[PATCH] mfd-stmpe: add auto sleep feature

From: Sundar Iyer
Date: Wed Jul 21 2010 - 02:11:59 EST


From: Sundar R Iyer <sundar.iyer@xxxxxxxxxxxxxx>

Some STMPE devices support entering sleep mode automatically on a
specified timeout of inactivity on the I2C bus with the host system.

Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>
Acked-by: Rabin Vincent <rabin.vincent@xxxxxxxxxxxxxx>
Signed-off-by: Sundar R Iyer <sundar.iyer@xxxxxxxxxxxxxx>
---
drivers/mfd/stmpe.c | 70 +++++++++++++++++++++++++++++++++++++++++++++
drivers/mfd/stmpe.h | 7 ++++
include/linux/mfd/stmpe.h | 4 ++
3 files changed, 81 insertions(+), 0 deletions(-)

diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index a7f3099..0754c5e 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -455,6 +455,67 @@ static struct stmpe_variant_block stmpe1601_blocks[] = {
},
};

+/* supported autosleep timeout delay (in msecs) */
+static const int stmpe_autosleep_delay[] = {
+ 4, 16, 32, 64, 128, 256, 512, 1024,
+};
+
+static int stmpe_round_timeout(int timeout)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(stmpe_autosleep_delay); i++) {
+ if (stmpe_autosleep_delay[i] >= timeout)
+ return i;
+ }
+
+ /*
+ * requests for delays longer than supported should not return the
+ * longest supported delay
+ */
+ return -EINVAL;
+}
+
+static int stmpe_autosleep(struct stmpe *stmpe, int autosleep_timeout)
+{
+ int ret;
+
+ if (!stmpe->variant->enable_autosleep)
+ return -ENOSYS;
+
+ mutex_lock(&stmpe->lock);
+ ret = stmpe->variant->enable_autosleep(stmpe, autosleep_timeout);
+ mutex_unlock(&stmpe->lock);
+
+ return ret;
+}
+
+/*
+ * Both stmpe 1601/2403 support same layout for autosleep
+ */
+static int stmpe1601_autosleep(struct stmpe *stmpe,
+ int autosleep_timeout)
+{
+ int ret, timeout;
+
+ /* choose the best available timeout */
+ timeout = stmpe_round_timeout(autosleep_timeout);
+ if (timeout < 0) {
+ dev_err(stmpe->dev, "invalid timeout\n");
+ return timeout;
+ }
+
+ ret = __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL2,
+ STMPE1601_AUTOSLEEP_TIMEOUT_MASK,
+ timeout);
+ if (ret < 0)
+ return ret;
+
+ return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL2,
+ STPME1601_AUTOSLEEP_ENABLE,
+ STPME1601_AUTOSLEEP_ENABLE);
+}
+
static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks,
bool enable)
{
@@ -497,6 +558,7 @@ static struct stmpe_variant_info stmpe1601 = {
.num_irqs = STMPE1601_NR_INTERNAL_IRQS,
.enable = stmpe1601_enable,
.get_altfunc = stmpe1601_get_altfunc,
+ .enable_autosleep = stmpe1601_autosleep,
};

/*
@@ -589,6 +651,7 @@ static struct stmpe_variant_info stmpe2403 = {
.num_irqs = STMPE24XX_NR_INTERNAL_IRQS,
.enable = stmpe24xx_enable,
.get_altfunc = stmpe24xx_get_altfunc,
+ .enable_autosleep = stmpe1601_autosleep, /* same as stmpe1601 */
};

static struct stmpe_variant_info *stmpe_variant_info[] = {
@@ -731,6 +794,7 @@ static void stmpe_irq_remove(struct stmpe *stmpe)
static int __devinit stmpe_chip_init(struct stmpe *stmpe)
{
unsigned int irq_trigger = stmpe->pdata->irq_trigger;
+ int autosleep_timeout = stmpe->pdata->autosleep_timeout;
struct stmpe_variant_info *variant = stmpe->variant;
u8 icr = STMPE_ICR_LSB_GIM;
unsigned int id;
@@ -766,6 +830,12 @@ static int __devinit stmpe_chip_init(struct stmpe *stmpe)
if (stmpe->pdata->irq_invert_polarity)
icr ^= STMPE_ICR_LSB_HIGH;

+ if (stmpe->pdata->autosleep) {
+ ret = stmpe_autosleep(stmpe, autosleep_timeout);
+ if (ret)
+ return ret;
+ }
+
return stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_ICR_LSB], icr);
}

diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
index 991f0ec..0dbdc4e 100644
--- a/drivers/mfd/stmpe.h
+++ b/drivers/mfd/stmpe.h
@@ -49,6 +49,7 @@ struct stmpe_variant_block {
* Called with the I/O lock held.
* @get_altfunc: callback to get the alternate function number for the
* specific block
+ * @enable_autosleep: callback to configure autosleep with specified timeout
*/
struct stmpe_variant_info {
const char *name;
@@ -62,6 +63,7 @@ struct stmpe_variant_info {
int num_irqs;
int (*enable)(struct stmpe *stmpe, unsigned int blocks, bool enable);
int (*get_altfunc)(struct stmpe *stmpe, enum stmpe_block block);
+ int (*enable_autosleep)(struct stmpe *stmpe, int autosleep_timeout);
};

#define STMPE_ICR_LSB_HIGH (1 << 2)
@@ -118,6 +120,7 @@ struct stmpe_variant_info {
#define STMPE1601_NR_INTERNAL_IRQS 9

#define STMPE1601_REG_SYS_CTRL 0x02
+#define STMPE1601_REG_SYS_CTRL2 0x03
#define STMPE1601_REG_ICR_LSB 0x11
#define STMPE1601_REG_IER_LSB 0x13
#define STMPE1601_REG_ISR_MSB 0x14
@@ -137,6 +140,10 @@ struct stmpe_variant_info {
#define STMPE1601_SYS_CTRL_ENABLE_KPC (1 << 1)
#define STMPE1601_SYSCON_ENABLE_SPWM (1 << 0)

+/* The 1601/2403 share the same masks */
+#define STMPE1601_AUTOSLEEP_TIMEOUT_MASK (0x7)
+#define STPME1601_AUTOSLEEP_ENABLE (1 << 3)
+
/*
* STMPE24xx
*/
diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
index 90faa98..39ca758 100644
--- a/include/linux/mfd/stmpe.h
+++ b/include/linux/mfd/stmpe.h
@@ -170,6 +170,8 @@ struct stmpe_ts_platform_data {
* @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*)
* @irq_trigger: IRQ trigger to use for the interrupt to the host
* @irq_invert_polarity: IRQ line is connected with reversed polarity
+ * @autosleep: bool to enable/disable stmpe autosleep
+ * @autosleep_timeout: inactivity timeout in milliseconds for autosleep
* @irq_base: base IRQ number. %STMPE_NR_IRQS irqs will be used, or
* %STMPE_NR_INTERNAL_IRQS if the GPIO driver is not used.
* @gpio: GPIO-specific platform data
@@ -182,6 +184,8 @@ struct stmpe_platform_data {
int irq_base;
unsigned int irq_trigger;
bool irq_invert_polarity;
+ bool autosleep;
+ int autosleep_timeout;

struct stmpe_gpio_platform_data *gpio;
struct stmpe_keypad_platform_data *keypad;
--
1.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/