[PATCH] staging:ft1000: Remove unused function ft1000_hbchk()

From: Marek Belisko
Date: Fri Oct 15 2010 - 05:14:45 EST

Next message: Peter Zijlstra: "Re: [RFC][PATCH 7/7] perf: Optimize sw events"
Previous message: Jiri Kosina: "Re: [RFC v5]Update broken web addresses in arch directory."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Signed-off-by: Marek Belisko <marek.belisko@xxxxxxxxx>
---
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c | 148 +------------------------
1 files changed, 1 insertions(+), 147 deletions(-)

diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
index 3e1a6bf..915c95c 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
@@ -37,11 +37,9 @@

static int ft1000_reset(struct net_device *ft1000dev);
static int ft1000_submit_rx_urb(PFT1000_INFO info);
-static void ft1000_hbchk(u_long data);
static int ft1000_start_xmit(struct sk_buff *skb, struct net_device *dev);
static int ft1000_open (struct net_device *dev);
static struct net_device_stats *ft1000_netdev_stats(struct net_device *dev);
-static struct timer_list poll_timer[MAX_NUM_CARDS];
static int ft1000_chkcard (struct ft1000_device *dev);
/*
static const struct net_device_ops ft1000net_ops = {
@@ -801,9 +799,6 @@ static int ft1000_reset_card (struct net_device *dev)
info->fProvComplete = 0;
//ft1000_disable_interrupts(dev);

- // Cancel heartbeat task since we are reloading the dsp
- //del_timer(&poll_timer[info->CardNumber]);
-
// Make sure we free any memory reserve for provisioning
while (list_empty(&info->prov_list) == 0) {
DEBUG("ft1000_hw:ft1000_reset_card:deleting provisioning record\n");
@@ -906,10 +901,6 @@ static int ft1000_reset_card (struct net_device *dev)

info->CardReady = 1;
//ft1000_enable_interrupts(dev);
- /* Schedule heartbeat process to run every 2 seconds */
- //poll_timer[info->CardNumber].expires = jiffies + (2*HZ);
- //poll_timer[info->CardNumber].data = (u_long)dev;
- //add_timer(&poll_timer[info->CardNumber]);

info->fCondResetPend = 0;
return TRUE;
@@ -1116,7 +1107,7 @@ int reg_ft1000_netdev(struct ft1000_device *ft1000dev, struct usb_interface *int
{
struct net_device *netdev;
FT1000_INFO *pInfo;
- int i, rc;
+ int rc;

netdev = ft1000dev->net;
pInfo = netdev_priv(ft1000dev->net);
@@ -1142,10 +1133,6 @@ int reg_ft1000_netdev(struct ft1000_device *ft1000dev, struct usb_interface *int

//INIT_LIST_HEAD(&pInfo->prov_list);

- for (i=0; i<MAX_NUM_CARDS; i++) {
- poll_timer[i].function = ft1000_hbchk;
- }
-

//hard code MAC address for now
/**
@@ -1918,140 +1905,7 @@ static int ft1000_chkcard (struct ft1000_device *dev) {
return TRUE;
}

-//---------------------------------------------------------------------------
-//
-// Function: ft1000_hbchk
-// Descripton: This function will perform the heart beat check of the DSP as
-// well as the ASIC.
-// Input:
-// dev - device structure
-// Output:
-// none
-//
-//---------------------------------------------------------------------------
-static void ft1000_hbchk(u_long data)
-{
- struct ft1000_device *dev = (struct ft1000_device *)data;
-
- FT1000_INFO *info;
- USHORT tempword;
- u16 status;
- info = (FT1000_INFO *) netdev_priv (dev->net);
-
- DEBUG("ft1000_hbchk called for CardNumber = %d CardReady = %d\n", info->CardNumber, info->CardReady);
-
- if (info->fCondResetPend == 1) {
- // Reset ASIC and DSP
- status = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER0, (PUCHAR)&(info->DSP_TIME[0]), FT1000_MAG_DSP_TIMER0_INDX);
- status = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER1, (PUCHAR)&(info->DSP_TIME[1]), FT1000_MAG_DSP_TIMER1_INDX);
- status = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER2, (PUCHAR)&(info->DSP_TIME[2]), FT1000_MAG_DSP_TIMER2_INDX);
- status = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER3, (PUCHAR)&(info->DSP_TIME[3]), FT1000_MAG_DSP_TIMER3_INDX);
-
- info->DrvErrNum = DSP_CONDRESET_INFO;
- DEBUG("ft1000_hw:DSP conditional reset requested\n");
- ft1000_reset_card(dev->net);
- info->fCondResetPend = 0;
- /* Schedule this module to run every 2 seconds */
-
- poll_timer[info->CardNumber].expires = jiffies + (2*HZ);
- poll_timer[info->CardNumber].data = (u_long)dev;
- add_timer(&poll_timer[info->CardNumber]);
-
-

- return;
- }
-
- if (info->CardReady == 1) {
- // Perform dsp heartbeat check
- status = ntohs(ft1000_read_dpram16(dev, FT1000_MAG_HI_HO, (PUCHAR)&tempword, FT1000_MAG_HI_HO_INDX));
- DEBUG("ft1000_hw:ft1000_hbchk:hi_ho value = 0x%x\n", tempword);
- // Let's perform another check if ho is not detected
- if (tempword != ho) {
- status = ntohs(ft1000_read_dpram16(dev, FT1000_MAG_HI_HO, (PUCHAR)&tempword,FT1000_MAG_HI_HO_INDX));
- }
- if (tempword != ho) {
- printk(KERN_INFO "ft1000: heartbeat failed - no ho detected\n");
- status = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER0, (PUCHAR)&(info->DSP_TIME[0]), FT1000_MAG_DSP_TIMER0_INDX);
- status = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER1, (PUCHAR)&(info->DSP_TIME[1]), FT1000_MAG_DSP_TIMER1_INDX);
- status = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER2, (PUCHAR)&(info->DSP_TIME[2]), FT1000_MAG_DSP_TIMER2_INDX);
- status = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER3, (PUCHAR)&(info->DSP_TIME[3]), FT1000_MAG_DSP_TIMER3_INDX);
- info->DrvErrNum = DSP_HB_INFO;
- if (ft1000_reset_card(dev->net) == 0) {
- printk(KERN_INFO "ft1000: Hardware Failure Detected - PC Card disabled\n");
- info->ProgConStat = 0xff;
- return;
- }
- /* Schedule this module to run every 2 seconds */
- poll_timer[info->CardNumber].expires = jiffies + (2*HZ);
- poll_timer[info->CardNumber].data = (u_long)dev;
- add_timer(&poll_timer[info->CardNumber]);
- return;
- }
-
- status = ft1000_read_register(dev, &tempword, FT1000_REG_DOORBELL);
- // Let's check doorbell again if fail
- if (tempword & FT1000_DB_HB) {
- status = ft1000_read_register(dev, &tempword, FT1000_REG_DOORBELL);
- }
- if (tempword & FT1000_DB_HB) {
- printk(KERN_INFO "ft1000: heartbeat doorbell not clear by firmware\n");
- status = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER0, (PUCHAR)&(info->DSP_TIME[0]), FT1000_MAG_DSP_TIMER0_INDX);
- status = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER1, (PUCHAR)&(info->DSP_TIME[1]), FT1000_MAG_DSP_TIMER1_INDX);
- status = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER2, (PUCHAR)&(info->DSP_TIME[2]), FT1000_MAG_DSP_TIMER2_INDX);
- status = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER3, (PUCHAR)&(info->DSP_TIME[3]), FT1000_MAG_DSP_TIMER3_INDX);
- info->DrvErrNum = DSP_HB_INFO;
- if (ft1000_reset_card(dev->net) == 0) {
- printk(KERN_INFO "ft1000: Hardware Failure Detected - PC Card disabled\n");
- info->ProgConStat = 0xff;
- return;
- }
- /* Schedule this module to run every 2 seconds */
- poll_timer[info->CardNumber].expires = jiffies + (2*HZ);
- poll_timer[info->CardNumber].data = (u_long)dev;
- add_timer(&poll_timer[info->CardNumber]);
- return;
- }
-
- // Set dedicated area to hi and ring appropriate doorbell according
- // to hi/ho heartbeat protocol
- ft1000_write_dpram16(dev, FT1000_MAG_HI_HO, hi_mag, FT1000_MAG_HI_HO_INDX);
-
- status = ntohs(ft1000_read_dpram16(dev, FT1000_MAG_HI_HO, (PUCHAR)&tempword, FT1000_MAG_HI_HO_INDX));
- // Let's write hi again if fail
- if (tempword != hi) {
- ft1000_write_dpram16(dev, FT1000_MAG_HI_HO, hi_mag, FT1000_MAG_HI_HO_INDX);
- status = ntohs(ft1000_read_dpram16(dev, FT1000_MAG_HI_HO, (PUCHAR)&tempword, FT1000_MAG_HI_HO_INDX));
-
- }
- if (tempword != hi) {
- printk(KERN_INFO "ft1000: heartbeat failed - cannot write hi into DPRAM\n");
- status = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER0, (PUCHAR)&(info->DSP_TIME[0]), FT1000_MAG_DSP_TIMER0_INDX);
- status = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER1, (PUCHAR)&(info->DSP_TIME[1]), FT1000_MAG_DSP_TIMER1_INDX);
- status = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER2, (PUCHAR)&(info->DSP_TIME[2]), FT1000_MAG_DSP_TIMER2_INDX);
- status = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER3, (PUCHAR)&(info->DSP_TIME[3]), FT1000_MAG_DSP_TIMER3_INDX);
-
- info->DrvErrNum = DSP_HB_INFO;
- if (ft1000_reset_card(dev->net) == 0) {
- printk(KERN_INFO "ft1000: Hardware Failure Detected - PC Card disabled\n");
- info->ProgConStat = 0xff;
- return;
- }
- /* Schedule this module to run every 2 seconds */
- poll_timer[info->CardNumber].expires = jiffies + (2*HZ);
- poll_timer[info->CardNumber].data = (u_long)dev;
- add_timer(&poll_timer[info->CardNumber]);
- return;
- }
- ft1000_write_register(dev, FT1000_DB_HB, FT1000_REG_DOORBELL);
-
- }
-
- /* Schedule this module to run every 2 seconds */
- poll_timer[info->CardNumber].expires = jiffies + (2*HZ);
- poll_timer[info->CardNumber].data = (u_long)dev;
- add_timer(&poll_timer[info->CardNumber]);
-}

//---------------------------------------------------------------------------
//
--
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Peter Zijlstra: "Re: [RFC][PATCH 7/7] perf: Optimize sw events"
Previous message: Jiri Kosina: "Re: [RFC v5]Update broken web addresses in arch directory."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]