Re: [PATCH] Fix Winbond CIR driver initialisation

From: Sean Young
Date: Wed Nov 10 2010 - 11:40:13 EST


On Sun, Nov 07, 2010 at 03:46:48PM +0000, Alan Cox wrote:
> > A workaround is to boot with argument 8250.nr_uarts=1. This is not really
> > desirable, so this patch makes ttyS1 go away.
>
> setserial can also be used for this surely ?
>
> > + dev_info(device, "Unregistering phony serial port ttyS1\n");
> > + serial8250_unregister_port(1);
> > + ok = request_region(data->sbase, SP_IOMEM_LEN, DRVNAME);
>
> That's a hack that is only going to work on specific systems where it is
> mapped the way you expect and doing stuff behind the back of the serial
> driver.
>
> I'm not averse to a better solution but it needs to be general and
> maintainable. Is there a way to identify the presence of the windbond CIR
> device as opposed to an 8250 ?

The past couple of days I've been trying to find a way of identifying the
winbond cir device correctly in the 8250 driver by its registers, but so
far I've had no luck. It is a device which can operate in CEIR, UART and
one the irda modes, but all I can find for identifying what is physically
connected is querying the Super I/O model or the PNP identifier for CIR.

The Super I/O model might not be enough in cases where different things
can be connected to it physically.

The hardware can be flipped between various IR (SIR/CIR/etc) and normal
uart modes. We could have an new call which represents this a bit
more closely.

To ensure it is mapped as expected, the call should include the I/O
port range and irq.

bool serial8250_port_non_uart(int ioport, int ioportlen, int irq);

The 8250 serial driver would unregister the port which matches this, and
unregister the corresponding port, returning true if such a port can be
found.

This problem here is also one which is encountered by some of the irda
drivers, so it would be nice to solve as well for those too.

Would that make more sense?

Regards,
Sean
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/