZ 0x400000 /* 4 MiB data */
>-#define RW_PART1_OF RW_PART0_OF + RW_PART0_SZ
>-#define RW_PART1_SZ 0x10000 /* 64K VPD */
>-#define RW_PART2_OF RW_PART1_OF + RW_PART1_SZ
>-#define RW_PART2_SZ 0x400000 - (0x10000 + 0x20000)
>-#define RW_PART3_OF RW_PART2_OF + RW_PART2_SZ
>-#define RW_PART3_SZ 0x20000
>-
>-static struct mtd_partition redwood_flash_partitions[] = {
>- {
>- .name = "Redwood filesystem",
>- .offset = RW_PART0_OF,
>- .size = RW_PART0_SZ
>- },
>- {
>- .name = "Redwood OpenBIOS Vital Product Data",
>- .offset = RW_PART1_OF,
>- .size = RW_PART1_SZ,
>- .mask_flags = MTD_WRITEABLE /* force read-only */
>- },
>- {
>- .name = "Redwood kernel",
>- .offset = RW_PART2_OF,
>- .size = RW_PART2_SZ
>- },
>- {
>- .name = "Redwood OpenBIOS",
>- .offset = RW_PART3_OF,
>- .size = RW_PART3_SZ,
>- .mask_flags = MTD_WRITEABLE /* force read-only */
>- }
>-};
>-
>-#endif /* CONFIG_REDWOOD_6 */
>-
> struct map_info redwood_flash_map = {
> .name = "IBM Redwood",
> .size = WINDOW_SIZE,
>diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
>index ce2fcdd..313d306 100644
>--- a/drivers/net/Kconfig
>+++ b/drivers/net/Kconfig
>@@ -913,7 +913,7 @@ config SMC91X
> tristate "SMC 91C9x/91C1xxx support"
> select CRC32
> select MII
>- depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \
>+ depends on ARM || M32R || SUPERH || \
> MIPS || BLACKFIN || MN10300 || COLDFIRE
> help
> This is a driver for SMC's 91x series of Ethernet chipsets,
>diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
>index 8d2772c..ee74791 100644
>--- a/drivers/net/smc91x.h
>+++ b/drivers/net/smc91x.h
>@@ -83,43 +83,6 @@ static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg)
> }
> }
>
>-#elif defined(CONFIG_REDWOOD_5) || defined(CONFIG_REDWOOD_6)
>-
>-/* We can only do 16-bit reads and writes in the static memory space. */
>-#define SMC_CAN_USE_8BIT 0
>-#define SMC_CAN_USE_16BIT 1
>-#define SMC_CAN_USE_32BIT 0
>-#define SMC_NOWAIT 1
>-
>-#define SMC_IO_SHIFT 0
>-
>-#define SMC_inw(a, r) in_be16((volatile u16 *)((a) + (r)))
>-#define SMC_outw(v, a, r) out_be16((volatile u16 *)((a) + (r)), v)
>-#define SMC_insw(a, r, p, l) \
>- do { \
>- unsigned long __port = (a) + (r); \
>- u16 *__p = (u16 *)(p); \
>- int __l = (l); \
>- insw(__port, __p, __l); \
>- while (__l > 0) { \
>- *__p = swab16(*__p); \
>- __p++; \
>- __l--; \
>- } \
>- } while (0)
>-#define SMC_outsw(a, r, p, l) \
>- do { \
>- unsigned long __port = (a) + (r); \
>- u16 *__p = (u16 *)(p); \
>- int __l = (l); \
>- while (__l > 0) { \
>- /* Believe it or not, the swab isn't needed. */ \
>- outw( /* swab16 */ (*__p++), __port); \
>- __l--; \
>- } \
>- } while (0)
>-#define SMC_IRQ_FLAGS (0)
>-
> #elif defined(CONFIG_SA1100_PLEB)
> /* We can only do 16-bit reads and writes in the static memory space. */
> #define SMC_CAN_USE_8BIT 1
>--
>1.7.0.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/