Re: Interrupt Affinity in SMP

From: Bryan Hundven
Date: Mon Jul 19 2010 - 16:03:40 EST


On Mon, Jul 19, 2010 at 12:22 PM, Robert Hancock <hancockrwd@xxxxxxxxx> wrote:
> On Sat, Jul 17, 2010 at 2:02 PM, Bryan Hundven <bryanhundven@xxxxxxxxx> wrote:
>> Please see the two attached examples.
>>
>> Notice on the 5410 example how we start with the affinity set to 0xff,
>> and change it to 0xf0.
>> This should spread the interrupts over the last 4 cores of this quad
>> core - dual processor system.
>>
>> Also notice on the 5645 example, with the same commands we start with
>> 0xffffff and change to 0xfff000 to spread the interrupts over the last
>> 12 cores, but only the first of the last twelve cores receive
>> interrupts.
>>
>> This is the inconsistency I was trying to explain before.
>
> As I mentioned before, I believe the behavior in this case is chipset
> dependent, and potentially not something the kernel has control over.
> In most cases distributing the same interrupt across multiple cores is
> likely a bad idea in any case, unless the interrupt load is actually
> so high that a single CPU can't handle it.

Can anyone confirm that this is how the 5520 and newer xeon chipsets
handle affinity?

I might be totally wrong, but I thought that RSS (Receive Side
Scaling, which is available on the 82576 network card in that 5645
xeon example) helps in that scenario?

--Bryan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/