Re: [RFC][PATCH] adddma_reserve_coherent_memory()/dma_free_reserved_memory() API

[Uwe Kleine-König]

Hey,

On Fri, Aug 27, 2010 at 02:00:17PM +0900, FUJITA Tomonori wrote:
> On Fri, 27 Aug 2010 06:41:42 +0200
> Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> wrote:
> > On Thu, Aug 26, 2010 at 07:00:24PM +0900, FUJITA Tomonori wrote:
> > > On Thu, 26 Aug 2010 11:53:11 +0200
> > > Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> wrote:
> > > 
> > > > > > We have currently a number of boards broken in the mainline. They must be 
> > > > > > fixed for 2.6.36. I don't think the mentioned API will do this for us. So, 
> > > > > > as I suggested earlier, we need either this or my patch series
> > > > > > 
> > > > > > http://thread.gmane.org/gmane.linux.ports.sh.devel/8595
> > > > > > 
> > > > > > for 2.6.36.
> > > > > 
> > > > > Why can't you revert a commit that causes the regression?
> > > > > 
> > > > > The related DMA API wasn't changed in 2.6.36-rc1. The DMA API is not
> > > > > responsible for the regression. And the patchset even exnteds the
> > > > > definition of the DMA API (dma_declare_coherent_memory). Such change
> > > > > shouldn't applied after rc1. I think that DMA-API.txt says that
> > > > > dma_declare_coherent_memory() handles coherent memory for a particular
> > > > > device. It's not for the API that reserves coherent memory that can be
> > > > > used for any device for a single device.
> > > > The patch that made the problem obvious for ARM is
> > > > 309caa9cc6ff39d261264ec4ff10e29489afc8f8 aka v2.6.36-rc1~591^2~2^4~12.
> > > > So this went in before v2.6.36-rc1.  One of the "architectures which
> > > > similar restrictions" is x86 BTW.
> > > > 
> > > > And no, we won't revert 309caa9cc6ff39d261264ec4ff10e29489afc8f8 as it
> > > > addresses a hardware restriction.
> > > 
> > > How these drivers were able to work without hitting the hardware restriction?
> > In my case the machine in question is an ARMv5, the hardware restriction
> > is on ARMv6+ only.  You could argue that so the breaking patch for arm
> > should only break ARMv6, but I don't think this is sensible from a
> > maintainers POV.  We need an API that works independant of the machine
> > that runs the code.
> 
> Agreed. But insisting that the DMA API needs to be extended wrongly
> after rc2 to fix the regression is not sensible too. The related DMA
> API wasn't changed in 2.6.36-rc1. The API isn't responsible for the
> regression at all.
I think this isn't about "responsiblity".  Someone in arm-land found
that the way dma memory allocation worked for some time doesn't work
anymore on new generation chips.  As pointing out this problem was
expected to find some matches it was merged in the merge window.  One
such match is the current usage of the DMA API that doesn't currently
offer a way to do it right, so it needs a patch, no?

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/