Re: [PATCH] mxcmmc: Add the ability to bind a regulator to managethe MMC card voltage

[Sascha Hauer]

On Tue, Nov 02, 2010 at 01:05:37AM +0100, Alberto Panizzo wrote:
> This implementation is based on the pxamci.c driver and it will
> be used to support the mx31_3ds machine.
> 
> Signed-off-by: Alberto Panizzo <maramaopercheseimorto@xxxxxxxxx>

Looks good to me

Acked-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>

> ---
> 
> This patch is based on the pengutronix for-rmk branch and apply to the
> linus tre, version:2.6.37-rc1
> 
> ..cc the lists, sorry for the double mail.
> 
>  drivers/mmc/host/mxcmmc.c |   48 +++++++++++++++++++++++++++++++++++++++-----
>  1 files changed, 42 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
> index 350f78e..e4637fc 100644
> --- a/drivers/mmc/host/mxcmmc.c
> +++ b/drivers/mmc/host/mxcmmc.c
> @@ -31,6 +31,7 @@
>  #include <linux/clk.h>
>  #include <linux/io.h>
>  #include <linux/gpio.h>
> +#include <linux/regulator/consumer.h>
>  
>  #include <asm/dma.h>
>  #include <asm/irq.h>
> @@ -141,10 +142,45 @@ struct mxcmci_host {
>  
>  	struct work_struct	datawork;
>  	spinlock_t		lock;
> +
> +	struct regulator	*vcc;
>  };
>  
>  static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios);
>  
> +static inline void mxcmci_init_ocr(struct mxcmci_host *host)
> +{
> +#ifdef CONFIG_REGULATOR
> +	host->vcc = regulator_get(mmc_dev(host->mmc), "vmmc");
> +
> +	if (IS_ERR(host->vcc)) {
> +		host->vcc = NULL;
> +	} else {
> +		host->mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vcc);
> +		if (host->pdata && host->pdata->ocr_avail)
> +			dev_warn(mmc_dev(host->mmc),
> +				"pdata->ocr_avail will not be used\n");
> +	}
> +#endif
> +	if (host->vcc == NULL) {
> +		/* fall-back to platform data */
> +		if (host->pdata && host->pdata->ocr_avail)
> +			host->mmc->ocr_avail = host->pdata->ocr_avail;
> +		else
> +			host->mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
> +	}
> +}
> +
> +static inline void mxcmci_set_power(struct mxcmci_host *host, unsigned int vdd)
> +{
> +#ifdef CONFIG_REGULATOR
> +	if (host->vcc)
> +		mmc_regulator_set_ocr(host->vcc, vdd);
> +#endif
> +	if (host->pdata && host->pdata->setpower)
> +		host->pdata->setpower(mmc_dev(host->mmc), vdd);
> +}
> +
>  static inline int mxcmci_use_dma(struct mxcmci_host *host)
>  {
>  	return host->do_dma;
> @@ -680,9 +716,9 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>  		host->cmdat &= ~CMD_DAT_CONT_BUS_WIDTH_4;
>  
>  	if (host->power_mode != ios->power_mode) {
> -		if (host->pdata && host->pdata->setpower)
> -			host->pdata->setpower(mmc_dev(mmc), ios->vdd);
> +		mxcmci_set_power(host, ios->vdd);
>  		host->power_mode = ios->power_mode;
> +
>  		if (ios->power_mode == MMC_POWER_ON)
>  			host->cmdat |= CMD_DAT_CONT_INIT;
>  	}
> @@ -808,10 +844,7 @@ static int mxcmci_probe(struct platform_device *pdev)
>  	host->pdata = pdev->dev.platform_data;
>  	spin_lock_init(&host->lock);
>  
> -	if (host->pdata && host->pdata->ocr_avail)
> -		mmc->ocr_avail = host->pdata->ocr_avail;
> -	else
> -		mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
> +	mxcmci_init_ocr(host);
>  
>  	if (host->pdata && host->pdata->dat3_card_detect)
>  		host->default_irq_mask =
> @@ -916,6 +949,9 @@ static int mxcmci_remove(struct platform_device *pdev)
>  
>  	mmc_remove_host(mmc);
>  
> +	if (host->vcc)
> +		regulator_put(host->vcc);
> +
>  	if (host->pdata && host->pdata->exit)
>  		host->pdata->exit(&pdev->dev, mmc);
>  
> -- 
> 1.6.3.3
> 
> 
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/