pull request: wireless-2.6 2010-10-29

From: John W. Linville
Date: Fri Oct 29 2010 - 15:15:16 EST

Dave,

Here are more fixes intended for 2.6.37. Most are obvious one-liners
(more-or-less). The series from Luis fixes a bug as documented in the
changelog.

Please let me know if there are problems!

Thanks,

John

---

The following changes since commit 19449bfc10d163f0024dd5ae5808e28cda32e7b4:

stmmac: enable/disable rx/tx in the core with a single write. (2010-10-28 11:47:54 -0700)

are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git master

Felix Fietkau (1):
ath9k: fix tx aggregation flush on AR9003

Jesper Juhl (1):
mac80211: fix failure to check kmalloc return value in key_key_read

Jones Desougi (1):
ath5k: Fix double free on hw attach error path

Jouni Malinen (1):
mac80211: Fix scan_ies_len to include DS Params

Larry Finger (1):
b43: Fix warning at drivers/mmc/core/core.c:237 in mmc_wait_for_cmd

Luis R. Rodriguez (4):
ath9k: add locking for stopping RX
ath9k: add locking for starting the PCU on RX
ath9k: rename rxflushlock to pcu_lock
ath9k: lock reset and PCU start/stopping

Mohammed Shafi Shajakhan (1):
ath9k: Fix incorrect access of rate flags in RC

Paul Fox (1):
libertas: Fix sd8686 firmware reload

Rajkumar Manoharan (1):
ath9k_htc: Set proper firmware offset for Netgear WNDA3200

drivers/net/wireless/ath/ath5k/attach.c | 17 +++++++--------
drivers/net/wireless/ath/ath9k/ath9k.h | 2 +-
drivers/net/wireless/ath/ath9k/hif_usb.c | 10 +++++++-
drivers/net/wireless/ath/ath9k/main.c | 31 +++++++++++++++++++++++++++-
drivers/net/wireless/ath/ath9k/rc.c | 2 +-
drivers/net/wireless/ath/ath9k/recv.c | 15 ++++++-------
drivers/net/wireless/ath/ath9k/xmit.c | 18 ++++++++--------
drivers/net/wireless/b43/sdio.c | 2 +
drivers/net/wireless/libertas/if_sdio.c | 32 +++++++++++++++++++++++++++--
net/mac80211/debugfs_key.c | 6 ++++-
net/mac80211/main.c | 5 ++-
11 files changed, 102 insertions(+), 38 deletions(-)

diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c
index cd0b14a..fbe8aca 100644
--- a/drivers/net/wireless/ath/ath5k/attach.c
+++ b/drivers/net/wireless/ath/ath5k/attach.c
@@ -139,12 +139,12 @@ int ath5k_hw_attach(struct ath5k_softc *sc)
/* Fill the ath5k_hw struct with the needed functions */
ret = ath5k_hw_init_desc_functions(ah);
if (ret)
- goto err_free;
+ goto err;

/* Bring device out of sleep and reset its units */
ret = ath5k_hw_nic_wakeup(ah, 0, true);
if (ret)
- goto err_free;
+ goto err;

/* Get MAC, PHY and RADIO revisions */
ah->ah_mac_srev = srev;
@@ -234,7 +234,7 @@ int ath5k_hw_attach(struct ath5k_softc *sc)
} else {
ATH5K_ERR(sc, "Couldn't identify radio revision.\n");
ret = -ENODEV;
- goto err_free;
+ goto err;
}
}

@@ -244,7 +244,7 @@ int ath5k_hw_attach(struct ath5k_softc *sc)
(srev < AR5K_SREV_AR2425)) {
ATH5K_ERR(sc, "Device not yet supported.\n");
ret = -ENODEV;
- goto err_free;
+ goto err;
}

/*
@@ -252,7 +252,7 @@ int ath5k_hw_attach(struct ath5k_softc *sc)
*/
ret = ath5k_hw_post(ah);
if (ret)
- goto err_free;
+ goto err;

/* Enable pci core retry fix on Hainan (5213A) and later chips */
if (srev >= AR5K_SREV_AR5213A)
@@ -265,7 +265,7 @@ int ath5k_hw_attach(struct ath5k_softc *sc)
ret = ath5k_eeprom_init(ah);
if (ret) {
ATH5K_ERR(sc, "unable to init EEPROM\n");
- goto err_free;
+ goto err;
}

ee = &ah->ah_capabilities.cap_eeprom;
@@ -307,7 +307,7 @@ int ath5k_hw_attach(struct ath5k_softc *sc)
if (ret) {
ATH5K_ERR(sc, "unable to get device capabilities: 0x%04x\n",
sc->pdev->device);
- goto err_free;
+ goto err;
}

/* Crypto settings */
@@ -341,8 +341,7 @@ int ath5k_hw_attach(struct ath5k_softc *sc)
ath5k_hw_set_ledstate(ah, AR5K_LED_INIT);

return 0;
-err_free:
- kfree(ah);
+err:
return ret;
}

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 973c919..9b8e7e3 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -310,7 +310,7 @@ struct ath_rx {
u8 rxotherant;
u32 *rxlink;
unsigned int rxfilter;
- spinlock_t rxflushlock;
+ spinlock_t pcu_lock;
spinlock_t rxbuflock;
struct list_head rxbuf;
struct ath_descdma rxdma;
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 728d904..6576f68 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -801,10 +801,16 @@ static int ath9k_hif_usb_download_fw(struct hif_device_usb *hif_dev)
}
kfree(buf);

- if ((hif_dev->device_id == 0x7010) || (hif_dev->device_id == 0x7015))
+ switch (hif_dev->device_id) {
+ case 0x7010:
+ case 0x7015:
+ case 0x9018:
firm_offset = AR7010_FIRMWARE_TEXT;
- else
+ break;
+ default:
firm_offset = AR9271_FIRMWARE_TEXT;
+ break;
+ }

/*
* Issue FW download complete command to firmware.
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index c6ec800..b52f1cf 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -241,6 +241,9 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
*/
ath9k_hw_set_interrupts(ah, 0);
ath_drain_all_txq(sc, false);
+
+ spin_lock_bh(&sc->rx.pcu_lock);
+
stopped = ath_stoprecv(sc);

/* XXX: do not flush receive queue here. We don't want
@@ -268,6 +271,7 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
"reset status %d\n",
channel->center_freq, r);
spin_unlock_bh(&sc->sc_resetlock);
+ spin_unlock_bh(&sc->rx.pcu_lock);
goto ps_restore;
}
spin_unlock_bh(&sc->sc_resetlock);
@@ -276,9 +280,12 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
ath_print(common, ATH_DBG_FATAL,
"Unable to restart recv logic\n");
r = -EIO;
+ spin_unlock_bh(&sc->rx.pcu_lock);
goto ps_restore;
}

+ spin_unlock_bh(&sc->rx.pcu_lock);
+
ath_update_txpow(sc);
ath9k_hw_set_interrupts(ah, ah->imask);

@@ -613,7 +620,7 @@ void ath9k_tasklet(unsigned long data)
rxmask = (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN);

if (status & rxmask) {
- spin_lock_bh(&sc->rx.rxflushlock);
+ spin_lock_bh(&sc->rx.pcu_lock);

/* Check for high priority Rx first */
if ((ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) &&
@@ -621,7 +628,7 @@ void ath9k_tasklet(unsigned long data)
ath_rx_tasklet(sc, 0, true);

ath_rx_tasklet(sc, 0, false);
- spin_unlock_bh(&sc->rx.rxflushlock);
+ spin_unlock_bh(&sc->rx.pcu_lock);
}

if (status & ATH9K_INT_TX) {
@@ -876,6 +883,7 @@ void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw)
if (!ah->curchan)
ah->curchan = ath_get_curchannel(sc, sc->hw);

+ spin_lock_bh(&sc->rx.pcu_lock);
spin_lock_bh(&sc->sc_resetlock);
r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
if (r) {
@@ -890,8 +898,10 @@ void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw)
if (ath_startrecv(sc) != 0) {
ath_print(common, ATH_DBG_FATAL,
"Unable to restart recv logic\n");
+ spin_unlock_bh(&sc->rx.pcu_lock);
return;
}
+ spin_unlock_bh(&sc->rx.pcu_lock);

if (sc->sc_flags & SC_OP_BEACONS)
ath_beacon_config(sc, NULL); /* restart beacons */
@@ -930,6 +940,9 @@ void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
ath9k_hw_set_interrupts(ah, 0);

ath_drain_all_txq(sc, false); /* clear pending tx frames */
+
+ spin_lock_bh(&sc->rx.pcu_lock);
+
ath_stoprecv(sc); /* turn off frame recv */
ath_flushrecv(sc); /* flush recv queue */

@@ -947,6 +960,9 @@ void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
spin_unlock_bh(&sc->sc_resetlock);

ath9k_hw_phy_disable(ah);
+
+ spin_unlock_bh(&sc->rx.pcu_lock);
+
ath9k_hw_configpcipowersave(ah, 1, 1);
ath9k_ps_restore(sc);
ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
@@ -966,6 +982,9 @@ int ath_reset(struct ath_softc *sc, bool retry_tx)

ath9k_hw_set_interrupts(ah, 0);
ath_drain_all_txq(sc, retry_tx);
+
+ spin_lock_bh(&sc->rx.pcu_lock);
+
ath_stoprecv(sc);
ath_flushrecv(sc);

@@ -980,6 +999,8 @@ int ath_reset(struct ath_softc *sc, bool retry_tx)
ath_print(common, ATH_DBG_FATAL,
"Unable to start recv logic\n");

+ spin_unlock_bh(&sc->rx.pcu_lock);
+
/*
* We may be doing a reset in response to a request
* that changes the channel so update any state that
@@ -1142,6 +1163,7 @@ static int ath9k_start(struct ieee80211_hw *hw)
* be followed by initialization of the appropriate bits
* and then setup of the interrupt mask.
*/
+ spin_lock_bh(&sc->rx.pcu_lock);
spin_lock_bh(&sc->sc_resetlock);
r = ath9k_hw_reset(ah, init_channel, ah->caldata, false);
if (r) {
@@ -1150,6 +1172,7 @@ static int ath9k_start(struct ieee80211_hw *hw)
"(freq %u MHz)\n", r,
curchan->center_freq);
spin_unlock_bh(&sc->sc_resetlock);
+ spin_unlock_bh(&sc->rx.pcu_lock);
goto mutex_unlock;
}
spin_unlock_bh(&sc->sc_resetlock);
@@ -1171,8 +1194,10 @@ static int ath9k_start(struct ieee80211_hw *hw)
ath_print(common, ATH_DBG_FATAL,
"Unable to start recv logic\n");
r = -EIO;
+ spin_unlock_bh(&sc->rx.pcu_lock);
goto mutex_unlock;
}
+ spin_unlock_bh(&sc->rx.pcu_lock);

/* Setup our intr mask. */
ah->imask = ATH9K_INT_TX | ATH9K_INT_RXEOL |
@@ -1371,12 +1396,14 @@ static void ath9k_stop(struct ieee80211_hw *hw)
* before setting the invalid flag. */
ath9k_hw_set_interrupts(ah, 0);

+ spin_lock_bh(&sc->rx.pcu_lock);
if (!(sc->sc_flags & SC_OP_INVALID)) {
ath_drain_all_txq(sc, false);
ath_stoprecv(sc);
ath9k_hw_phy_disable(ah);
} else
sc->rx.rxlink = NULL;
+ spin_unlock_bh(&sc->rx.pcu_lock);

/* disable HAL and put h/w to sleep */
ath9k_hw_disable(ah);
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index 0cee90c..89978d7 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -527,7 +527,7 @@ static u8 ath_rc_setvalid_rates(struct ath_rate_priv *ath_rc_priv,
for (i = 0; i < rateset->rs_nrates; i++) {
for (j = 0; j < rate_table->rate_cnt; j++) {
u32 phy = rate_table->info[j].phy;
- u16 rate_flags = rate_table->info[i].rate_flags;
+ u16 rate_flags = rate_table->info[j].rate_flags;
u8 rate = rateset->rs_rates[i];
u8 dot11rate = rate_table->info[j].dot11rate;

diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index fe73fc5..fddb012 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -297,19 +297,17 @@ static void ath_edma_start_recv(struct ath_softc *sc)
ath_rx_addbuffer_edma(sc, ATH9K_RX_QUEUE_LP,
sc->rx.rx_edma[ATH9K_RX_QUEUE_LP].rx_fifo_hwsize);

- spin_unlock_bh(&sc->rx.rxbuflock);
-
ath_opmode_init(sc);

ath9k_hw_startpcureceive(sc->sc_ah, (sc->sc_flags & SC_OP_OFFCHANNEL));
+
+ spin_unlock_bh(&sc->rx.rxbuflock);
}

static void ath_edma_stop_recv(struct ath_softc *sc)
{
- spin_lock_bh(&sc->rx.rxbuflock);
ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_HP);
ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_LP);
- spin_unlock_bh(&sc->rx.rxbuflock);
}

int ath_rx_init(struct ath_softc *sc, int nbufs)
@@ -319,7 +317,7 @@ int ath_rx_init(struct ath_softc *sc, int nbufs)
struct ath_buf *bf;
int error = 0;

- spin_lock_init(&sc->rx.rxflushlock);
+ spin_lock_init(&sc->rx.pcu_lock);
sc->sc_flags &= ~SC_OP_RXFLUSH;
spin_lock_init(&sc->rx.rxbuflock);

@@ -506,10 +504,11 @@ int ath_startrecv(struct ath_softc *sc)
ath9k_hw_rxena(ah);

start_recv:
- spin_unlock_bh(&sc->rx.rxbuflock);
ath_opmode_init(sc);
ath9k_hw_startpcureceive(ah, (sc->sc_flags & SC_OP_OFFCHANNEL));

+ spin_unlock_bh(&sc->rx.rxbuflock);
+
return 0;
}

@@ -518,6 +517,7 @@ bool ath_stoprecv(struct ath_softc *sc)
struct ath_hw *ah = sc->sc_ah;
bool stopped;

+ spin_lock_bh(&sc->rx.rxbuflock);
ath9k_hw_stoppcurecv(ah);
ath9k_hw_setrxfilter(ah, 0);
stopped = ath9k_hw_stopdmarecv(ah);
@@ -526,19 +526,18 @@ bool ath_stoprecv(struct ath_softc *sc)
ath_edma_stop_recv(sc);
else
sc->rx.rxlink = NULL;
+ spin_unlock_bh(&sc->rx.rxbuflock);

return stopped;
}

void ath_flushrecv(struct ath_softc *sc)
{
- spin_lock_bh(&sc->rx.rxflushlock);
sc->sc_flags |= SC_OP_RXFLUSH;
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
ath_rx_tasklet(sc, 1, true);
ath_rx_tasklet(sc, 1, false);
sc->sc_flags &= ~SC_OP_RXFLUSH;
- spin_unlock_bh(&sc->rx.rxflushlock);
}

static bool ath_beacon_dtim_pending_cab(struct sk_buff *skb)
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 30ef2df..f2ade24 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1089,15 +1089,6 @@ void ath_draintxq(struct ath_softc *sc, struct ath_txq *txq, bool retry_tx)
txq->axq_tx_inprogress = false;
spin_unlock_bh(&txq->axq_lock);

- /* flush any pending frames if aggregation is enabled */
- if (sc->sc_flags & SC_OP_TXAGGR) {
- if (!retry_tx) {
- spin_lock_bh(&txq->axq_lock);
- ath_txq_drain_pending_buffers(sc, txq);
- spin_unlock_bh(&txq->axq_lock);
- }
- }
-
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
spin_lock_bh(&txq->axq_lock);
while (!list_empty(&txq->txq_fifo_pending)) {
@@ -1118,6 +1109,15 @@ void ath_draintxq(struct ath_softc *sc, struct ath_txq *txq, bool retry_tx)
}
spin_unlock_bh(&txq->axq_lock);
}
+
+ /* flush any pending frames if aggregation is enabled */
+ if (sc->sc_flags & SC_OP_TXAGGR) {
+ if (!retry_tx) {
+ spin_lock_bh(&txq->axq_lock);
+ ath_txq_drain_pending_buffers(sc, txq);
+ spin_unlock_bh(&txq->axq_lock);
+ }
+ }
}

void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx)
diff --git a/drivers/net/wireless/b43/sdio.c b/drivers/net/wireless/b43/sdio.c
index 45933cf..9a55338 100644
--- a/drivers/net/wireless/b43/sdio.c
+++ b/drivers/net/wireless/b43/sdio.c
@@ -175,7 +175,9 @@ static void b43_sdio_remove(struct sdio_func *func)
struct b43_sdio *sdio = sdio_get_drvdata(func);

ssb_bus_unregister(&sdio->ssb);
+ sdio_claim_host(func);
sdio_disable_func(func);
+ sdio_release_host(func);
kfree(sdio);
sdio_set_drvdata(func, NULL);
}
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index 296fd00..e5685dc 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -684,18 +684,40 @@ static int if_sdio_prog_firmware(struct if_sdio_card *card)

lbs_deb_enter(LBS_DEB_SDIO);

+ /*
+ * Disable interrupts
+ */
+ sdio_claim_host(card->func);
+ sdio_writeb(card->func, 0x00, IF_SDIO_H_INT_MASK, &ret);
+ sdio_release_host(card->func);
+
sdio_claim_host(card->func);
scratch = if_sdio_read_scratch(card, &ret);
sdio_release_host(card->func);

+ lbs_deb_sdio("firmware status = %#x\n", scratch);
+ lbs_deb_sdio("scratch ret = %d\n", ret);
+
if (ret)
goto out;

- lbs_deb_sdio("firmware status = %#x\n", scratch);

+ /*
+ * The manual clearly describes that FEDC is the right code to use
+ * to detect firmware presence, but for SD8686 it is not that simple.
+ * Scratch is also used to store the RX packet length, so we lose
+ * the FEDC value early on. So we use a non-zero check in order
+ * to validate firmware presence.
+ * Additionally, the SD8686 in the Gumstix always has the high scratch
+ * bit set, even when the firmware is not loaded. So we have to
+ * exclude that from the test.
+ */
if (scratch == IF_SDIO_FIRMWARE_OK) {
lbs_deb_sdio("firmware already loaded\n");
goto success;
+ } else if ((card->model == MODEL_8686) && (scratch & 0x7fff)) {
+ lbs_deb_sdio("firmware may be running\n");
+ goto success;
}

ret = lbs_get_firmware(&card->func->dev, lbs_helper_name, lbs_fw_name,
@@ -709,10 +731,14 @@ static int if_sdio_prog_firmware(struct if_sdio_card *card)
if (ret)
goto out;

+ lbs_deb_sdio("Helper firmware loaded\n");
+
ret = if_sdio_prog_real(card, mainfw);
if (ret)
goto out;

+ lbs_deb_sdio("Firmware loaded\n");
+
success:
sdio_claim_host(card->func);
sdio_set_block_size(card->func, IF_SDIO_BLOCK_SIZE);
@@ -1042,8 +1068,6 @@ static int if_sdio_probe(struct sdio_func *func,
priv->exit_deep_sleep = if_sdio_exit_deep_sleep;
priv->reset_deep_sleep_wakeup = if_sdio_reset_deep_sleep_wakeup;

- priv->fw_ready = 1;
-
sdio_claim_host(func);

/*
@@ -1064,6 +1088,8 @@ static int if_sdio_probe(struct sdio_func *func,
if (ret)
goto reclaim;

+ priv->fw_ready = 1;
+
/*
* FUNC_INIT is required for SD8688 WLAN/BT multiple functions
*/
diff --git a/net/mac80211/debugfs_key.c b/net/mac80211/debugfs_key.c
index 4aa47d0..1243d1d 100644
--- a/net/mac80211/debugfs_key.c
+++ b/net/mac80211/debugfs_key.c
@@ -203,9 +203,13 @@ static ssize_t key_key_read(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
struct ieee80211_key *key = file->private_data;
- int i, res, bufsize = 2 * key->conf.keylen + 2;
+ int i, bufsize = 2 * key->conf.keylen + 2;
char *buf = kmalloc(bufsize, GFP_KERNEL);
char *p = buf;
+ ssize_t res;
+
+ if (!buf)
+ return -ENOMEM;

for (i = 0; i < key->conf.keylen; i++)
p += scnprintf(p, bufsize + buf - p, "%02x", key->conf.key[i]);
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 6b322fa..107a0cb 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -677,10 +677,11 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
/*
* Calculate scan IE length -- we need this to alloc
* memory and to subtract from the driver limit. It
- * includes the (extended) supported rates and HT
+ * includes the DS Params, (extended) supported rates, and HT
* information -- SSID is the driver's responsibility.
*/
- local->scan_ies_len = 4 + max_bitrates; /* (ext) supp rates */
+ local->scan_ies_len = 4 + max_bitrates /* (ext) supp rates */ +
+ 3 /* DS Params */;
if (supp_ht)
local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap);

--
John W. Linville Someday the world will need a hero, and you
linville@xxxxxxxxxxxxx might be all we have. Be ready.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/