Re: -mm: xfs lockdep warning

From: Torsten Kaiser
Date: Tue Oct 05 2010 - 14:10:12 EST


On Tue, Oct 5, 2010 at 6:55 PM, Tejun Heo <tj@xxxxxxxxxx> wrote:
> On 10/05/2010 06:51 PM, Tejun Heo wrote:
>> On 10/05/2010 12:09 PM, Torsten Kaiser wrote:
>>> 2) the hang with 2.6.35-rc5 I have seen twice (triggered probably by
>>> high load while building KOffice on an tmpfs)
>>
>> The trace doesn't seem to firmly point at xfs locking up.  There are
>> md and dm crypt involved.  Are you sure this is locking up inside xfs?
>> Also, can you please enable frame pointers so that we can get more
>> reliable backtrace?
>>
>>> 3) the lockdep issue that started this thread and that I am seeing in
>>> mainline 2.6.36-rc5 and -rc6 and that seems to be rather easy to
>>> trigger for me.
>>>
>>> Because 3) is regarded as a false positive, it should not be the cause
>>> of 2)
>>
>> For now, let's not draw any conclusion or mix the issues.  I'll look
>> up the original thread and look into what the lockdep warning means.
>
> Ah, okay, David already looked into it and concluded it to be a
> spurious one.  Can you please attach full kernel message of the
> lockup?

Here is the complete log from bootup until the hang happened the second time.
I just logged into KDE and then started the upgrade of KOffice, which
meant that the package manager started to compile 4 programs each with
-j5. After a few minutes the load got to ~18 and probably at the point
where filecache and GCCs filled up my 4GB RAM the system got stuck.
The mouse so longer moved and SysRq+S did not work. The log was
captured via serial console on a second system.

I will try tomorrow with frame pointers enabled...

Torsten
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dffd0000 (usable)
[ 0.000000] BIOS-e820: 00000000dffd0000 - 00000000dffde000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dffde000 - 00000000e0000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdffd0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dffd0000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] RAMDISK: 37ec8000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fb080 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000dffd0100 00064 (v01 A_M_I_ OEMXSDT 04000713 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000dffd0290 000F4 (v03 A_M_I_ OEMFACP 04000713 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000dffd0450 04FC5 (v01 S0027 S0027000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dffde000 00040
[ 0.000000] ACPI: APIC 00000000dffd0390 00080 (v01 A_M_I_ OEMAPIC 04000713 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dffd0410 0003C (v01 A_M_I_ OEMMCFG 04000713 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000dffde040 00060 (v01 A_M_I_ AMI_OEM 04000713 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000dffd5420 00038 (v01 A_M_I_ OEMHPET0 04000713 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dffd5460 0003C (v01 A_M_I_ OEMMCFG 04000713 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000dffd54a0 00110 (v01 AMD HAMMER 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000dffd55b0 004F0 (v01 A_M_I_ POWERNOW 00000001 AMD 00000001)
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x02 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x03 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-80000000
[ 0.000000] SRAT: Node 1 PXM 1 80000000-e0000000
[ 0.000000] SRAT: Node 1 PXM 1 100000000-120000000
[ 0.000000] SRAT: Node 0 [0,a0000) + [100000,80000000) -> [0,80000000)
[ 0.000000] SRAT: Node 1 [80000000,e0000000) + [100000000,120000000) -> [80000000,120000000)
[ 0.000000] Initmem setup node 0 0000000000000000-0000000080000000
[ 0.000000] NODE_DATA [0000000001bb1240 - 0000000001bb323f]
[ 0.000000] Initmem setup node 1 0000000080000000-0000000120000000
[ 0.000000] NODE_DATA [0000000100000000 - 0000000100001fff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00080000
[ 0.000000] 1: 0x00080000 -> 0x000dffd0
[ 0.000000] 1: 0x00100000 -> 0x00120000
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880001c00000 s78592 r8192 d23808 u1048576
[ 0.000000] pcpu-alloc: s78592 r8192 d23808 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 [1] 2 3
[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1032302
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: fastboot earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty1 crypt_root=/dev/md3 radeon.modeset=1 video=1280x1024
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 20000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] Subtract (58 early reservations)
[ 0.000000] #1 [0001000000 - 0001bb03c8] TEXT DATA BSS
[ 0.000000] #2 [0037ec8000 - 0037ff0000] RAMDISK
[ 0.000000] #3 [0001bb1000 - 0001bb1238] BRK
[ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #6 [000009fc00 - 00000f16f0] BIOS reserved
[ 0.000000] #7 [00000f188c - 00000ff780] BIOS reserved
[ 0.000000] #8 [00000f16f0 - 00000f188c] MP-table mpc
[ 0.000000] #9 [0000001000 - 0000003000] TRAMPOLINE
[ 0.000000] #10 [0000008000 - 000000c000] PGTABLE
[ 0.000000] #11 [000000c000 - 000000d000] PGTABLE
[ 0.000000] #12 [0001bb1240 - 0001bb3240] NODE_DATA
[ 0.000000] #13 [0100000000 - 0100002000] NODE_DATA
[ 0.000000] #14 [0001bb3240 - 0001bb4240] BOOTMEM
[ 0.000000] #15 [0001bb0400 - 0001bb0580] BOOTMEM
[ 0.000000] #16 [0080000000 - 0080000180] BOOTMEM
[ 0.000000] #17 [00023b5000 - 00023b6000] BOOTMEM
[ 0.000000] #18 [00023b6000 - 00023b7000] BOOTMEM
[ 0.000000] #19 [0002400000 - 0004000000] MEMMAP 0
[ 0.000000] #20 [0100200000 - 0102000000] MEMMAP 1
[ 0.000000] #21 [0001bb0580 - 0001bb0700] BOOTMEM
[ 0.000000] #22 [0001bb4240 - 0001bc0240] BOOTMEM
[ 0.000000] #23 [0080000180 - 008000c180] BOOTMEM
[ 0.000000] #24 [008000c180 - 008000f180] BOOTMEM
[ 0.000000] #25 [0001bc1000 - 0001bc2000] BOOTMEM
[ 0.000000] #26 [0001bb0700 - 0001bb0741] BOOTMEM
[ 0.000000] #27 [0001bb0780 - 0001bb07c3] BOOTMEM
[ 0.000000] #28 [0001bb0800 - 0001bb0a68] BOOTMEM
[ 0.000000] #29 [0001bb0a80 - 0001bb0ae8] BOOTMEM
[ 0.000000] #30 [0001bb0b00 - 0001bb0b68] BOOTMEM
[ 0.000000] #31 [0001bb0b80 - 0001bb0be8] BOOTMEM
[ 0.000000] #32 [0001bb0c00 - 0001bb0c68] BOOTMEM
[ 0.000000] #33 [0001bb0c80 - 0001bb0ce8] BOOTMEM
[ 0.000000] #34 [0001bb0d00 - 0001bb0d68] BOOTMEM
[ 0.000000] #35 [0001bb0d80 - 0001bb0de8] BOOTMEM
[ 0.000000] #36 [0001bb0e00 - 0001bb0e68] BOOTMEM
[ 0.000000] #37 [0001bb0e80 - 0001bb0ee8] BOOTMEM
[ 0.000000] #38 [0001bb0f00 - 0001bb0f68] BOOTMEM
[ 0.000000] #39 [0001bb0f80 - 0001bb1000] BOOTMEM
[ 0.000000] #40 [0001bc0240 - 0001bc02c0] BOOTMEM
[ 0.000000] #41 [0001c00000 - 0001c1b000] BOOTMEM
[ 0.000000] #42 [0001d00000 - 0001d1b000] BOOTMEM
[ 0.000000] #43 [0080200000 - 008021b000] BOOTMEM
[ 0.000000] #44 [0080300000 - 008031b000] BOOTMEM
[ 0.000000] #45 [0001bc02c0 - 0001bc02d0] BOOTMEM
[ 0.000000] #46 [0001bc0300 - 0001bc0310] BOOTMEM
[ 0.000000] #47 [0001bc0340 - 0001bc0350] BOOTMEM
[ 0.000000] #48 [0001bc0380 - 0001bc03a0] BOOTMEM
[ 0.000000] #49 [0001bc03c0 - 0001bc0500] BOOTMEM
[ 0.000000] #50 [0001bc0500 - 0001bc0560] BOOTMEM
[ 0.000000] #51 [0001bc0580 - 0001bc05e0] BOOTMEM
[ 0.000000] #52 [0001bc2000 - 0001bca000] BOOTMEM
[ 0.000000] #53 [0020000000 - 0024000000] BOOTMEM
[ 0.000000] #54 [0004000000 - 0008000000] BOOTMEM
[ 0.000000] #55 [0001bca000 - 0001bea000] BOOTMEM
[ 0.000000] #56 [0001c1b000 - 0001c5b000] BOOTMEM
[ 0.000000] #57 [000000d000 - 0000015000] BOOTMEM
[ 0.000000] Memory: 3989044k/4718592k available (5525k kernel code, 524872k absent, 204676k reserved, 5367k data, 564k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 4
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:712
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty1] enabled, bootconsole disabled
[ 0.000000] Linux version 2.6.36-rc5 (root@treogen) (gcc version 4.4.4 (Gentoo 4.4.4-r2 p1.2, pie-0.4.5) ) #1 SMP Tue Sep 21 16:24:03 CEST 2010
[ 0.000000] Command line: fastboot earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty1 crypt_root=/dev/md3 radeon.modeset=1 video=1280x1024
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dffd0000 (usable)
[ 0.000000] BIOS-e820: 00000000dffd0000 - 00000000dffde000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dffde000 - 00000000e0000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdffd0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dffd0000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] RAMDISK: 37ec8000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fb080 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000dffd0100 00064 (v01 A_M_I_ OEMXSDT 04000713 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000dffd0290 000F4 (v03 A_M_I_ OEMFACP 04000713 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000dffd0450 04FC5 (v01 S0027 S0027000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dffde000 00040
[ 0.000000] ACPI: APIC 00000000dffd0390 00080 (v01 A_M_I_ OEMAPIC 04000713 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dffd0410 0003C (v01 A_M_I_ OEMMCFG 04000713 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000dffde040 00060 (v01 A_M_I_ AMI_OEM 04000713 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000dffd5420 00038 (v01 A_M_I_ OEMHPET0 04000713 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dffd5460 0003C (v01 A_M_I_ OEMMCFG 04000713 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000dffd54a0 00110 (v01 AMD HAMMER 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000dffd55b0 004F0 (v01 A_M_I_ POWERNOW 00000001 AMD 00000001)
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x02 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x03 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-80000000
[ 0.000000] SRAT: Node 1 PXM 1 80000000-e0000000
[ 0.000000] SRAT: Node 1 PXM 1 100000000-120000000
[ 0.000000] SRAT: Node 0 [0,a0000) + [100000,80000000) -> [0,80000000)
[ 0.000000] SRAT: Node 1 [80000000,e0000000) + [100000000,120000000) -> [80000000,120000000)
[ 0.000000] Initmem setup node 0 0000000000000000-0000000080000000
[ 0.000000] NODE_DATA [0000000001bb1240 - 0000000001bb323f]
[ 0.000000] Initmem setup node 1 0000000080000000-0000000120000000
[ 0.000000] NODE_DATA [0000000100000000 - 0000000100001fff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00080000
[ 0.000000] 1: 0x00080000 -> 0x000dffd0
[ 0.000000] 1: 0x00100000 -> 0x00120000
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880001c00000 s78592 r8192 d23808 u1048576
[ 0.000000] pcpu-alloc: s78592 r8192 d23808 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 [1] 2 3
[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1032302
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: fastboot earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty1 crypt_root=/dev/md3 radeon.modeset=1 video=1280x1024
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 20000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] Subtract (58 early reservations)
[ 0.000000] #1 [0001000000 - 0001bb03c8] TEXT DATA BSS
[ 0.000000] #2 [0037ec8000 - 0037ff0000] RAMDISK
[ 0.000000] #3 [0001bb1000 - 0001bb1238] BRK
[ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #6 [000009fc00 - 00000f16f0] BIOS reserved
[ 0.000000] #7 [00000f188c - 00000ff780] BIOS reserved
[ 0.000000] #8 [00000f16f0 - 00000f188c] MP-table mpc
[ 0.000000] #9 [0000001000 - 0000003000] TRAMPOLINE
[ 0.000000] #10 [0000008000 - 000000c000] PGTABLE
[ 0.000000] #11 [000000c000 - 000000d000] PGTABLE
[ 0.000000] #12 [0001bb1240 - 0001bb3240] NODE_DATA
[ 0.000000] #13 [0100000000 - 0100002000] NODE_DATA
[ 0.000000] #14 [0001bb3240 - 0001bb4240] BOOTMEM
[ 0.000000] #15 [0001bb0400 - 0001bb0580] BOOTMEM
[ 0.000000] #16 [0080000000 - 0080000180] BOOTMEM
[ 0.000000] #17 [00023b5000 - 00023b6000] BOOTMEM
[ 0.000000] #18 [00023b6000 - 00023b7000] BOOTMEM
[ 0.000000] #19 [0002400000 - 0004000000] MEMMAP 0
[ 0.000000] #20 [0100200000 - 0102000000] MEMMAP 1
[ 0.000000] #21 [0001bb0580 - 0001bb0700] BOOTMEM
[ 0.000000] #22 [0001bb4240 - 0001bc0240] BOOTMEM
[ 0.000000] #23 [0080000180 - 008000c180] BOOTMEM
[ 0.000000] #24 [008000c180 - 008000f180] BOOTMEM
[ 0.000000] #25 [0001bc1000 - 0001bc2000] BOOTMEM
[ 0.000000] #26 [0001bb0700 - 0001bb0741] BOOTMEM
[ 0.000000] #27 [0001bb0780 - 0001bb07c3] BOOTMEM
[ 0.000000] #28 [0001bb0800 - 0001bb0a68] BOOTMEM
[ 0.000000] #29 [0001bb0a80 - 0001bb0ae8] BOOTMEM
[ 0.000000] #30 [0001bb0b00 - 0001bb0b68] BOOTMEM
[ 0.000000] #31 [0001bb0b80 - 0001bb0be8] BOOTMEM
[ 0.000000] #32 [0001bb0c00 - 0001bb0c68] BOOTMEM
[ 0.000000] #33 [0001bb0c80 - 0001bb0ce8] BOOTMEM
[ 0.000000] #34 [0001bb0d00 - 0001bb0d68] BOOTMEM
[ 0.000000] #35 [0001bb0d80 - 0001bb0de8] BOOTMEM
[ 0.000000] #36 [0001bb0e00 - 0001bb0e68] BOOTMEM
[ 0.000000] #37 [0001bb0e80 - 0001bb0ee8] BOOTMEM
[ 0.000000] #38 [0001bb0f00 - 0001bb0f68] BOOTMEM
[ 0.000000] #39 [0001bb0f80 - 0001bb1000] BOOTMEM
[ 0.000000] #40 [0001bc0240 - 0001bc02c0] BOOTMEM
[ 0.000000] #41 [0001c00000 - 0001c1b000] BOOTMEM
[ 0.000000] #42 [0001d00000 - 0001d1b000] BOOTMEM
[ 0.000000] #43 [0080200000 - 008021b000] BOOTMEM
[ 0.000000] #44 [0080300000 - 008031b000] BOOTMEM
[ 0.000000] #45 [0001bc02c0 - 0001bc02d0] BOOTMEM
[ 0.000000] #46 [0001bc0300 - 0001bc0310] BOOTMEM
[ 0.000000] #47 [0001bc0340 - 0001bc0350] BOOTMEM
[ 0.000000] #48 [0001bc0380 - 0001bc03a0] BOOTMEM
[ 0.000000] #49 [0001bc03c0 - 0001bc0500] BOOTMEM
[ 0.000000] #50 [0001bc0500 - 0001bc0560] BOOTMEM
[ 0.000000] #51 [0001bc0580 - 0001bc05e0] BOOTMEM
[ 0.000000] #52 [0001bc2000 - 0001bca000] BOOTMEM
[ 0.000000] #53 [0020000000 - 0024000000] BOOTMEM
[ 0.000000] #54 [0004000000 - 0008000000] BOOTMEM
[ 0.000000] #55 [0001bca000 - 0001bea000] BOOTMEM
[ 0.000000] #56 [0001c1b000 - 0001c5b000] BOOTMEM
[ 0.000000] #57 [000000d000 - 0000015000] BOOTMEM
[ 0.000000] Memory: 3989044k/4718592k available (5525k kernel code, 524872k absent, 204676k reserved, 5367k data, 564k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 4
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:712
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty1] enabled, bootconsole disabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2599.982 MHz processor.
[ 0.020011] Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.96 BogoMIPS (lpj=25999820)
[ 0.030002] pid_max: default: 32768 minimum: 301
[ 0.035197] Security Framework initialized
[ 0.040261] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.050399] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.058566] Mount-cache hash table entries: 256
[ 0.060161] CPU: Physical Processor ID: 0
[ 0.064176] CPU: Processor Core ID: 0
[ 0.070002] mce: CPU supports 5 MCE banks
[ 0.074022] using C1E aware idle routine
[ 0.077950] Performance Events: AMD PMU driver.
[ 0.081501] ... version: 0
[ 0.085511] ... bit width: 48
[ 0.090001] ... generic registers: 4
[ 0.094016] ... value mask: 0000ffffffffffff
[ 0.100001] ... max period: 00007fffffffffff
[ 0.105469] ... fixed-purpose events: 0
[ 0.110001] ... event mask: 000000000000000f
[ 0.115336] Freeing SMP alternatives: 20k freed
[ 0.120012] ACPI: Core revision 20100702
[ 0.130878] Setting APIC routing to flat
[ 0.135231] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.241267] CPU0: Dual-Core AMD Opteron(tm) Processor 2218 stepping 02
[ 0.250000] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.250000] Booting Node 0, Processors #1
[ 0.410108] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.415953] Ok.
[ 0.417806] Booting Node 1, Processors #2
[ 0.580082] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.585920] #3 Ok.
[ 0.740132] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.745720] Brought up 4 CPUs
[ 0.748697] Total of 4 processors activated (20800.19 BogoMIPS).
[ 0.750392] NET: Registered protocol family 16
[ 0.760023] TOM: 00000000e0000000 aka 3584M
[ 0.764207] TOM2: 0000000120000000 aka 4608M
[ 0.768495] ACPI: bus type pci registered
[ 0.770026] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.780002] PCI: not using MMCONFIG
[ 0.783499] PCI: Using configuration type 1 for base access
[ 0.800066] bio: create slab <bio-0> at 0
[ 0.804043] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.813216] ACPI: Interpreter enabled
[ 0.820001] ACPI: (supports S0 S5)
[ 0.823476] ACPI: Using IOAPIC for interrupt routing
[ 0.828474] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.844447] [Firmware Bug]: PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] not reserved in ACPI motherboard resources
[ 0.850001] PCI: not using MMCONFIG
[ 0.860438] ACPI Warning: Incorrect checksum in table [OEMB] - 0xEC, should be 0xE7 (20100702/tbutils-314)
[ 0.872254] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.880227] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.891149] pci 0000:00:06.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.900166] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.910007] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[ 0.930008] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 0.950007] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[ 0.955365] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.960005] pci 0000:00:0f.0: PCI bridge to [bus 01-01]
[ 0.970724] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[ 0.981976] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.991713] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10
[ 0.998216] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 1.002878] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10
[ 1.011982] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[ 1.018501] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 1.022874] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *5
[ 1.031907] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[ 1.038425] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled.
[ 1.042890] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 1.051988] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[ 1.060312] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[ 1.066815] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 1.071974] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
[ 1.080108] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 1.086540] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
[ 1.091983] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 1.100315] ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *10
[ 1.106750] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.110002] vgaarb: loaded
[ 1.112789] SCSI subsystem initialized
[ 1.120017] usbcore: registered new interface driver usbfs
[ 1.125498] usbcore: registered new interface driver hub
[ 1.130012] usbcore: registered new device driver usb
[ 1.135240] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 1.140001] PCI: Using ACPI for IRQ routing
[ 1.144265] NetLabel: Initializing
[ 1.150002] NetLabel: domain hash size = 128
[ 1.154366] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.160011] NetLabel: unlabeled traffic allowed by default
[ 1.165589] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 1.170005] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 1.175111] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 1.210030] Switching to clocksource hpet
[ 1.214052] FS-Cache: Loaded
[ 1.214054] CacheFiles: Loaded
[ 1.216188] pnp: PnP ACPI init
[ 1.219260] ACPI: bus type pnp registered
[ 1.227219] pnp: PnP ACPI: found 14 devices
[ 1.231424] ACPI: ACPI bus type pnp unregistered
[ 1.236057] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 1.242008] system 00:06: [io 0x07b0-0x07df] has been reserved
[ 1.247926] system 00:06: [io 0x0800-0x080f] has been reserved
[ 1.253879] system 00:06: [io 0x0bb0-0x0bdf] has been reserved
[ 1.259979] system 00:06: [io 0x2000-0x207f] has been reserved
[ 1.265936] system 00:06: [io 0x2080-0x20ff] has been reserved
[ 1.271872] system 00:06: [io 0x2400-0x247f] has been reserved
[ 1.277790] system 00:06: [io 0x2480-0x24ff] has been reserved
[ 1.283746] system 00:06: [io 0x2800-0x287f] has been reserved
[ 1.289664] system 00:06: [io 0x2880-0x28ff] has been reserved
[ 1.295618] system 00:06: [io 0x2c00-0x2c7f] has been reserved
[ 1.301556] system 00:06: [io 0x2c80-0x2cff] has been reserved
[ 1.307475] system 00:06: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 1.314727] system 00:06: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 1.322095] system 00:06: [mem 0x000de000-0x000dffff window] has been reserved
[ 1.329321] system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
[ 1.335971] system 00:06: [mem 0xefa80000-0xefabffff] has been reserved
[ 1.342601] system 00:06: [mem 0xffb00000-0xffbfffff] has been reserved
[ 1.349211] system 00:06: [mem 0xfff00000-0xffffffff] has been reserved
[ 1.355864] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.362845] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.369458] system 00:0c: [io 0x0290-0x0297] has been reserved
[ 1.375414] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.382398] system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
[ 1.389190] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.396187] system 00:0d: [mem 0x00100000-0xdfffffff] could not be reserved
[ 1.403164] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
[ 1.419451] pci 0000:00:06.0: PCI bridge to [bus 05-05]
[ 1.424709] pci 0000:00:06.0: bridge window [io disabled]
[ 1.430385] pci 0000:00:06.0: bridge window [mem 0xeff00000-0xefffffff]
[ 1.437168] pci 0000:00:06.0: bridge window [mem 0xeef00000-0xeeffffff pref]
[ 1.444427] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[ 1.449653] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff]
[ 1.455902] pci 0000:00:0b.0: bridge window [mem 0xefe00000-0xefefffff]
[ 1.462713] pci 0000:00:0b.0: bridge window [mem pref disabled]
[ 1.468804] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 1.474065] pci 0000:00:0c.0: bridge window [io disabled]
[ 1.479725] pci 0000:00:0c.0: bridge window [mem 0xefd00000-0xefdfffff]
[ 1.486546] pci 0000:00:0c.0: bridge window [mem pref disabled]
[ 1.492657] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[ 1.497882] pci 0000:00:0d.0: bridge window [io disabled]
[ 1.503575] pci 0000:00:0d.0: bridge window [mem 0xefc00000-0xefcfffff]
[ 1.510380] Clocksource tsc unstable (delta = 631633489 ns)
[ 1.516068] pci 0000:00:0d.0: bridge window [mem pref disabled]
[ 1.522195] pci 0000:00:0f.0: PCI bridge to [bus 01-01]
[ 1.527427] pci 0000:00:0f.0: bridge window [io 0xd000-0xdfff]
[ 1.533555] pci 0000:00:0f.0: bridge window [mem 0xefb00000-0xefbfffff]
[ 1.540368] pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xe7ffffff 64bit pref]
[ 1.548211] NET: Registered protocol family 2
[ 1.552764] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.561709] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.573951] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.581402] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.588019] TCP reno registered
[ 1.591214] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.597278] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.603887] NET: Registered protocol family 1
[ 1.608385] RPC: Registered udp transport module.
[ 1.613115] RPC: Registered tcp transport module.
[ 1.617830] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.646008] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.651559] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.657086] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.662642] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.668175] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.673742] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.679284] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.685475] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.691043] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.696623] Unpacking initramfs...
[ 1.722701] Freeing initrd memory: 1184k freed
[ 1.727901] PCI-DMA: Disabling AGP.
[ 1.731664] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 1.737235] PCI-DMA: using GART IOMMU.
[ 1.741019] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.754121] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.764006] VFS: Disk quotas dquot_6.5.2
[ 1.768036] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.774611] FS-Cache: Netfs 'nfs' registered for caching
[ 1.780155] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 1.789679] SGI XFS Quota Management subsystem
[ 1.794183] msgmni has been set to 7922
[ 1.798769] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 1.806191] io scheduler noop registered
[ 1.810208] io scheduler cfq registered (default)
[ 1.815342] pcieport 0000:00:0b.0: ACPI _OSC control granted for 0x1d
[ 1.821942] pcieport 0000:00:0c.0: ACPI _OSC control granted for 0x1d
[ 1.828516] pcieport 0000:00:0d.0: ACPI _OSC control granted for 0x1d
[ 1.835096] pcieport 0000:00:0f.0: ACPI _OSC control granted for 0x1d
[ 1.842053] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.850438] ACPI: Power Button [PWRB]
[ 1.854203] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.861623] ACPI: Power Button [PWRF]
[ 1.865968] Real Time Clock Driver v1.12b
[ 1.870232] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 1.879180] Hangcheck: Using getrawmonotonic().
[ 1.883806] [drm] Initialized drm 1.1.0 20060810
[ 1.888487] [drm] radeon kernel modesetting enabled.
[ 1.893721] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[ 1.899478] radeon 0000:01:00.0: PCI INT A -> Link[LNEB] -> GSI 19 (level, low) -> IRQ 19
[ 1.909871] [drm] initializing kernel modesetting (RV380 0x1002:0x5B60).
[ 1.916673] [drm] register mmio base: 0xEFBF0000
[ 1.921322] [drm] register mmio size: 65536
[ 1.926142] [drm] Generation 2 PCI interface, using max accessible memory
[ 1.932959] radeon 0000:01:00.0: VRAM: 128M 0xE0000000 - 0xE7FFFFFF (128M used)
[ 1.940288] radeon 0000:01:00.0: GTT: 512M 0xC0000000 - 0xDFFFFFFF
[ 1.946513] radeon 0000:01:00.0: radeon: using MSI.
[ 1.951443] [drm] radeon: irq initialized.
[ 1.956254] [drm] Detected VRAM RAM=128M, BAR=128M
[ 1.961100] [drm] RAM width 64bits DDR
[ 1.964935] [TTM] Zone kernel: Available graphics memory: 2028100 kiB.
[ 1.971566] [TTM] Initializing pool allocator.
[ 1.976038] [drm] radeon: 128M of VRAM memory ready
[ 1.980945] [drm] radeon: 512M of GTT memory ready.
[ 1.985841] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.993082] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 1.999658] [drm] PCIE GART of 512M enabled (table at 0xE0040000).
[ 2.005989] [drm] Loading R300 Microcode
[ 2.010098] [drm] radeon: ring at 0x00000000C0000000
[ 2.015083] [drm] ring test succeeded in 1 usecs
[ 2.019782] [drm] radeon: ib pool ready.
[ 2.023812] [drm] ib test succeeded in 0 usecs
[ 2.028621] [drm] Default TV standard: NTSC
[ 2.032823] [drm] 27.000000000 MHz TV ref clk
[ 2.037185] [drm] DFP table revision: 4
[ 2.041146] [drm] Default TV standard: NTSC
[ 2.045330] [drm] 27.000000000 MHz TV ref clk
[ 2.049804] [drm] Radeon Display Connectors
[ 2.054004] [drm] Connector 0:
[ 2.057068] [drm] VGA
[ 2.059526] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 2.065556] [drm] Encoders:
[ 2.068536] [drm] CRT1: INTERNAL_DAC1
[ 2.072568] [drm] Connector 1:
[ 2.075632] [drm] DVI-I
[ 2.078261] [drm] HPD1
[ 2.080826] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 2.086832] [drm] Encoders:
[ 2.089807] [drm] CRT2: INTERNAL_DAC2
[ 2.093853] [drm] DFP1: INTERNAL_TMDS1
[ 2.097955] [drm] Connector 2:
[ 2.101037] [drm] S-video
[ 2.103843] [drm] Encoders:
[ 2.106818] [drm] TV1: INTERNAL_DAC2
[ 2.242976] [drm] fb mappable at 0xE00C0000
[ 2.247162] [drm] vram apper at 0xE0000000
[ 2.251290] [drm] size 5242880
[ 2.254357] [drm] fb depth is 24
[ 2.257592] [drm] pitch is 5120
[ 2.261107] fbcon: radeondrmfb (fb0) is primary device
[ 2.381151] Console: switching to colour frame buffer device 160x64
[ 2.393850] fb0: radeondrmfb frame buffer device
[ 2.398488] drm: registered panic notifier
[ 2.402632] [drm] Initialized radeon 2.6.0 20080528 for 0000:01:00.0 on minor 0
[ 2.410120] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 2.437083] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.463858] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.469955] sata_sil24 0000:04:00.0: PCI INT A -> Link[LNEB] -> GSI 19 (level, low) -> IRQ 19
[ 2.478822] scsi0 : sata_sil24
[ 2.482089] scsi1 : sata_sil24
[ 2.485287] ata1: SATA max UDMA/100 host m128@0xefeffc00 port 0xefef8000 irq 19
[ 2.492650] ata2: SATA max UDMA/100 host m128@0xefeffc00 port 0xefefa000 irq 19
[ 2.500476] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 2.506257] sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 2.514594] sata_nv 0000:00:05.0: Using SWNCQ mode
[ 2.519577] scsi2 : sata_nv
[ 2.522540] scsi3 : sata_nv
[ 2.525518] ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 23
[ 2.532706] ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 23
[ 2.540126] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
[ 2.545906] sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
[ 2.554244] sata_nv 0000:00:05.1: Using SWNCQ mode
[ 2.559214] scsi4 : sata_nv
[ 2.562195] scsi5 : sata_nv
[ 2.565156] ata5: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xb800 irq 22
[ 2.572340] ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb808 irq 22
[ 2.579742] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 21
[ 2.585543] sata_nv 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 21 (level, low) -> IRQ 21
[ 2.593867] sata_nv 0000:00:05.2: Using SWNCQ mode
[ 2.598857] scsi6 : sata_nv
[ 2.601843] scsi7 : sata_nv
[ 2.604817] ata7: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xac00 irq 21
[ 2.611999] ata8: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xac08 irq 21
[ 2.619457] scsi8 : pata_amd
[ 2.622499] scsi9 : pata_amd
[ 2.627895] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 2.636448] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 2.645289] tg3.c:v3.113 (August 2, 2010)
[ 2.651160] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18
[ 2.658412] tg3 0000:03:00.0: PCI INT A -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18
[ 2.705556] tg3 0000:03:00.0: eth0: Tigon3 [partno(BCM95700A6) rev b002] (PCI Express) MAC address 00:17:31:f9:cc:c5
[ 2.717828] tg3 0000:03:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 2.728773] tg3 0000:03:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.738767] tg3 0000:03:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.747648] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 17
[ 2.755492] tg3 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 17 (level, low) -> IRQ 17
[ 2.804492] tg3 0000:02:00.0: eth1: Tigon3 [partno(BCM95700A6) rev b002] (PCI Express) MAC address 00:18:f3:44:df:ea
[ 2.817081] tg3 0000:02:00.0: eth1: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 2.828016] tg3 0000:02:00.0: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.838052] tg3 0000:02:00.0: eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.847417] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16
[ 2.855170] ohci1394 0000:05:08.0: PCI INT A -> Link[LNKA] -> GSI 16 (level, low) -> IRQ 16
[ 2.900036] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.920053] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[effff800-efffffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 2.934544] eth1394: eth2: IPv4 over IEEE 1394 (fw-host0)
[ 2.942300] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.942441] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.942656] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
[ 2.942669] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
[ 2.942683] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 2.942691] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 2.942714] ehci_hcd 0000:00:02.1: debug port 1
[ 2.942744] ehci_hcd 0000:00:02.1: irq 20, io mem 0xefaebc00
[ 2.970014] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 2.970032] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.970034] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.970036] usb usb1: Product: EHCI Host Controller
[ 2.970037] usb usb1: Manufacturer: Linux 2.6.36-rc5 ehci_hcd
[ 2.970039] usb usb1: SerialNumber: 0000:00:02.1
[ 2.970203] hub 1-0:1.0: USB hub found
[ 2.970207] hub 1-0:1.0: 10 ports detected
[ 2.970326] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.970542] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 2.970545] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[ 2.970560] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 2.970566] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 2.970578] ohci_hcd 0000:00:02.0: irq 23, io mem 0xefaf8000
[ 3.042026] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.042028] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.042030] usb usb2: Product: OHCI Host Controller
[ 3.042032] usb usb2: Manufacturer: Linux 2.6.36-rc5 ohci_hcd
[ 3.042033] usb usb2: SerialNumber: 0000:00:02.0
[ 3.042159] hub 2-0:1.0: USB hub found
[ 3.042164] hub 2-0:1.0: 10 ports detected
[ 3.042271] Initializing USB Mass Storage driver...
[ 3.042338] usbcore: registered new interface driver usb-storage
[ 3.042340] USB Mass Storage support registered.
[ 3.042404] usbcore: registered new interface driver libusual
[ 3.042456] usbcore: registered new interface driver ums-alauda
[ 3.042511] usbcore: registered new interface driver ums-cypress
[ 3.042563] usbcore: registered new interface driver ums-datafab
[ 3.042618] usbcore: registered new interface driver ums-freecom
[ 3.042669] usbcore: registered new interface driver ums-isd200
[ 3.042721] usbcore: registered new interface driver ums-jumpshot
[ 3.042777] usbcore: registered new interface driver ums-karma
[ 3.042829] usbcore: registered new interface driver ums-sddr09
[ 3.042880] usbcore: registered new interface driver ums-sddr55
[ 3.042934] usbcore: registered new interface driver ums-usbat
[ 3.043059] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 3.045588] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.045595] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.045855] mice: PS/2 mouse device common for all mice
[ 3.046185] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 3.046284] I2O subsystem v1.325
[ 3.046285] i2o: max drivers = 8
[ 3.046470] i2c /dev entries driver
[ 3.046933] i2c i2c-4: nForce2 SMBus adapter at 0x2a00
[ 3.047038] i2c i2c-5: nForce2 SMBus adapter at 0x2a80
[ 3.047196] lirc_dev: IR Remote Control driver registered, major 253
[ 3.047198] IR NEC protocol handler initialized
[ 3.047199] IR RC5(x) protocol handler initialized
[ 3.047200] IR RC6 protocol handler initialized
[ 3.047202] IR JVC protocol handler initialized
[ 3.047203] IR Sony protocol handler initialized
[ 3.047204] IR LIRC bridge handler initialized
[ 3.047205] Linux video capture interface: v2.00
[ 3.047570] bttv: driver version 0.9.18 loaded
[ 3.047572] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 3.047666] bttv: Bt8xx card found (0).
[ 3.047857] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
[ 3.047860] bttv 0000:05:06.0: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19
[ 3.047867] bttv0: Bt878 (rev 17) at 0000:05:06.0, irq: 19, latency: 64, mmio: 0xeefff000
[ 3.047881] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
[ 3.047883] bttv0: using: Hauppauge (bt878) [card=10,autodetected]
[ 3.050412] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
[ 3.066621] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.084419] tveeprom 6-0050: Hauppauge model 61344, rev D421, serial# 3902813
[ 3.084421] tveeprom 6-0050: tuner model is Philips FM1216 (idx 21, type 5)
[ 3.084424] tveeprom 6-0050: TV standards PAL(B/G) (eeprom 0x04)
[ 3.084426] tveeprom 6-0050: audio processor is MSP3415 (idx 6)
[ 3.084427] tveeprom 6-0050: has radio
[ 3.084429] bttv0: Hauppauge eeprom indicates model#61344
[ 3.084430] bttv0: tuner type=5
[ 3.097785] msp3400 6-0040: MSP3415D-B3 found @ 0x80 (bt878 #0 [sw])
[ 3.097787] msp3400 6-0040: msp3400 supports nicam, mode is autodetect
[ 3.109810] tuner 6-0061: chip found @ 0xc2 (bt878 #0 [sw])
[ 3.110103] tuner-simple 6-0061: creating new instance
[ 3.110106] tuner-simple 6-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[ 3.110811] bttv0: registered device video0
[ 3.110866] bttv0: registered device vbi0
[ 3.110919] bttv0: registered device radio0
[ 3.112429] bttv0: PLL: 28636363 => 35468950 .
[ 3.603026] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.610075] . ok
[ 3.635040] Registered IR keymap rc-rc5-tv
[ 3.641059] input: i2c IR (Hauppauge) as /devices/virtual/rc/rc0/input4
[ 3.649554] rc0: i2c IR (Hauppauge) as /devices/virtual/rc/rc0
[ 3.656914] ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-6/6-0018/ir0 [bt878 #0 [sw]]
[ 3.675611] ata3.00: ATA-7: MAXTOR STM3320820AS, 3.AAE, max UDMA/133
[ 3.683771] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.758899] ata3.00: configured for UDMA/133
[ 4.070019] usb 2-6: new low speed USB device using ohci_hcd and address 2
[ 4.258036] usb 2-6: New USB device found, idVendor=062a, idProduct=0000
[ 4.266620] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.500081] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 4.510043] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
[ 4.520230] md: raid1 personality registered for level 1
[ 4.527821] device-mapper: uevent: version 1.0.3
[ 4.534492] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@xxxxxxxxxx
[ 4.544918] EDAC MC: Ver: 2.1.0 Sep 21 2010
[ 4.551330] EDAC amd64_edac: Ver: 3.3.0 Sep 21 2010
[ 4.558278] EDAC amd64: ECC is enabled by BIOS.
[ 4.564784] EDAC amd64: ECC is enabled by BIOS.
[ 4.571822] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2
[ 4.581340] EDAC MC1: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:19.2
[ 4.591090] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 4.604470] cpuidle: using governor ladder
[ 4.610553] cpuidle: using governor menu
[ 4.618253] usbcore: registered new interface driver hiddev
[ 4.631332] input: HID 062a:0000 as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/input/input5
[ 4.642674] generic-usb 0003:062A:0000.0001: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:02.0-6/input0
[ 4.656445] usbcore: registered new interface driver usbhid
[ 4.664405] usbhid: USB HID core driver
[ 4.670639] Bt87x 0000:05:06.1: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19
[ 4.681301] bt87x0: Using board 1, analog, digital (rate 32000 Hz)
[ 4.690294] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 4.698571] HDA Intel 0000:00:06.1: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 4.709150] hda_intel: Disable MSI for Nvidia chipset
[ 4.730054] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 4.744574] ata1.00: ATA-7: SAMSUNG HD642JJ, 1AA01113, max UDMA7
[ 4.752850] ata1.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 4.768610] ata1.00: configured for UDMA/100
[ 4.775591] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD642JJ 1AA0 PQ: 0 ANSI: 5
[ 4.786182] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 4.796285] sd 0:0:0:0: [sda] Write Protect is off
[ 4.803438] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.834245] sda: sda1 sda2 sda3
[ 4.839996] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.260528] ALSA device list:
[ 6.265987] #0: HDA NVidia at 0xefafc000 irq 22
[ 6.272887] #1: Brooktree Bt878 at 0xeeffe000, irq 19
[ 6.280987] Initializing XFRM netlink socket
[ 6.287498] NET: Registered protocol family 17
[ 6.294482] NET: Registered protocol family 15
[ 6.301255] Registering the dns_resolver key type
[ 6.308132] powernow-k8: Found 2 Dual-Core AMD Opteron(tm) Processor 2218 (4 cpu cores) (version 2.20.00)
[ 6.320221] powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8
[ 6.328449] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa
[ 6.336387] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc
[ 6.344569] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe
[ 6.352350] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10
[ 6.360550] powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12
[ 6.368862] powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8
[ 6.377476] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa
[ 6.385197] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc
[ 6.393015] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe
[ 6.400598] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10
[ 6.408116] powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12
[ 7.000051] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 7.016333] ata2.00: ATA-7: SAMSUNG HD642JJ, 1AA01113, max UDMA7
[ 7.026243] ata2.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.043365] ata2.00: configured for UDMA/100
[ 7.051789] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD642JJ 1AA0 PQ: 0 ANSI: 5
[ 7.064244] sd 1:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 7.064583] scsi 2:0:0:0: Direct-Access ATA MAXTOR STM332082 3.AA PQ: 0 ANSI: 5
[ 7.065024] sd 2:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 7.065129] sd 2:0:0:0: [sdc] Write Protect is off
[ 7.065183] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.080725] sdc: sdc1 sdc2
[ 7.127963] sd 1:0:0:0: [sdb] Write Protect is off
[ 7.128309] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 7.145445] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.177685] sdb: sdb1 sdb2 sdb3
[ 7.185858] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 7.400022] ata4: SATA link down (SStatus 0 SControl 300)
[ 7.730028] ata6: SATA link down (SStatus 0 SControl 300)
[ 8.060027] ata8: SATA link down (SStatus 0 SControl 300)
[ 8.069502] Freeing unused kernel memory: 564k freed
[ 8.078937] Write protecting the kernel read-only data: 10240k
[ 8.088937] Freeing unused kernel memory: 596k freed
[ 8.098543] Freeing unused kernel memory: 1728k freed
Sep 25 07:44:57 treogen syslog-ng[2716]: syslog-ng starting up; version='3.1.2'
Sep 25 07:45:02 treogen mdadm[2864]: NewArray event detected on md device /dev/md2
Sep 25 07:45:02 treogen mdadm[2864]: NewArray event detected on md device /dev/md3
Sep 25 07:45:09 treogen ntpdate[2875]: step time server 192.168.3.2 offset -1.399604 sec
Sep 25 07:45:09 treogen rpcbind: cannot bind 127.0.0.1 on udp: Address already in use
Sep 25 07:45:09 treogen rpcbind: cannot create socket for udp6
Sep 25 07:45:09 treogen rpcbind: cannot create socket for tcp6
Sep 25 07:45:10 treogen kdm: :0[2637]: pam_unix(kde:session): session opened for user tk13 by (uid=0)
Sep 25 07:45:10 treogen sm-notify[2944]: Version 1.2.2 starting
Sep 25 07:45:12 treogen postfix/postfix-script[3069]: starting the Postfix mail system
Sep 25 07:45:12 treogen postfix/master[3070]: daemon started -- version 2.6.7, configuration /etc/postfix
Sep 25 07:45:12 treogen smartd[3087]: smartd 5.39.1 2010-01-28 r3054 [x86_64-pc-linux-gnu] (local build)
Sep 25 07:45:12 treogen Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
Sep 25 07:45:12 treogen smartd[3087]: Opened configuration file /etc/smartd.conf
Sep 25 07:45:12 treogen smartd[3087]: Drive: /dev/sda, implied '-a' Directive on line 24 of file /etc/smartd.conf
Sep 25 07:45:12 treogen smartd[3087]: Drive: /dev/sdb, implied '-a' Directive on line 25 of file /etc/smartd.conf
Sep 25 07:45:12 treogen smartd[3087]: Drive: /dev/sdc, implied '-a' Directive on line 26 of file /etc/smartd.conf
Sep 25 07:45:12 treogen smartd[3087]: Configuration file /etc/smartd.conf parsed.
Sep 25 07:45:12 treogen smartd[3087]: Device: /dev/sda, opened
Sep 25 07:45:12 treogen smartd[3087]: Device: /dev/sda, found in smartd database.
Sep 25 07:45:13 treogen smartd[3087]: Device: /dev/sda, is SMART capable. Adding to "monitor" list.
Sep 25 07:45:13 treogen smartd[3087]: Device: /dev/sdb, opened
Sep 25 07:45:13 treogen smartd[3087]: Device: /dev/sdb, found in smartd database.
Sep 25 07:45:13 treogen smartd[3087]: Device: /dev/sdb, is SMART capable. Adding to "monitor" list.
Sep 25 07:45:13 treogen smartd[3087]: Device: /dev/sdc, opened
Sep 25 07:45:13 treogen smartd[3087]: Device: /dev/sdc, found in smartd database.
Sep 25 07:45:13 treogen smartd[3087]: Device: /dev/sdc, is SMART capable. Adding to "monitor" list.
Sep 25 07:45:13 treogen smartd[3087]: Monitoring 3 ATA and 0 SCSI devices
Sep 25 07:45:13 treogen smartd[3100]: smartd has fork()ed into background mode. New PID=3100.
Sep 25 07:45:13 treogen smartd[3100]: file /var/run/smartd.pid written containing PID 3100
Sep 25 07:45:15 treogen cron[3128]: (CRON) STARTUP (V5.0)
Sep 25 07:46:08 treogen polkitd[3277]: started daemon version 0.96 using authority implementation `local' version `0.96'
Sep 25 07:46:08 treogen polkitd(authority=local): Registered Authentication Agent for session /org/freedesktop/ConsoleKit/Session1 (system bus name :1.11 [/usr/lib64/kde4/libexec/polkit-kde-authentication-agent-1 -session 10dbd7d36f000127743216200000067470009_1285365114_26164], object path /org/kde/PolicyKit1/AuthenticationAgent, locale en_GB.utf8)
Sep 25 07:46:14 treogen pulseaudio[3342]: pid.c: Daemon already running.
Sep 25 07:46:14 treogen pulseaudio[3343]: pid.c: Daemon already running.
Sep 25 07:46:14 treogen pulseaudio[3345]: pid.c: Daemon already running.
Sep 25 07:46:32 treogen su[3385]: Successful su for root by tk13
Sep 25 07:46:32 treogen su[3385]: + /dev/pts/3 tk13:root
Sep 25 07:46:32 treogen su[3385]: pam_unix(su:session): session opened for user root by tk13(uid=1000)
Sep 25 07:50:01 treogen cron[3444]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
[ 1033.312407] SysRq : Show Blocked State
[ 1035.876602] SysRq : Changing Loglevel
[ 1035.880405] Loglevel set to 6
[ 1081.760056] INFO: task X:2585 blocked for more than 120 seconds.
[ 1081.766302] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1081.774410] ffff88011f2b9c70 0000000000003082 ffff880100000001 ffff880100000003
[ 1081.782146] ffff8800078dd550 0000000000012780 ffff88011e031fd8 0000000000012780
[ 1081.789850] ffff88011e031fd8 ffff88011f2b9ed0 ffff88011e031fd8 ffff88011f2b9ec8
[ 1081.797606] Call Trace:
[ 1081.800166] [<ffffffff810801c0>] ? sync_page+0x0/0x50
[ 1081.805509] [<ffffffff8156078d>] ? io_schedule+0x3d/0x60
[ 1081.811129] [<ffffffff810801fd>] ? sync_page+0x3d/0x50
[ 1081.816556] [<ffffffff81560b7a>] ? __wait_on_bit_lock+0x4a/0xa0
[ 1081.822802] [<ffffffff8108019e>] ? __lock_page+0x5e/0x70
[ 1081.828420] [<ffffffff81052ea0>] ? wake_bit_function+0x0/0x40
[ 1081.834488] [<ffffffff81099ce7>] ? handle_mm_fault+0xa47/0xa60
[ 1081.840641] [<ffffffff813d4b0c>] ? evdev_read+0xec/0x270
[ 1081.846258] [<ffffffff810cd91f>] ? do_vfs_ioctl+0x9f/0x530
[ 1081.852077] [<ffffffff8102404d>] ? do_page_fault+0x10d/0x320
[ 1081.858052] [<ffffffff8156265f>] ? page_fault+0x1f/0x30
[ 1081.863591] INFO: task hald-addon-inpu:2805 blocked for more than 120 seconds.
[ 1081.871107] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1081.879245] ffff8800071cf1c0 0000000000000082 ffff880100000001 ffff880000000003
[ 1081.887012] ffff88007f71c440 0000000000012780 ffff88000417bfd8 0000000000012780
[ 1081.894777] ffff88000417bfd8 ffff8800071cf420 ffff88000417bfd8 ffff8800071cf418
[ 1081.902517] Call Trace:
[ 1081.905078] [<ffffffff810801c0>] ? sync_page+0x0/0x50
[ 1081.910443] [<ffffffff8156078d>] ? io_schedule+0x3d/0x60
[ 1081.916048] [<ffffffff810801fd>] ? sync_page+0x3d/0x50
[ 1081.921492] [<ffffffff81560b7a>] ? __wait_on_bit_lock+0x4a/0xa0
[ 1081.927731] [<ffffffff8108019e>] ? __lock_page+0x5e/0x70
[ 1081.933346] [<ffffffff81052ea0>] ? wake_bit_function+0x0/0x40
[ 1081.939414] [<ffffffff81099ce7>] ? handle_mm_fault+0xa47/0xa60
[ 1081.945575] [<ffffffff815602ac>] ? schedule+0x24c/0x6f0
[ 1081.951277] [<ffffffff8102404d>] ? do_page_fault+0x10d/0x320
[ 1081.957103] [<ffffffff8156265f>] ? page_fault+0x1f/0x30
[ 1081.962494] [<ffffffff810cf29e>] ? do_sys_poll+0x2be/0x4b0
[ 1081.968126] [<ffffffff810cf285>] ? do_sys_poll+0x2a5/0x4b0
[ 1081.973787] [<ffffffff810cecf0>] ? __pollwait+0x0/0x110
[ 1081.979167] [<ffffffff810cee00>] ? pollwake+0x0/0x60
[ 1081.984298] [<ffffffff810cee00>] ? pollwake+0x0/0x60
[ 1081.989421] [<ffffffff810cee00>] ? pollwake+0x0/0x60
[ 1081.994541] [<ffffffff810cee00>] ? pollwake+0x0/0x60
[ 1081.999665] [<ffffffff810cee00>] ? pollwake+0x0/0x60
[ 1082.004779] [<ffffffff810c22ed>] ? chrdev_open+0xdd/0x180
[ 1082.010346] [<ffffffff81080e68>] ? find_get_page+0x18/0xa0
[ 1082.015992] [<ffffffff810819e9>] ? filemap_fault+0x99/0x3f0
[ 1082.021733] [<ffffffff814a3efa>] ? verify_iovec+0x6a/0xc0
[ 1082.027277] [<ffffffff810973ea>] ? __do_fault+0x3da/0x4b0
[ 1082.032848] [<ffffffff8156244e>] ? common_interrupt+0xe/0x13
[ 1082.038674] [<ffffffff813d4b63>] ? evdev_read+0x143/0x270
[ 1082.044236] [<ffffffff813d28e2>] ? input_event_to_user+0x62/0x70
[ 1082.050416] [<ffffffff810cf691>] ? sys_poll+0x71/0x100
[ 1082.055712] [<ffffffff8156265f>] ? page_fault+0x1f/0x30
[ 1082.061165] [<ffffffff8100246b>] ? system_call_fastpath+0x16/0x1b
[ 1082.067654] INFO: task plasma-desktop:3169 blocked for more than 120 seconds.
[ 1082.075166] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1082.083425] ffff88011ef860b0 0000000000000086 000000011ef860b0 ffff880114faff48
[ 1082.091234] ffff8800071cf1c0 0000000000012780 ffff880114faffd8 0000000000012780
[ 1082.099051] ffff880114faffd8 ffff88011ef86310 ffff880114faffd8 ffff88011ef86308
[ 1082.106887] Call Trace:
[ 1082.109467] [<ffffffff815612c1>] ? __mutex_lock_slowpath+0xe1/0x160
[ 1082.116165] [<ffffffff810d1e57>] ? __d_lookup+0x97/0x120
[ 1082.121849] [<ffffffff81560d8a>] ? mutex_lock+0x1a/0x40
[ 1082.127439] [<ffffffff810c9dbf>] ? do_lookup+0x10f/0x190
[ 1082.133099] [<ffffffff810c7e24>] ? acl_permission_check+0x54/0xb0
[ 1082.139598] [<ffffffff810ca8d9>] ? link_path_walk+0x4c9/0x9a0
[ 1082.145733] [<ffffffff810d65f4>] ? mnt_want_write+0x34/0x70
[ 1082.151678] [<ffffffff810caecf>] ? path_walk+0x5f/0xe0
[ 1082.157174] [<ffffffff810caf9b>] ? do_path_lookup+0x4b/0x50
[ 1082.163110] [<ffffffff810cbc35>] ? user_path_at+0x55/0xb0
[ 1082.168884] [<ffffffff8102e860>] ? __dequeue_entity+0x40/0x50
[ 1082.175022] [<ffffffff8107bcf4>] ? perf_event_task_sched_out+0x44/0x260
[ 1082.182056] [<ffffffff810c2e46>] ? vfs_fstatat+0x36/0x80
[ 1082.187742] [<ffffffff815602ac>] ? schedule+0x24c/0x6f0
[ 1082.193331] [<ffffffff810c2f8f>] ? sys_newstat+0x1f/0x50
[ 1082.199019] [<ffffffff81003035>] ? device_not_available+0x15/0x20
[ 1082.205535] [<ffffffff8100246b>] ? system_call_fastpath+0x16/0x1b
[ 1082.212034] INFO: task virtuoso-t:3362 blocked for more than 120 seconds.
[ 1082.219163] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1082.227412] ffff8800df8ac440 0000000000000082 ffff880100000001 ffff880000000003
[ 1082.235231] ffff8800ba6e60b0 0000000000012780 ffff8800de265fd8 0000000000012780
[ 1082.243065] ffff8800de265fd8 ffff8800df8ac6a0 ffff8800de265fd8 ffff8800df8ac698
[ 1082.250864] Call Trace:
[ 1082.253445] [<ffffffff810801c0>] ? sync_page+0x0/0x50
[ 1082.258844] [<ffffffff8156078d>] ? io_schedule+0x3d/0x60
[ 1082.264508] [<ffffffff810801fd>] ? sync_page+0x3d/0x50
[ 1082.269989] [<ffffffff81560b7a>] ? __wait_on_bit_lock+0x4a/0xa0
[ 1082.276296] [<ffffffff8108019e>] ? __lock_page+0x5e/0x70
[ 1082.281984] [<ffffffff81052ea0>] ? wake_bit_function+0x0/0x40
[ 1082.288119] [<ffffffff81099ce7>] ? handle_mm_fault+0xa47/0xa60
[ 1082.294333] [<ffffffff815602ac>] ? schedule+0x24c/0x6f0
[ 1082.299905] [<ffffffff8102404d>] ? do_page_fault+0x10d/0x320
[ 1082.305936] [<ffffffff8156265f>] ? page_fault+0x1f/0x30
[ 1082.311541] INFO: task cc1plus:12626 blocked for more than 120 seconds.
[ 1082.318473] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1082.326698] ffff88003ecf2d80 0000000000000082 ffff880100000001 ffff880000000003
[ 1082.334552] ffff88001f95b8e0 0000000000012780 ffff88000ec89fd8 0000000000012780
[ 1082.342384] ffff88000ec89fd8 ffff88003ecf2fe0 ffff88000ec89fd8 ffff88003ecf2fd8
[ 1082.350246] Call Trace:
[ 1082.352825] [<ffffffff810801c0>] ? sync_page+0x0/0x50
[ 1082.358213] [<ffffffff8156078d>] ? io_schedule+0x3d/0x60
[ 1082.363882] [<ffffffff810801fd>] ? sync_page+0x3d/0x50
[ 1082.369375] [<ffffffff81560b7a>] ? __wait_on_bit_lock+0x4a/0xa0
[ 1082.375701] [<ffffffff8108019e>] ? __lock_page+0x5e/0x70
[ 1082.381397] [<ffffffff81052ea0>] ? wake_bit_function+0x0/0x40
[ 1082.387526] [<ffffffff81099ce7>] ? handle_mm_fault+0xa47/0xa60
[ 1082.393765] [<ffffffff8102404d>] ? do_page_fault+0x10d/0x320
[ 1082.399786] [<ffffffff8156265f>] ? page_fault+0x1f/0x30
[ 1202.400046] INFO: task kworker/u:8:845 blocked for more than 120 seconds.
[ 1202.407128] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1202.415372] ffff88007ffa8b60 0000000000000046 ffff88007f74fe98 0000000000000000
[ 1202.423229] ffff8800071cf770 0000000000012780 ffff8800070e9fd8 0000000000012780
[ 1202.431054] ffff8800070e9fd8 ffff88007ffa8dc0 ffff8800070e9fd8 ffff88007ffa8db8
[ 1202.438898] Call Trace:
[ 1202.441495] [<ffffffff814361ed>] ? md_write_start+0x9d/0x190
[ 1202.447536] [<ffffffff81052e70>] ? autoremove_wake_function+0x0/0x30
[ 1202.454311] [<ffffffff810925ca>] ? zone_nr_free_pages+0x9a/0xb0
[ 1202.460639] [<ffffffff8142c423>] ? make_request+0x23/0x800
[ 1202.466496] [<ffffffff811d90ea>] ? blkcipher_walk_done+0x8a/0x230
[ 1202.472990] [<ffffffff811df4c4>] ? crypto_cbc_encrypt+0xe4/0x180
[ 1202.479327] [<ffffffff8102a150>] ? twofish_encrypt+0x0/0x10
[ 1202.485276] [<ffffffff81431ac3>] ? md_make_request+0xc3/0x220
[ 1202.491412] [<ffffffff811eafca>] ? generic_make_request+0x18a/0x330
[ 1202.498096] [<ffffffff814484fc>] ? crypt_convert+0x25c/0x310
[ 1202.504090] [<ffffffff81448881>] ? kcryptd_crypt+0x2d1/0x3f0
[ 1202.510031] [<ffffffff814485b0>] ? kcryptd_crypt+0x0/0x3f0
[ 1202.516081] [<ffffffff8104d2eb>] ? process_one_work+0xfb/0x370
[ 1202.522123] [<ffffffff8104ee4c>] ? worker_thread+0x16c/0x360
[ 1202.527935] [<ffffffff8104ece0>] ? worker_thread+0x0/0x360
[ 1202.533541] [<ffffffff8104ece0>] ? worker_thread+0x0/0x360
[ 1202.539131] [<ffffffff810529e6>] ? kthread+0x96/0xa0
[ 1202.544245] [<ffffffff81003194>] ? kernel_thread_helper+0x4/0x10
[ 1202.550363] [<ffffffff81052950>] ? kthread+0x0/0xa0
[ 1202.555346] [<ffffffff81003190>] ? kernel_thread_helper+0x0/0x10
[ 1202.561479] INFO: task X:2585 blocked for more than 120 seconds.
[ 1202.567503] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1202.575468] ffff88011f2b9c70 0000000000003082 ffff880100000001 ffff880100000003
[ 1202.583060] ffff8800078dd550 0000000000012780 ffff88011e031fd8 0000000000012780
[ 1202.590757] ffff88011e031fd8 ffff88011f2b9ed0 ffff88011e031fd8 ffff88011f2b9ec8
[ 1202.598538] Call Trace:
[ 1202.601059] [<ffffffff810801c0>] ? sync_page+0x0/0x50
[ 1202.606381] [<ffffffff8156078d>] ? io_schedule+0x3d/0x60
[ 1202.611854] [<ffffffff810801fd>] ? sync_page+0x3d/0x50
[ 1202.617210] [<ffffffff81560b7a>] ? __wait_on_bit_lock+0x4a/0xa0
[ 1202.623684] [<ffffffff8108019e>] ? __lock_page+0x5e/0x70
[ 1202.629300] [<ffffffff81052ea0>] ? wake_bit_function+0x0/0x40
[ 1202.635396] [<ffffffff81099ce7>] ? handle_mm_fault+0xa47/0xa60
[ 1202.641606] [<ffffffff813d4b0c>] ? evdev_read+0xec/0x270
[ 1202.647275] [<ffffffff810cd91f>] ? do_vfs_ioctl+0x9f/0x530
[ 1202.653125] [<ffffffff8102404d>] ? do_page_fault+0x10d/0x320
[ 1202.659105] [<ffffffff8156265f>] ? page_fault+0x1f/0x30
[ 1202.664690] INFO: task hald-addon-inpu:2805 blocked for more than 120 seconds.
[ 1202.672282] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1202.680507] ffff8800071cf1c0 0000000000000082 ffff880100000001 ffff880000000003
[ 1202.688289] ffff88007f71c440 0000000000012780 ffff88000417bfd8 0000000000012780
[ 1202.696100] ffff88000417bfd8 ffff8800071cf420 ffff88000417bfd8 ffff8800071cf418
[ 1202.703924] Call Trace:
[ 1202.706503] [<ffffffff810801c0>] ? sync_page+0x0/0x50
[ 1202.711901] [<ffffffff8156078d>] ? io_schedule+0x3d/0x60
[ 1202.717577] [<ffffffff810801fd>] ? sync_page+0x3d/0x50
[ 1202.723081] [<ffffffff81560b7a>] ? __wait_on_bit_lock+0x4a/0xa0
[ 1202.729381] [<ffffffff8108019e>] ? __lock_page+0x5e/0x70
[ 1202.735031] [<ffffffff81052ea0>] ? wake_bit_function+0x0/0x40
[ 1202.741116] [<ffffffff81099ce7>] ? handle_mm_fault+0xa47/0xa60
[ 1202.747340] [<ffffffff815602ac>] ? schedule+0x24c/0x6f0
[ 1202.752902] [<ffffffff8102404d>] ? do_page_fault+0x10d/0x320
[ 1202.758893] [<ffffffff8156265f>] ? page_fault+0x1f/0x30
[ 1202.764428] [<ffffffff810cf29e>] ? do_sys_poll+0x2be/0x4b0
[ 1202.770338] [<ffffffff810cf285>] ? do_sys_poll+0x2a5/0x4b0
[ 1202.776113] [<ffffffff810cecf0>] ? __pollwait+0x0/0x110
[ 1202.781591] [<ffffffff810cee00>] ? pollwake+0x0/0x60
[ 1202.786764] [<ffffffff810cee00>] ? pollwake+0x0/0x60
[ 1202.791973] [<ffffffff810cee00>] ? pollwake+0x0/0x60
[ 1202.797181] [<ffffffff810cee00>] ? pollwake+0x0/0x60
[ 1202.802468] [<ffffffff810cee00>] ? pollwake+0x0/0x60
[ 1202.807773] [<ffffffff810c22ed>] ? chrdev_open+0xdd/0x180
[ 1202.813545] [<ffffffff81080e68>] ? find_get_page+0x18/0xa0
[ 1202.819384] [<ffffffff810819e9>] ? filemap_fault+0x99/0x3f0
[ 1202.825326] [<ffffffff814a3efa>] ? verify_iovec+0x6a/0xc0
[ 1202.831095] [<ffffffff810973ea>] ? __do_fault+0x3da/0x4b0
[ 1202.836847] [<ffffffff8156244e>] ? common_interrupt+0xe/0x13
[ 1202.842865] [<ffffffff813d4b63>] ? evdev_read+0x143/0x270
[ 1202.848626] [<ffffffff813d28e2>] ? input_event_to_user+0x62/0x70
[ 1202.855032] [<ffffffff810cf691>] ? sys_poll+0x71/0x100
[ 1202.860499] [<ffffffff8156265f>] ? page_fault+0x1f/0x30
[ 1202.866005] [<ffffffff8100246b>] ? system_call_fastpath+0x16/0x1b
[ 1202.872424] INFO: task plasma-desktop:3169 blocked for more than 120 seconds.
[ 1202.879883] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1202.888118] ffff88011ef860b0 0000000000000086 000000011ef860b0 ffff880114faff48
[ 1202.895936] ffff8800071cf1c0 0000000000012780 ffff880114faffd8 0000000000012780
[ 1202.903777] ffff880114faffd8 ffff88011ef86310 ffff880114faffd8 ffff88011ef86308
[ 1202.911586] Call Trace:
[ 1202.914140] [<ffffffff815612c1>] ? __mutex_lock_slowpath+0xe1/0x160
[ 1202.920693] [<ffffffff810d1e57>] ? __d_lookup+0x97/0x120
[ 1202.926272] [<ffffffff81560d8a>] ? mutex_lock+0x1a/0x40
[ 1202.931783] [<ffffffff810c9dbf>] ? do_lookup+0x10f/0x190
[ 1202.937426] [<ffffffff810c7e24>] ? acl_permission_check+0x54/0xb0
[ 1202.943898] [<ffffffff810ca8d9>] ? link_path_walk+0x4c9/0x9a0
[ 1202.950028] [<ffffffff810d65f4>] ? mnt_want_write+0x34/0x70
[ 1202.955947] [<ffffffff810caecf>] ? path_walk+0x5f/0xe0
[ 1202.961416] [<ffffffff810caf9b>] ? do_path_lookup+0x4b/0x50
[ 1202.967325] [<ffffffff810cbc35>] ? user_path_at+0x55/0xb0
[ 1202.973020] [<ffffffff8102e860>] ? __dequeue_entity+0x40/0x50
[ 1202.979054] [<ffffffff8107bcf4>] ? perf_event_task_sched_out+0x44/0x260
[ 1202.985995] [<ffffffff810c2e46>] ? vfs_fstatat+0x36/0x80
[ 1202.991600] [<ffffffff815602ac>] ? schedule+0x24c/0x6f0
[ 1202.997157] [<ffffffff810c2f8f>] ? sys_newstat+0x1f/0x50
[ 1203.002784] [<ffffffff81003035>] ? device_not_available+0x15/0x20
[ 1203.009204] [<ffffffff8100246b>] ? system_call_fastpath+0x16/0x1b
[ 1203.015608] INFO: task virtuoso-t:3362 blocked for more than 120 seconds.
[ 1203.022633] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1203.030726] ffff8800df8ac440 0000000000000082 ffff880100000001 ffff880000000003
[ 1203.038449] ffff8800ba6e60b0 0000000000012780 ffff8800de265fd8 0000000000012780
[ 1203.046215] ffff8800de265fd8 ffff8800df8ac6a0 ffff8800de265fd8 ffff8800df8ac698
[ 1203.053988] Call Trace:
[ 1203.056532] [<ffffffff810801c0>] ? sync_page+0x0/0x50
[ 1203.061836] [<ffffffff8156078d>] ? io_schedule+0x3d/0x60
[ 1203.067390] [<ffffffff810801fd>] ? sync_page+0x3d/0x50
[ 1203.072775] [<ffffffff81560b7a>] ? __wait_on_bit_lock+0x4a/0xa0
[ 1203.078926] [<ffffffff8108019e>] ? __lock_page+0x5e/0x70
[ 1203.084552] [<ffffffff81052ea0>] ? wake_bit_function+0x0/0x40
[ 1203.090670] [<ffffffff81099ce7>] ? handle_mm_fault+0xa47/0xa60
[ 1203.096867] [<ffffffff815602ac>] ? schedule+0x24c/0x6f0
[ 1203.102439] [<ffffffff8102404d>] ? do_page_fault+0x10d/0x320
[ 1203.108462] [<ffffffff8156265f>] ? page_fault+0x1f/0x30
[ 1229.421480] SysRq : Emergency Sync
[ 1237.014575] SysRq : Emergency Sync
[ 1239.121784] SysRq : Emergency Remount R/O
[ 1243.234840] SysRq : Emergency Sync
[ 1246.327060] SysRq : Power Off