[PATCH 4/4][v2] rapidio, powerpc/85xx: Error interrupt handler for sRIO.

From: Shaohui Xie
Date: Wed Nov 03 2010 - 06:23:45 EST


The sRIO controller reports errors to the core with one signal, it uses
register EPWISR to provides the core quick access to where the error occurred.
The EPWISR indicates that there are 4 interrupts sources, port1, port2, message
unit and port write receive, but the sRIO driver does not support port2
for now, still the handler takes care of port2.
Currently the handler only clear error status without any recovery.

Signed-off-by: Shaohui Xie <b21989@xxxxxxxxxxxxx>
Cc: Li Yang <leoli@xxxxxxxxxxxxx>
Cc: Kumar Gala <kumar.gala@xxxxxxxxxxxxx>
Cc: Roy Zang <tie-fei.zang@xxxxxxxxxxxxx>
Cc: Alexandre Bounine <alexandre.bounine@xxxxxxx>
---
arch/powerpc/sysdev/fsl_rio.c | 86 +++++++++++++++++++++++++++++++++++++---
1 files changed, 79 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index a9bc1e8..8de86a8 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -10,7 +10,7 @@
* - Added Port-Write message handling
* - Added Machine Check exception handling
*
- * Copyright (C) 2007, 2008 Freescale Semiconductor, Inc.
+ * Copyright (C) 2007, 2008, 2010 Freescale Semiconductor, Inc.
* Zhang Wei <wei.zhang@xxxxxxxxxxxxx>
*
* Copyright 2005 MontaVista Software, Inc.
@@ -47,10 +47,36 @@
#define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq)
#define IRQ_RIO_PW(m) (((struct rio_priv *)(m->priv))->pwirq)

+/* EPWISR Error match value */
+#define EPWISR_ERR_PINT1 0x80000000
+#define EPWISR_ERR_PINT2 0x40000000
+#define EPWISR_ERR_MU 0x2
+#define EPWISR_ERR_PW 0x1
+
+#define IPWMR_CLEAR_QUEUE 0x00000002
+#define IPWSR_CLEAR 0x98
+#define OMSR_CLEAR 0x1cb3
+#define IMSR_CLEAR 0x491
+#define IDSR_CLEAR 0x91
+#define ODSR_CLEAR 0x1c00
+#define LTLEECSR_ENABLE_ALL 0xFFC000FC
+#define ESCSR_CLEAR 0x07120204
+
+#define RIO_EDCSR 0x0640
+#define PORT2_RIO_EDCSR 0x0680
+#define RIO_IECSR 0x10130
+#define PORT2_RIO_IECSR 0x101B0
+#define RIO_IM0SR 0x13064
+#define RIO_IM1SR 0x13164
+#define RIO_OM0SR 0x13004
+#define RIO_OM1SR 0x13104
+
+#define RIO_EPWISR_OFFSET 0x10010
#define RIO_ATMU_REGS_OFFSET 0x10c00
#define RIO_P_MSG_REGS_OFFSET 0x11000
#define RIO_S_MSG_REGS_OFFSET 0x13000
#define RIO_ESCSR 0x158
+#define PORT2_RIO_ESCSR 0x178
#define RIO_CCSR 0x15c
#define RIO_LTLEDCSR 0x0608
#define RIO_LTLEDCSR_IER 0x80000000
@@ -1003,6 +1029,40 @@ fsl_rio_dbell_handler(int irq, void *dev_instance)
return IRQ_HANDLED;
}

+static void port_error_handler(struct rio_mport *port, int offset)
+{
+ /*XXX: Error recovery is not implemented, we just clear errors */
+ out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
+
+ if (offset == 0) {
+ out_be32((u32 *)(rio_regs_win + RIO_EDCSR), 0);
+ out_be32((u32 *)(rio_regs_win + RIO_IECSR), 0);
+ out_be32((u32 *)(rio_regs_win + RIO_ESCSR), ESCSR_CLEAR);
+ } else {
+ out_be32((u32 *)(rio_regs_win + PORT2_RIO_EDCSR), 0);
+ out_be32((u32 *)(rio_regs_win + PORT2_RIO_IECSR), 0);
+ out_be32((u32 *)(rio_regs_win + PORT2_RIO_ESCSR), ESCSR_CLEAR);
+ }
+}
+
+static void msg_unit_error_handler(struct rio_mport *port)
+{
+ struct rio_priv *priv = port->priv;
+
+ /*XXX: Error recovery is not implemented, we just clear errors */
+ out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
+
+ out_be32((u32 *)(rio_regs_win + RIO_IM0SR), IMSR_CLEAR);
+ out_be32((u32 *)(rio_regs_win + RIO_IM1SR), IMSR_CLEAR);
+ out_be32((u32 *)(rio_regs_win + RIO_OM0SR), OMSR_CLEAR);
+ out_be32((u32 *)(rio_regs_win + RIO_OM1SR), OMSR_CLEAR);
+
+ out_be32(&priv->msg_regs->odsr, ODSR_CLEAR);
+ out_be32(&priv->msg_regs->dsr, IDSR_CLEAR);
+
+ out_be32(&priv->msg_regs->pwsr, IPWSR_CLEAR);
+}
+
/**
* fsl_rio_doorbell_init - MPC85xx doorbell interface init
* @mport: Master port implementing the inbound doorbell unit
@@ -1082,14 +1142,24 @@ fsl_rio_port_write_handler(int irq, void *dev_instance)
ipwsr = in_be32(&priv->msg_regs->pwsr);

epwisr = in_be32(priv->regs_win + RIO_EPWISR);
- if (epwisr & 0x80000000) {
+ if (epwisr & EPWISR_ERR_PINT1) {
tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
pr_info("RIO_LTLEDCSR = 0x%x\n", tmp);
- out_be32(priv->regs_win + RIO_LTLEDCSR, 0);
+ port_error_handler(port, 0);
+ }
+
+ if (epwisr & EPWISR_ERR_PINT2) {
+ pr_info("RIO: port2 error\n");
+ port_error_handler(port, 1);
+ }
+
+ if (epwisr & EPWISR_ERR_MU) {
+ pr_info("RIO: message unit error\n");
+ msg_unit_error_handler(port);
}

- if (!(epwisr & 0x00000001))
- return IRQ_HANDLED;
+ if (!(epwisr & EPWISR_ERR_PW))
+ return IRQ_NONE;

#ifdef DEBUG_PW
pr_debug("PW Int->IPWMR: 0x%08x IPWSR: 0x%08x (", ipwmr, ipwsr);
@@ -1249,12 +1319,14 @@ static int fsl_rio_port_write_init(struct rio_mport *mport)


/* Hook up port-write handler */
- rc = request_irq(IRQ_RIO_PW(mport), fsl_rio_port_write_handler, 0,
- "port-write", (void *)mport);
+ rc = request_irq(IRQ_RIO_PW(mport), fsl_rio_port_write_handler,
+ IRQF_SHARED, "port-write", (void *)mport);
if (rc < 0) {
pr_err("MPC85xx RIO: unable to request inbound doorbell irq");
goto err_out;
}
+ /* Enable Error Interrupt */
+ out_be32((u32 *)(rio_regs_win + RIO_LTLEECSR), LTLEECSR_ENABLE_ALL);

INIT_WORK(&priv->pw_work, fsl_pw_dpc);
spin_lock_init(&priv->pw_fifo_lock);
--
1.6.4


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/