[083/165] ext4, jbd2: Add barriers for file systems with exernal journals

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

commit cc3e1bea5d87635c519da657303690f5538bb4eb upstream (as of v2.6.33-rc3)

This is a bit complicated because we are trying to optimize when we
send barriers to the fs data disk.  We could just throw in an extra
barrier to the data disk whenever we send a barrier to the journal
disk, but that's not always strictly necessary.

We only need to send a barrier during a commit when there are data
blocks which are must be written out due to an inode written in
ordered mode, or if fsync() depends on the commit to force data blocks
to disk.  Finally, before we drop transactions from the beginning of
the journal during a checkpoint operation, we need to guarantee that
any blocks that were flushed out to the data disk are firmly on the
rust platter before we drop the transaction from the journal.

Thanks to Oleg Drokin for pointing out this flaw in ext3/ext4.

Signed-off-by: "Theodore Ts'o" <tytso@xxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
 fs/ext4/fsync.c      |   16 ++++++++++++++--
 fs/jbd2/checkpoint.c |   15 +++++++++++++++
 fs/jbd2/commit.c     |   19 +++++++++++--------
 include/linux/jbd2.h |    1 +
 4 files changed, 41 insertions(+), 10 deletions(-)

--- a/fs/ext4/fsync.c
+++ b/fs/ext4/fsync.c
@@ -88,9 +88,21 @@ int ext4_sync_file(struct file *file, st
 		return ext4_force_commit(inode->i_sb);
 
 	commit_tid = datasync ? ei->i_datasync_tid : ei->i_sync_tid;
-	if (jbd2_log_start_commit(journal, commit_tid))
+	if (jbd2_log_start_commit(journal, commit_tid)) {
+		/*
+		 * When the journal is on a different device than the
+		 * fs data disk, we need to issue the barrier in
+		 * writeback mode.  (In ordered mode, the jbd2 layer
+		 * will take care of issuing the barrier.  In
+		 * data=journal, all of the data blocks are written to
+		 * the journal device.)
+		 */
+		if (ext4_should_writeback_data(inode) &&
+		    (journal->j_fs_dev != journal->j_dev) &&
+		    (journal->j_flags & JBD2_BARRIER))
+			blkdev_issue_flush(inode->i_sb->s_bdev, NULL);
 		jbd2_log_wait_commit(journal, commit_tid);
-	else if (journal->j_flags & JBD2_BARRIER)
+	} else if (journal->j_flags & JBD2_BARRIER)
 		blkdev_issue_flush(inode->i_sb->s_bdev, NULL);
 	return ret;
 }
--- a/fs/jbd2/checkpoint.c
+++ b/fs/jbd2/checkpoint.c
@@ -22,6 +22,7 @@
 #include <linux/jbd2.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
+#include <linux/blkdev.h>
 #include <trace/events/jbd2.h>
 
 /*
@@ -515,6 +516,20 @@ int jbd2_cleanup_journal_tail(journal_t
 	journal->j_tail_sequence = first_tid;
 	journal->j_tail = blocknr;
 	spin_unlock(&journal->j_state_lock);
+
+	/*
+	 * If there is an external journal, we need to make sure that
+	 * any data blocks that were recently written out --- perhaps
+	 * by jbd2_log_do_checkpoint() --- are flushed out before we
+	 * drop the transactions from the external journal.  It's
+	 * unlikely this will be necessary, especially with a
+	 * appropriately sized journal, but we need this to guarantee
+	 * correctness.  Fortunately jbd2_cleanup_journal_tail()
+	 * doesn't get called all that often.
+	 */
+	if ((journal->j_fs_dev != journal->j_dev) &&
+	    (journal->j_flags & JBD2_BARRIER))
+		blkdev_issue_flush(journal->j_fs_dev, NULL);
 	if (!(journal->j_flags & JBD2_ABORT))
 		jbd2_journal_update_superblock(journal, 1);
 	return 0;
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -259,6 +259,7 @@ static int journal_submit_data_buffers(j
 			ret = err;
 		spin_lock(&journal->j_list_lock);
 		J_ASSERT(jinode->i_transaction == commit_transaction);
+		commit_transaction->t_flushed_data_blocks = 1;
 		jinode->i_flags &= ~JI_COMMIT_RUNNING;
 		wake_up_bit(&jinode->i_flags, __JI_COMMIT_RUNNING);
 	}
@@ -708,8 +709,17 @@ start_journal_io:
 		}
 	}
 
-	/* Done it all: now write the commit record asynchronously. */
+	/*
+	 * If the journal is not located on the file system device,
+	 * then we must flush the file system device before we issue
+	 * the commit record
+	 */
+	if (commit_transaction->t_flushed_data_blocks &&
+	    (journal->j_fs_dev != journal->j_dev) &&
+	    (journal->j_flags & JBD2_BARRIER))
+		blkdev_issue_flush(journal->j_fs_dev, NULL);
 
+	/* Done it all: now write the commit record asynchronously. */
 	if (JBD2_HAS_INCOMPAT_FEATURE(journal,
 				      JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)) {
 		err = journal_submit_commit_record(journal, commit_transaction,
@@ -720,13 +730,6 @@ start_journal_io:
 			blkdev_issue_flush(journal->j_dev, NULL);
 	}
 
-	/*
-	 * This is the right place to wait for data buffers both for ASYNC
-	 * and !ASYNC commit. If commit is ASYNC, we need to wait only after
-	 * the commit block went to disk (which happens above). If commit is
-	 * SYNC, we need to wait for data buffers before we start writing
-	 * commit block, which happens below in such setting.
-	 */
 	err = journal_finish_inode_data_buffers(journal, commit_transaction);
 	if (err) {
 		printk(KERN_WARNING
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -653,6 +653,7 @@ struct transaction_s
 	 * waiting for it to finish.
 	 */
 	unsigned int t_synchronous_commit:1;
+	unsigned int t_flushed_data_blocks:1;
 
 	/*
 	 * For use by the filesystem to store fs-specific data


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/