RE: [PATCHv5 2/3] ARM: imx: Add gpio-keys to plat-mxc

[Lothar Waßmann]

Hi,
> >> How do you suggest I define this pin for Babbage board only? Do I add to iomux-mx51.h
> >> #define MX51_BABBAGE_PAD_EIM_A27__GPIO_2_21             IOMUX_PAD(0x45c, 0x0c8, 1, 0x0,
> >0,MX51_GPIO_PAD_CTRL | PAD_CTL_PUS_100K_UP) ?
> >>
> >> Or do I define the pin in the board file with a 100K_UP? Like how eukrea_mbimxsd-baseboard.c did for
> >MBIMXSD_GPIO_3_31?
> >I'd suggest something local to your machine file.  Unfortunately I don't
> >see an easy way to reuse the generic MX51_PAD_EIM_A27__GPIO_2_21 to
> >define your local symbol.  So I think something like you wrote above
> >should be fine.
> >
> >Too bad that
> >
> >	#define MX51_BABBAGE_PAD_EIM_A27__GPIO_2_21 (MX51_PAD_EIM_A27__GPIO_2_21 | PAD_CTL_PUS_100K_UP)
> >
> >doesn't work.
> 
> Yes, I also wish I didn't have to redefine the pin just because of PAD setting change. I am going to send out another patch that basically sets the pad_desc.pad_ctrl=PAD_SETTING in mxc_init_board() function. I think it's a bit cleaner than having to redefine the pin.
> 
IMO the 'struct pad_desc' should be replaced with an u64 bitmap that
would allow for the pullup and other definitions that may be board
specific to be simply or'ed to the pad definition.

I could try to provide a patch if this is agreed on.


Lothar Waßmann
-- 
___________________________________________________________

Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info@xxxxxxxxxxxxxxxxxxx
___________________________________________________________
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/