[RFC/PATCH v2 2/3] usb: dummy_hcd code simplification
From: Tatyana Brokhman
Date: Mon Oct 18 2010 - 11:04:46 EST
Take handling of the control requests out from dummy_timer to a different
function.
Signed-off-by: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
---
drivers/usb/gadget/dummy_hcd.c | 284 ++++++++++++++++++++++++----------------
1 files changed, 168 insertions(+), 116 deletions(-)
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index dc65462..7640e06 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -1195,6 +1195,173 @@ static struct dummy_ep *find_endpoint (struct dummy *dum, u8 address)
#define Ep_Request (USB_TYPE_STANDARD | USB_RECIP_ENDPOINT)
#define Ep_InRequest (Ep_Request | USB_DIR_IN)
+
+/**
+ * This function handles all control transferes
+ *
+ * @param dum - pointer to dummy (the_controller)
+ * @param urb - the urb request to handle
+ * @param status - pointer to request handling status
+ * @param master - pointer to the dummy master this request was
+ * received for
+ */
+static int handle_control_request(struct dummy *dum, struct urb *urb,
+ int *status)
+{
+ struct usb_ctrlrequest setup;
+ struct dummy_ep *ep2;
+ int ret_val = 1;
+ unsigned w_index;
+ unsigned w_value;
+
+ setup = *(struct usb_ctrlrequest *) urb->setup_packet;
+ w_index = le16_to_cpu(setup.wIndex);
+ w_value = le16_to_cpu(setup.wValue);
+ switch (setup.bRequest) {
+ case USB_REQ_SET_ADDRESS:
+ if (setup.bRequestType != Dev_Request)
+ break;
+ dum->address = w_value;
+ *status = 0;
+ dev_dbg(udc_dev(dum), "set_address = %d\n",
+ w_value);
+ ret_val = 0;
+ break;
+ case USB_REQ_SET_FEATURE:
+ if (setup.bRequestType == Dev_Request) {
+ ret_val = 0;
+ switch (w_value) {
+ case USB_DEVICE_REMOTE_WAKEUP:
+ break;
+ case USB_DEVICE_B_HNP_ENABLE:
+ dum->gadget.b_hnp_enable = 1;
+ break;
+ case USB_DEVICE_A_HNP_SUPPORT:
+ dum->gadget.a_hnp_support = 1;
+ break;
+ case USB_DEVICE_A_ALT_HNP_SUPPORT:
+ dum->gadget.a_alt_hnp_support = 1;
+ break;
+ case USB_DEVICE_U1_ENABLE:
+ if (dum->gadget.speed == USB_SPEED_SUPER)
+ w_value = USB_DEV_STAT_U1_ENABLED;
+ else
+ ret_val = -EOPNOTSUPP;
+ break;
+ case USB_DEVICE_U2_ENABLE:
+ if (dum->gadget.speed == USB_SPEED_SUPER)
+ w_value = USB_DEV_STAT_U2_ENABLED;
+ else
+ ret_val = -EOPNOTSUPP;
+ break;
+ case USB_DEVICE_LTM_ENABLE:
+ if (dum->gadget.speed == USB_SPEED_SUPER)
+ w_value = USB_DEV_STAT_LTM_ENABLED;
+ else
+ ret_val = -EOPNOTSUPP;
+ break;
+ default:
+ ret_val = -EOPNOTSUPP;
+ }
+ if (ret_val == 0) {
+ dum->devstatus |= (1 << w_value);
+ *status = 0;
+ }
+ } else if (setup.bRequestType == Ep_Request) {
+ /* endpoint halt */
+ ep2 = find_endpoint(dum, w_index);
+ if (!ep2 || ep2->ep.name == ep0name) {
+ ret_val = -EOPNOTSUPP;
+ break;
+ }
+ ep2->halted = 1;
+ ret_val = 0;
+ *status = 0;
+ }
+ break;
+ case USB_REQ_CLEAR_FEATURE:
+ if (setup.bRequestType == Dev_Request) {
+ ret_val = 0;
+ switch (w_value) {
+ case USB_DEVICE_REMOTE_WAKEUP:
+ w_value = USB_DEVICE_REMOTE_WAKEUP;
+ break;
+ case USB_DEVICE_U1_ENABLE:
+ if (dum->gadget.speed == USB_SPEED_SUPER)
+ w_value = USB_DEV_STAT_U1_ENABLED;
+ else
+ ret_val = -EOPNOTSUPP;
+ break;
+ case USB_DEVICE_U2_ENABLE:
+ if (dum->gadget.speed == USB_SPEED_SUPER)
+ w_value = USB_DEV_STAT_U2_ENABLED;
+ else
+ ret_val = -EOPNOTSUPP;
+ break;
+ case USB_DEVICE_LTM_ENABLE:
+ if (dum->gadget.speed == USB_SPEED_SUPER)
+ w_value = USB_DEV_STAT_LTM_ENABLED;
+ else
+ ret_val = -EOPNOTSUPP;
+ break;
+ default:
+ ret_val = -EOPNOTSUPP;
+ break;
+ }
+ if (ret_val == 0) {
+ dum->devstatus &= ~(1 << w_value);
+ *status = 0;
+ }
+ } else if (setup.bRequestType == Ep_Request) {
+ /* endpoint halt */
+ ep2 = find_endpoint(dum, w_index);
+ if (!ep2) {
+ ret_val = -EOPNOTSUPP;
+ break;
+ }
+ if (!ep2->wedged)
+ ep2->halted = 0;
+ ret_val = 0;
+ *status = 0;
+ }
+ break;
+ case USB_REQ_GET_STATUS:
+ if (setup.bRequestType == Dev_InRequest
+ || setup.bRequestType == Intf_InRequest
+ || setup.bRequestType == Ep_InRequest) {
+ char *buf;
+ /*
+ * device: remote wakeup, selfpowered
+ * interface: nothing
+ * endpoint: halt
+ */
+ buf = (char *)urb->transfer_buffer;
+ if (urb->transfer_buffer_length > 0) {
+ if (setup.bRequestType == Ep_InRequest) {
+ ep2 = find_endpoint(dum, w_index);
+ if (!ep2) {
+ ret_val = -EOPNOTSUPP;
+ break;
+ }
+ buf[0] = ep2->halted;
+ } else if (setup.bRequestType ==
+ Dev_InRequest) {
+ buf[0] = (u8)dum->devstatus;
+ } else
+ buf[0] = 0;
+ }
+ if (urb->transfer_buffer_length > 1)
+ buf[1] = 0;
+ urb->actual_length = min_t(u32, 2,
+ urb->transfer_buffer_length);
+ ret_val = 0;
+ *status = 0;
+ }
+ break;
+ }
+ return ret_val;
+}
+
/* drive both sides of the transfers; looks like irq handlers to
* both drivers except the callbacks aren't in_irq().
*/
@@ -1297,14 +1464,8 @@ restart:
if (ep == &dum->ep [0] && ep->setup_stage) {
struct usb_ctrlrequest setup;
int value = 1;
- struct dummy_ep *ep2;
- unsigned w_index;
- unsigned w_value;
setup = *(struct usb_ctrlrequest*) urb->setup_packet;
- w_index = le16_to_cpu(setup.wIndex);
- w_value = le16_to_cpu(setup.wValue);
-
/* paranoia, in case of stale queued data */
list_for_each_entry (req, &ep->queue, queue) {
list_del_init (&req->queue);
@@ -1326,117 +1487,8 @@ restart:
ep->last_io = jiffies;
ep->setup_stage = 0;
ep->halted = 0;
- switch (setup.bRequest) {
- case USB_REQ_SET_ADDRESS:
- if (setup.bRequestType != Dev_Request)
- break;
- dum->address = w_value;
- status = 0;
- dev_dbg (udc_dev(dum), "set_address = %d\n",
- w_value);
- value = 0;
- break;
- case USB_REQ_SET_FEATURE:
- if (setup.bRequestType == Dev_Request) {
- value = 0;
- switch (w_value) {
- case USB_DEVICE_REMOTE_WAKEUP:
- break;
- case USB_DEVICE_B_HNP_ENABLE:
- dum->gadget.b_hnp_enable = 1;
- break;
- case USB_DEVICE_A_HNP_SUPPORT:
- dum->gadget.a_hnp_support = 1;
- break;
- case USB_DEVICE_A_ALT_HNP_SUPPORT:
- dum->gadget.a_alt_hnp_support
- = 1;
- break;
- default:
- value = -EOPNOTSUPP;
- }
- if (value == 0) {
- dum->devstatus |=
- (1 << w_value);
- status = 0;
- }
- } else if (setup.bRequestType == Ep_Request) {
- // endpoint halt
- ep2 = find_endpoint (dum, w_index);
- if (!ep2 || ep2->ep.name == ep0name) {
- value = -EOPNOTSUPP;
- break;
- }
- ep2->halted = 1;
- value = 0;
- status = 0;
- }
- break;
- case USB_REQ_CLEAR_FEATURE:
- if (setup.bRequestType == Dev_Request) {
- switch (w_value) {
- case USB_DEVICE_REMOTE_WAKEUP:
- dum->devstatus &= ~(1 <<
- USB_DEVICE_REMOTE_WAKEUP);
- value = 0;
- status = 0;
- break;
- default:
- value = -EOPNOTSUPP;
- break;
- }
- } else if (setup.bRequestType == Ep_Request) {
- // endpoint halt
- ep2 = find_endpoint (dum, w_index);
- if (!ep2) {
- value = -EOPNOTSUPP;
- break;
- }
- if (!ep2->wedged)
- ep2->halted = 0;
- value = 0;
- status = 0;
- }
- break;
- case USB_REQ_GET_STATUS:
- if (setup.bRequestType == Dev_InRequest
- || setup.bRequestType
- == Intf_InRequest
- || setup.bRequestType
- == Ep_InRequest
- ) {
- char *buf;
-
- // device: remote wakeup, selfpowered
- // interface: nothing
- // endpoint: halt
- buf = (char *)urb->transfer_buffer;
- if (urb->transfer_buffer_length > 0) {
- if (setup.bRequestType ==
- Ep_InRequest) {
- ep2 = find_endpoint (dum, w_index);
- if (!ep2) {
- value = -EOPNOTSUPP;
- break;
- }
- buf [0] = ep2->halted;
- } else if (setup.bRequestType ==
- Dev_InRequest) {
- buf [0] = (u8)
- dum->devstatus;
- } else
- buf [0] = 0;
- }
- if (urb->transfer_buffer_length > 1)
- buf [1] = 0;
- urb->actual_length = min_t(u32, 2,
- urb->transfer_buffer_length);
- value = 0;
- status = 0;
- }
- break;
- }
+ value = handle_control_request(dum, urb, &status);
/* gadget driver handles all other requests. block
* until setup() returns; no reentrancy issues etc.
--
1.6.3.3
--
Sent by an consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/