[PATCH (v2)] cxacru: Use a bulk/int URB to access the command endpoint

From: Simon Arlott
Date: Wed Sep 01 2010 - 13:37:22 EST


The command endpoint is either a bulk or interrupt endpoint, but using
the wrong type of transfer causes an error if CONFIG_USB_DEBUG is
enabled after commit f661c6f8c67bd55e93348f160d590ff9edf08904, which
checks for this mismatch.

Detect which type of endpoint it is and use a bulk/int URB as
appropriate. There are other function calls specifying a bulk pipe,
but usb_clear_halt doesn't use the pipe type (only the endpoint) and
usb_bulk_msg auto-detects interrupt transfers.

Signed-off-by: Simon Arlott <simon@xxxxxxxxxxx>
---
drivers/usb/atm/cxacru.c | 24 ++++++++++++++++++++++--
1 files changed, 22 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 593fc5e..5af23cc 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -1127,6 +1127,7 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
{
struct cxacru_data *instance;
struct usb_device *usb_dev = interface_to_usbdev(intf);
+ struct usb_host_endpoint *cmd_ep = usb_dev->ep_in[CXACRU_EP_CMD];
int ret;

/* instance init */
@@ -1171,15 +1172,34 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
goto fail;
}

- usb_fill_int_urb(instance->rcv_urb,
+ if (!cmd_ep) {
+ dbg("cxacru_bind: no command endpoint");
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ if ((cmd_ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_INT) {
+ usb_fill_int_urb(instance->rcv_urb,
usb_dev, usb_rcvintpipe(usb_dev, CXACRU_EP_CMD),
instance->rcv_buf, PAGE_SIZE,
cxacru_blocking_completion, &instance->rcv_done, 1);

- usb_fill_int_urb(instance->snd_urb,
+ usb_fill_int_urb(instance->snd_urb,
usb_dev, usb_sndintpipe(usb_dev, CXACRU_EP_CMD),
instance->snd_buf, PAGE_SIZE,
cxacru_blocking_completion, &instance->snd_done, 4);
+ } else {
+ usb_fill_bulk_urb(instance->rcv_urb,
+ usb_dev, usb_rcvbulkpipe(usb_dev, CXACRU_EP_CMD),
+ instance->rcv_buf, PAGE_SIZE,
+ cxacru_blocking_completion, &instance->rcv_done);
+
+ usb_fill_bulk_urb(instance->snd_urb,
+ usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD),
+ instance->snd_buf, PAGE_SIZE,
+ cxacru_blocking_completion, &instance->snd_done);
+ }

mutex_init(&instance->cm_serialize);

--
1.7.0.4

--
Simon Arlott
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/