[PATCH v2] lis3: Add support for new LIS3DC / HP3DC chip

From: Takashi Iwai
Date: Thu Sep 23 2010 - 02:01:37 EST


A new version of LIS3 chip has slight incompatibilities from former
versions. This patch adds the minimal support for it.

Signed-off-by: Takashi Iwai <tiwai@xxxxxxx>
---
v1->v2
Rebased to patch "lis3: Fix Oops with NULL platform data (v2)"

drivers/hwmon/lis3lv02d.c | 35 +++++++++++++++++++++++++++--------
drivers/hwmon/lis3lv02d.h | 17 +++++++++++++++++
2 files changed, 44 insertions(+), 8 deletions(-)

diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
index 0a24177..2e0b034 100644
--- a/drivers/hwmon/lis3lv02d.c
+++ b/drivers/hwmon/lis3lv02d.c
@@ -162,6 +162,7 @@ static void lis3lv02d_get_xyz(struct lis3lv02d *lis3, int *x, int *y, int *z)
/* conversion btw sampling rate and the register values */
static int lis3_12_rates[4] = {40, 160, 640, 2560};
static int lis3_8_rates[2] = {100, 400};
+static int lis3_3dc_rates[16] = {0, 1, 10, 25, 50, 100, 200, 400, 1600, 5000};

/* ODR is Output Data Rate */
static int lis3lv02d_get_odr(void)
@@ -180,6 +181,9 @@ static int lis3lv02d_set_odr(int rate)
u8 ctrl;
int i, len, shift;

+ if (!rate)
+ return -EINVAL;
+
lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl);
ctrl &= ~lis3_dev.odr_mask;
len = 1 << hweight_long(lis3_dev.odr_mask); /* # of possible values */
@@ -196,19 +200,25 @@ static int lis3lv02d_set_odr(int rate)

static int lis3lv02d_selftest(struct lis3lv02d *lis3, s16 results[3])
{
- u8 reg;
+ u8 ctlreg, reg;
s16 x, y, z;
u8 selftest;
int ret;

mutex_lock(&lis3->mutex);
- if (lis3_dev.whoami == WAI_12B)
- selftest = CTRL1_ST;
- else
- selftest = CTRL1_STP;
+ if (lis3_dev.whoami == WAI_3DC) {
+ ctlreg = CTRL_REG4;
+ selftest = CTRL4_ST0;
+ } else {
+ ctlreg = CTRL_REG1;
+ if (lis3_dev.whoami == WAI_12B)
+ selftest = CTRL1_ST;
+ else
+ selftest = CTRL1_STP;
+ }

- lis3->read(lis3, CTRL_REG1, &reg);
- lis3->write(lis3, CTRL_REG1, (reg | selftest));
+ lis3->read(lis3, ctlreg, &reg);
+ lis3->write(lis3, ctlreg, (reg | selftest));
msleep(lis3->pwron_delay / lis3lv02d_get_odr());

/* Read directly to avoid axis remap */
@@ -217,7 +227,7 @@ static int lis3lv02d_selftest(struct lis3lv02d *lis3, s16 results[3])
z = lis3->read_data(lis3, OUTZ);

/* back to normal settings */
- lis3->write(lis3, CTRL_REG1, reg);
+ lis3->write(lis3, ctlreg, reg);
msleep(lis3->pwron_delay / lis3lv02d_get_odr());

results[0] = x - lis3->read_data(lis3, OUTX);
@@ -698,6 +708,15 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
dev->odr_mask = CTRL1_DR;
dev->scale = LIS3_SENSITIVITY_8B;
break;
+ case WAI_3DC:
+ printk(KERN_INFO DRIVER_NAME ": 8 bits 3DC sensor found\n");
+ dev->read_data = lis3lv02d_read_8;
+ dev->mdps_max_val = 128;
+ dev->pwron_delay = LIS3_PWRON_DELAY_WAI_8B;
+ dev->odrs = lis3_3dc_rates;
+ dev->odr_mask = CTRL1_ODR0|CTRL1_ODR1|CTRL1_ODR2|CTRL1_ODR3;
+ dev->scale = LIS3_SENSITIVITY_8B;
+ break;
default:
printk(KERN_ERR DRIVER_NAME
": unknown sensor type 0x%X\n", dev->whoami);
diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h
index 51b9ba4..94b0c4f 100644
--- a/drivers/hwmon/lis3lv02d.h
+++ b/drivers/hwmon/lis3lv02d.h
@@ -45,6 +45,7 @@ enum lis3_reg {
CTRL_REG1 = 0x20,
CTRL_REG2 = 0x21,
CTRL_REG3 = 0x22,
+ CTRL_REG4 = 0x23,
HP_FILTER_RESET = 0x23,
STATUS_REG = 0x27,
OUTX_L = 0x28,
@@ -93,6 +94,7 @@ enum lis3lv02d_reg {
};

enum lis3_who_am_i {
+ WAI_3DC = 0x33, /* 8 bits: LIS3DC, HP3DC */
WAI_12B = 0x3A, /* 12 bits: LIS3LV02D[LQ]... */
WAI_8B = 0x3B, /* 8 bits: LIS[23]02D[LQ]... */
WAI_6B = 0x52, /* 6 bits: LIS331DLF - not supported */
@@ -118,6 +120,13 @@ enum lis3lv02d_ctrl1_8b {
CTRL1_DR = 0x80,
};

+enum lis3lv02d_ctrl1_3dc {
+ CTRL1_ODR0 = 0x10,
+ CTRL1_ODR1 = 0x20,
+ CTRL1_ODR2 = 0x40,
+ CTRL1_ODR3 = 0x80,
+};
+
enum lis3lv02d_ctrl2 {
CTRL2_DAS = 0x01,
CTRL2_SIM = 0x02,
@@ -129,6 +138,14 @@ enum lis3lv02d_ctrl2 {
CTRL2_FS = 0x80, /* Full Scale selection */
};

+enum lis3lv02d_ctrl4_3dc {
+ CTRL4_SIM = 0x01,
+ CTRL4_ST0 = 0x02,
+ CTRL4_ST1 = 0x04,
+ CTRL4_FS0 = 0x10,
+ CTRL4_FS1 = 0x20,
+};
+
enum lis302d_ctrl2 {
HP_FF_WU2 = 0x08,
HP_FF_WU1 = 0x04,
--
1.7.2.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/