RE: [RFC v1 PATCH 5/6] input: pmic8058-othc: Add support for PM8058based OTHC

From: Datta, Shubhrajyoti
Date: Tue Nov 16 2010 - 00:36:45 EST

Hi Anirudh,

> -----Original Message-----
> From: linux-input-owner@xxxxxxxxxxxxxxx [mailto:linux-input-
> owner@xxxxxxxxxxxxxxx] On Behalf Of Trilok Soni
> Sent: Wednesday, November 10, 2010 6:18 PM
> To: linux-kernel@xxxxxxxxxxxxxxx
> Cc: linux-input@xxxxxxxxxxxxxxx; rtc-linux@xxxxxxxxxxxxxxxx; linux-arm-
> msm@xxxxxxxxxxxxxxx; Anirudh Ghayal; Dmitry Torokhov
> Subject: [RFC v1 PATCH 5/6] input: pmic8058-othc: Add support for PM8058
> based OTHC
>
> From: Anirudh Ghayal <aghayal@xxxxxxxxxxxxxx>
>
> One-touch headset controller is a hardware module in Qualcomm's PMIC8058.
> It supports headset insert/remove and switch press/release detection
> events
> over 3 MIC BIAS lines. The MIC BIAS lines can be configured to support
> headset detection or act as regular BIAS lines.
Could you help with the datasheet link if it is free.

>
> Cc: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
> Signed-off-by: Anirudh Ghayal <aghayal@xxxxxxxxxxxxxx>
> ---
> drivers/input/misc/Kconfig | 10 +
> drivers/input/misc/Makefile | 1 +
> drivers/input/misc/pmic8058-othc.c | 544
> +++++++++++++++++++++++++++++++++++
> include/linux/input/pmic8058-othc.h | 117 ++++++++
> 4 files changed, 672 insertions(+), 0 deletions(-)
> create mode 100644 drivers/input/misc/pmic8058-othc.c
> create mode 100644 include/linux/input/pmic8058-othc.h
>
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index aeb9165..df6097c 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -359,6 +359,16 @@ config INPUT_PMIC8058_PWRKEY
> To compile this driver as a module, choose M here: the
> module will be called pmic8058-pwrkey.
>
> +config INPUT_PMIC8058_OTHC
> + tristate "Qualcomm PMIC8058 OTHC support"
> + depends on PMIC8058
> + help
> + Say Y here if you want support PMIC8058 One-touch Headset
> Controller
> + (OTHC)
> +
> + To compile this driver as a module, choose M here: the
> + module will be called pmic8058-othc.
> +
> config INPUT_GPIO_ROTARY_ENCODER
> tristate "Rotary encoders connected to GPIO pins"
> depends on GPIOLIB && GENERIC_GPIO
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index c4357a0..a713370 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -29,6 +29,7 @@ obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o
> obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o
> obj-$(CONFIG_INPUT_PCF8574) += pcf8574_keypad.o
> obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o
> +obj-$(CONFIG_INPUT_PMIC8058_OTHC) += pmic8058-othc.o
> obj-$(CONFIG_INPUT_POWERMATE) += powermate.o
> obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o
> obj-$(CONFIG_INPUT_PMIC8058_PWRKEY) += pmic8058-pwrkey.o
> diff --git a/drivers/input/misc/pmic8058-othc.c
> b/drivers/input/misc/pmic8058-othc.c
> new file mode 100644
> index 0000000..78f157a
> --- /dev/null
> +++ b/drivers/input/misc/pmic8058-othc.c
> @@ -0,0 +1,544 @@
> +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
> + * 02110-1301, USA.
> + */
> +
> +#define pr_fmt(fmt) "%s:" fmt, __func__
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/interrupt.h>
> +#include <linux/input.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm.h>
> +
> +#include <linux/mfd/pmic8058.h>
> +#include <linux/input/pmic8058-othc.h>
> +
> +#define PM8058_OTHC_LOW_CURR_MASK 0xF0
> +#define PM8058_OTHC_HIGH_CURR_MASK 0x0F
> +#define PM8058_OTHC_EN_SIG_MASK 0x3F
> +#define PM8058_OTHC_HYST_PREDIV_MASK 0xC7
> +#define PM8058_OTHC_CLK_PREDIV_MASK 0xF8
> +#define PM8058_OTHC_HYST_CLK_MASK 0x0F
> +#define PM8058_OTHC_PERIOD_CLK_MASK 0xF0
> +
> +#define PM8058_OTHC_LOW_CURR_SHIFT 0x4
> +#define PM8058_OTHC_EN_SIG_SHIFT 0x6
> +#define PM8058_OTHC_HYST_PREDIV_SHIFT 0x3
> +#define PM8058_OTHC_HYST_CLK_SHIFT 0x4
> +
> +#define PM8058_OTHC_LOW_CURR_MIRROR 10
> +#define PM8058_OTHC_HIGH_CURR_MIRROR 100
> +#define PM8058_OTHC_CLK_SRC_SHIFT 10
> +
> +/**
> + * struct pm8058_othc - othc driver data structure
> + * @othc_ipd: input device for othc
> + * @othc_pdata: a pointer to the platform data
> + * @othc_base: base address of the OTHC controller
> + * @othc_irq_sw: switch detect irq number
> + * @othc_irq_ir: headset jack detect irq number
> + * @othc_sw_state: current state of the switch
> + * @othc_ir_state: current state of the headset
> + * @switch_reject: indicates if valid switch press
> + * @switch_debounce_ms: the debounce time for the switch
> + * @lock: spin lock variable
> + * @timer: timer for switch debounce time
> + * @pm_chip: pointer to the pm8058 parent chip
> + */
> +struct pm8058_othc {
> + struct input_dev *othc_ipd;
> + struct pmic8058_othc_config_pdata *othc_pdata;
> + int othc_base;
> + int othc_irq_sw;
> + int othc_irq_ir;
> + bool othc_sw_state;
> + bool othc_ir_state;
> + bool switch_reject;
> + unsigned long switch_debounce_ms;
> + spinlock_t lock;
> + struct timer_list timer;
> + struct pm8058_chip *pm_chip;
> +};
> +
> +static struct pm8058_othc *config[OTHC_MICBIAS_MAX];
> +
> +/**
> + * pm8058_micbias_enable() - Enables/Disables the MIC_BIAS
> + * @micbias: MIC BIAS line which needs to be enabled
> + * @enable: operational state for the MIC BIAS line
> + *
> + * The API pm8058_micbias_enable() configures the MIC_BIAS. Only the
> lines
> + * which are not used for headset detection can be configured using this
> API.
> + * The API returns an error code if it fails to configure, else it
> returns 0.
> + */
> +int pm8058_micbias_enable(enum othc_micbias micbias,
> + enum othc_micbias_enable enable)
> +{
> + int rc;
> + u8 reg;
> + struct pm8058_othc *dd = config[micbias];
> +
> + if (dd == NULL) {
> + pr_err("MIC_BIAS not registered, cannot enable\n");
> + return -ENODEV;
> + }
> +
> + if (dd->othc_pdata->micbias_capability != OTHC_MICBIAS) {
> + pr_err("MIC_BIAS enable capability not supported\n");
> + return -EINVAL;
> + }
> +
> + rc = pm8058_read(dd->pm_chip, dd->othc_base + 1, &reg, 1);
> + if (rc < 0) {
> + pr_err("PM8058 read failed\n");
> + return rc;
> + }
> +
> + reg &= PM8058_OTHC_EN_SIG_MASK;
> + reg |= (enable << PM8058_OTHC_EN_SIG_SHIFT);
> +
> + rc = pm8058_write(dd->pm_chip, dd->othc_base + 1, &reg, 1);
> + if (rc < 0) {
> + pr_err("PM8058 write failed\n");
> + return rc;
> + }
> +
> + return rc;
> +}
> +EXPORT_SYMBOL(pm8058_micbias_enable);
> +
> +#ifdef CONFIG_PM
> +static int pm8058_othc_suspend(struct device *dev)
> +{
> + struct pm8058_othc *dd = dev_get_drvdata(dev);
> +
> + if (dd->othc_pdata->micbias_capability == OTHC_MICBIAS_HSED) {
> + if (device_may_wakeup(dev)) {
> + enable_irq_wake(dd->othc_irq_sw);
> + enable_irq_wake(dd->othc_irq_ir);
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int pm8058_othc_resume(struct device *dev)
> +{
> + struct pm8058_othc *dd = dev_get_drvdata(dev);
> +
> + if (dd->othc_pdata->micbias_capability == OTHC_MICBIAS_HSED) {
> + if (device_may_wakeup(dev)) {
> + disable_irq_wake(dd->othc_irq_sw);
> + disable_irq_wake(dd->othc_irq_ir);
> + }
> + }
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops pm8058_othc_pm_ops = {
> + .suspend = pm8058_othc_suspend,
> + .resume = pm8058_othc_resume,
> +};
> +#endif
> +
> +static int __devexit pm8058_othc_remove(struct platform_device *pd)
> +{
> + struct pm8058_othc *dd = platform_get_drvdata(pd);
> +
> + if (dd->othc_pdata->micbias_capability == OTHC_MICBIAS_HSED) {
> + device_init_wakeup(&pd->dev, 0);
> + free_irq(dd->othc_irq_sw, dd);
> + free_irq(dd->othc_irq_ir, dd);
> + del_timer_sync(&dd->timer);
> + input_unregister_device(dd->othc_ipd);
> + }
> +
> + kfree(dd);
> +
> + return 0;
> +}
> +
> +static void pm8058_othc_timer(unsigned long handle)
> +{
> + unsigned long flags;
> + struct pm8058_othc *dd = (struct pm8058_othc *)handle;
> +
> + spin_lock_irqsave(&dd->lock, flags);
> + dd->switch_reject = false;
> + spin_unlock_irqrestore(&dd->lock, flags);
> +}
> +
> +static irqreturn_t pm8058_no_sw(int irq, void *dev_id)
> +{
> + struct pm8058_othc *dd = dev_id;
> + unsigned long flags;
> +
> + /*
> + * Due to a hardware bug, spurious switch interrutps are seen while
> + * inserting the headset slowly. A timer based logic rejects these
> + * switch interrutps.
> + */
> + spin_lock_irqsave(&dd->lock, flags);
> + if (dd->switch_reject == true) {
> + spin_unlock_irqrestore(&dd->lock, flags);
> + return IRQ_HANDLED;
> + }
> + spin_unlock_irqrestore(&dd->lock, flags);
> +
> + if (dd->othc_sw_state == false) {
> + dd->othc_sw_state = true;
> + input_report_key(dd->othc_ipd, KEY_MEDIA, 1);
> + } else if (dd->othc_sw_state == true) {
> + dd->othc_sw_state = false;
> + input_report_key(dd->othc_ipd, KEY_MEDIA, 0);
> + }
> + input_sync(dd->othc_ipd);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t pm8058_nc_ir(int irq, void *dev_id)
> +{
> + unsigned long flags;
> + struct pm8058_othc *dd = dev_id;
> +
> + spin_lock_irqsave(&dd->lock, flags);
> + dd->switch_reject = true;
> + spin_unlock_irqrestore(&dd->lock, flags);
> +
> + mod_timer(&dd->timer, jiffies +
> + msecs_to_jiffies(dd->switch_debounce_ms));
> +
> + if (dd->othc_ir_state == false) {
> + dd->othc_ir_state = true;
> + input_report_key(dd->othc_ipd, SW_HEADPHONE_INSERT, 1);
> + } else {
> + dd->othc_ir_state = false;
> + input_report_key(dd->othc_ipd, SW_HEADPHONE_INSERT, 0);
> + }
> +
> + input_sync(dd->othc_ipd);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int pm8058_configure_othc(struct pm8058_othc *dd)
> +{
> + int rc;
> + u8 reg, value;
> + u32 value1;
> + u16 base_addr = dd->othc_base;
> + struct othc_hsed_config *hsed_config = dd->othc_pdata->hsed_config;
> +
> + /* Control Register 1*/
> + rc = pm8058_read(dd->pm_chip, base_addr, &reg, 1);
> + if (rc < 0) {
> + pr_err("PM8058 read failed\n");
> + return rc;
> + }
> +
> + if (hsed_config->othc_headset == OTHC_HEADSET_NO) {
> + /* set iDAC high current threshold */
> + value = (hsed_config->othc_highcurr_thresh_uA /
> + PM8058_OTHC_HIGH_CURR_MIRROR) - 2;
> + reg = (reg & PM8058_OTHC_HIGH_CURR_MASK) | value;
> + } else {
> + /* set iDAC low current threshold */
> + value = (hsed_config->othc_lowcurr_thresh_uA /
> + PM8058_OTHC_LOW_CURR_MIRROR) - 1;
> + reg &= PM8058_OTHC_LOW_CURR_MASK;
> + reg |= (value << PM8058_OTHC_LOW_CURR_SHIFT);
> + }
> +
> + rc = pm8058_write(dd->pm_chip, base_addr, &reg, 1);
> + if (rc < 0) {
> + pr_err("PM8058 read failed\n");
> + return rc;
> + }
> +
> + /* Control register 2*/
> + rc = pm8058_read(dd->pm_chip, base_addr + 1, &reg, 1);
> + if (rc < 0) {
> + pr_err("PM8058 read failed\n");
> + return rc;
> + }
> +
> + value = dd->othc_pdata->micbias_enable;
> + reg &= PM8058_OTHC_EN_SIG_MASK;
> + reg |= (value << PM8058_OTHC_EN_SIG_SHIFT);
> +
> + value = 0;
> + value1 = (hsed_config->othc_hyst_prediv_us <<
> + PM8058_OTHC_CLK_SRC_SHIFT) / USEC_PER_SEC;
> + while (value1 != 0) {
> + value1 = value1 >> 1;
> + value++;
> + }
> + if (value > 7) {
> + pr_err("Invalid input argument - othc_hyst_prediv_us\n");
> + return -EINVAL;
> + }
> + reg &= PM8058_OTHC_HYST_PREDIV_MASK;
> + reg |= (value << PM8058_OTHC_HYST_PREDIV_SHIFT);
> +
> + value = 0;
> + value1 = (hsed_config->othc_period_clkdiv_us <<
> + PM8058_OTHC_CLK_SRC_SHIFT) / USEC_PER_SEC;
> + while (value1 != 1) {
> + value1 = value1 >> 1;
> + value++;
> + }
> + if (value > 8) {
> + pr_err("Invalid input argument - othc_period_clkdiv_us\n");
> + return -EINVAL;
> + }
> + reg = (reg & PM8058_OTHC_CLK_PREDIV_MASK) | (value - 1);
> +
> + rc = pm8058_write(dd->pm_chip, base_addr + 1, &reg, 1);
> + if (rc < 0) {
> + pr_err("PM8058 read failed\n");
> + return rc;
> + }
> +
> + /* Control register 3 */
> + rc = pm8058_read(dd->pm_chip, base_addr + 2 , &reg, 1);
> + if (rc < 0) {
> + pr_err("PM8058 read failed\n");
> + return rc;
> + }
> +
> + value = hsed_config->othc_hyst_clk_us /
> + hsed_config->othc_hyst_prediv_us;
> + if (value > 15) {
> + pr_err("Invalid input argument - othc_hyst_prediv_us\n");
> + return -EINVAL;
> + }
> + reg &= PM8058_OTHC_HYST_CLK_MASK;
> + reg |= value << PM8058_OTHC_HYST_CLK_SHIFT;
> +
> + value = hsed_config->othc_period_clk_us /
> + hsed_config->othc_period_clkdiv_us;
> + if (value > 15) {
> + pr_err("Invalid input argument - othc_hyst_prediv_us\n");
> + return -EINVAL;
> + }
> + reg = (reg & PM8058_OTHC_PERIOD_CLK_MASK) | value;
> +
> + rc = pm8058_write(dd->pm_chip, base_addr + 2, &reg, 1);
> + if (rc < 0) {
> + pr_err("PM8058 read failed\n");
> + return rc;
> + }
> +
> + return 0;
> +}
> +
> +static int
If this is called only at init it can also be a devinit ?

> +pm8058_othc_configure_hsed(struct pm8058_othc *dd, struct platform_device
> *pd)
> +{
> + int rc;
> + struct input_dev *ipd;
> + struct pmic8058_othc_config_pdata *pdata = pd->dev.platform_data;
> + struct othc_hsed_config *hsed_config = pdata->hsed_config;
> +
> + ipd = input_allocate_device();
> + if (ipd == NULL) {
> + dev_err(&pd->dev, "Memory allocate to input device
> failed!\n");
> + rc = -ENOMEM;
> + goto fail_input_alloc;
> + }
> +
> + dd->othc_irq_sw = platform_get_irq(pd, 0);
> + dd->othc_irq_ir = platform_get_irq(pd, 1);
> + if (dd->othc_irq_ir < 0 || dd->othc_irq_sw < 0) {
> + dev_err(&pd->dev, "othc resource:IRQ_IR absent!\n");
> + rc = -ENXIO;
> + goto fail_othc_config;
> + }
> +
> + ipd->name = "pmic8058_othc";
> + ipd->phys = "pmic8058_othc/input0";
> + ipd->dev.parent = &pd->dev;
> +
> + input_set_capability(ipd, EV_SW, SW_HEADPHONE_INSERT);
> + input_set_capability(ipd, EV_KEY, KEY_MEDIA);
> +
> + input_set_drvdata(ipd, dd);
> +
> + dd->othc_ipd = ipd;
> + dd->othc_sw_state = false;
> + dd->othc_ir_state = false;
> + spin_lock_init(&dd->lock);
> + dd->switch_debounce_ms = hsed_config->switch_debounce_ms;
> + setup_timer(&dd->timer, pm8058_othc_timer, (unsigned long) dd);
> +
> + rc = pm8058_configure_othc(dd);
> + if (rc < 0)
> + goto fail_othc_config;
> +
> + rc = input_register_device(ipd);
> + if (rc) {
> + dev_err(&pd->dev, "Register OTHC device failed!\n");
> + goto fail_othc_config;
> + }
> +
> + /* Check if the headset is already inserted during boot up */
> + rc = pm8058_irq_get_rt_status(dd->pm_chip, dd->othc_irq_ir);
> + if (rc < 0) {
> + dev_err(&pd->dev, "Unable to get headset status at boot!\n");
> + goto fail_ir_irq;
> + }
> + if (rc) {
> + dev_dbg(&pd->dev, "Headset inserted during boot up!\n");
> + dd->othc_ir_state = true;
> + input_report_switch(dd->othc_ipd, SW_HEADPHONE_INSERT, 1);
> + input_sync(dd->othc_ipd);
> + }
Not a comment. However I did not understand why the status at boot is required here.
> +
> + rc = request_any_context_irq(dd->othc_irq_ir, pm8058_nc_ir,
> + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> + "pm8058_othc_ir", dd);
> + if (rc < 0) {
> + dev_err(&pd->dev, "Request pm8058_othc_ir IRQ failed!\n");
> + goto fail_ir_irq;
> + }
> +
> + rc = request_any_context_irq(dd->othc_irq_sw, pm8058_no_sw,
> + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> + "pm8058_othc_sw", dd);
> + if (rc < 0) {
> + dev_err(&pd->dev, "Request pm8058_othc_sw IRQ failed!\n");
> + goto fail_sw_irq;
> + }
> +
> + device_init_wakeup(&pd->dev, hsed_config->othc_wakeup);
> +
> + return 0;
> +
> +fail_sw_irq:
> + free_irq(dd->othc_irq_ir, dd);
> +fail_ir_irq:
> + input_unregister_device(ipd);
Unregister and then falling back to free may not be what you intended.


> + dd->othc_ipd = NULL;
> +fail_othc_config:
> + input_free_device(ipd);
> +fail_input_alloc:
> + return rc;
> +}
> +
> +static int __devinit pm8058_othc_probe(struct platform_device *pd)
> +{
> + int rc;
> + struct pm8058_othc *dd;
> + struct pm8058_chip *chip;
> + struct resource *res;
> + struct pmic8058_othc_config_pdata *pdata = pd->dev.platform_data;
> +
> + chip = platform_get_drvdata(pd);
> + if (chip == NULL) {
> + dev_err(&pd->dev, "Invalid driver information!\n");
> + return -EINVAL;
> + }
> +
> + /* PMIC8058 version A0 not supported */
> + if (pm8058_rev(chip) == PM_8058_REV_1p0) {
> + dev_err(&pd->dev, "PMIC8058 version not supported!\n");
> + return -ENODEV;
> + }
> +
> + if (pdata == NULL) {
> + dev_err(&pd->dev, "Platform data not present!\n");
> + return -EINVAL;
> + }
> +
> + dd = kzalloc(sizeof(*dd), GFP_KERNEL);
> + if (dd == NULL) {
> + dev_err(&pd->dev, "Unable to allocate memory!\n");
> + return -ENOMEM;
> + }
> +
> + res = platform_get_resource_byname(pd, IORESOURCE_IO, "othc_base");
> + if (res == NULL) {
> + dev_err(&pd->dev, "OTHC Base address, resource absent!\n");
> + rc = -ENXIO;
> + goto fail_get_res;
> + }
> +
> + dd->othc_pdata = pdata;
> + dd->pm_chip = chip;
> + dd->othc_base = res->start;
> +
> + platform_set_drvdata(pd, dd);
> +
> + if (pdata->micbias_capability == OTHC_MICBIAS_HSED) {
> + /* HSED to be supported on this MICBIAS line */
> + if (pdata->hsed_config != NULL) {
> + rc = pm8058_othc_configure_hsed(dd, pd);
> + if (rc < 0)
> + goto fail_get_res;
> + } else {
> + dev_err(&pd->dev, "HSED config data absent!\n");
> + rc = -EINVAL;
> + goto fail_get_res;
> + }
> + }
> +
> + /* Store the local driver data structure */
> + if (dd->othc_pdata->micbias_select < OTHC_MICBIAS_MAX)
> + config[dd->othc_pdata->micbias_select] = dd;
> +
> + dev_dbg(&pd->dev, "Device %s:%d successfully registered\n",
> + pd->name, pd->id);
> + return 0;
> +
> +fail_get_res:
> + kfree(dd);
> + return rc;
> +}
> +
> +static struct platform_driver pm8058_othc_driver = {
> + .driver = {
> + .name = "pm8058-othc",
> + .owner = THIS_MODULE,
> +#ifdef CONFIG_PM
> + .pm = &pm8058_othc_pm_ops,
> +#endif
> + },
> + .probe = pm8058_othc_probe,
> + .remove = __devexit_p(pm8058_othc_remove),
> +};
> +
> +static int __init pm8058_othc_init(void)
> +{
> + return platform_driver_register(&pm8058_othc_driver);
> +}
> +
> +static void __exit pm8058_othc_exit(void)
> +{
> + platform_driver_unregister(&pm8058_othc_driver);
> +}
> +
> +module_init(pm8058_othc_init);
> +module_exit(pm8058_othc_exit);
> +
> +MODULE_ALIAS("platform:pmic8058_othc");
> +MODULE_DESCRIPTION("PMIC8058 OTHC");
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Anirudh Ghayal <aghayal@xxxxxxxxxxxxxx>");
> diff --git a/include/linux/input/pmic8058-othc.h
> b/include/linux/input/pmic8058-othc.h
> new file mode 100644
> index 0000000..341ac7c
> --- /dev/null
> +++ b/include/linux/input/pmic8058-othc.h
> @@ -0,0 +1,117 @@
> +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
> + * 02110-1301, USA.
> + */
> +
> +#ifndef __PMIC8058_OTHC_H__
> +#define __PMIC8058_OTHC_H__
> +
> +/**
> + * enum othc_micbias_enable - MIC BIAS operational states
> + *
> + * This enum describes the different configurations of the BIAS line.
> + */
> +enum othc_micbias_enable {
> + /* Turn off BIAS */
> + OTHC_SIGNAL_OFF,
> + /* Turn on BIAS if TCXO_EN is high */
> + OTHC_SIGNAL_TCXO,
> + /* Turn on BIAS if TCXO_EN or PWN is high */
> + OTHC_SIGNAL_PWM_TCXO,
> + /* Turn on BIAS always */
> + OTHC_SIGNAL_ALWAYS_ON,
> +};
> +
> +/**
> + * enum othc_headset_type - Different type of supported headset
> + *
> + * This enum describes the different types of supported headsets.
> + */
> +enum othc_headset_type {
> + OTHC_HEADSET_NO,
> + OTHC_HEADSET_NC,
> +};
> +
> +/**
> + * enum othc_micbias - Lists the number of MIC BIAS lines.
> + *
> + * This enum lists all the total number of BIAS lines.
> + */
> +enum othc_micbias {
> + OTHC_MICBIAS_0,
> + OTHC_MICBIAS_1,
> + OTHC_MICBIAS_2,
> + OTHC_MICBIAS_MAX,
> +};
> +
> +/**
> + * enum othc_micbias_capability - Capability of the MIC BIAS line
> + *
> + * This enum describes the capability of the MIC BIAS line, it can either
> be
> + * used for headset or a regular speaker MIC BIAS.
> + */
> +enum othc_micbias_capability {
> + OTHC_MICBIAS,
> + OTHC_MICBIAS_HSED,
> +};
> +
> +/**
> + * struct othc_hsed_config - headset specific configuration structure
> + * @othc_headset: type of headset
> + * @othc_lowcurr_thresh_uA: low current threshold for the headset
> + * @othc_highcurr_thresh_uA: high current threshold for the headset
> + * @othc_hyst_prediv_us: hysterisis time pre-divider
> + * @othc_period_clkdiv_us: pwm period pre-divider
> + * @othc_hyst_clk_us: hysterisis clock period
> + * @othc_hyst_clk_us: hysterisis clock period
> + * @othc_period_clk_us: pwm clock period
> + * @othc_wakeup: wakeup capability
> + * @switch_debounce_ms: specifies the switch debounce time
> + *
> + * This structure provides the configurable parameters for headset. This
> is a
> + * part of the platform data.
> + */
> +struct othc_hsed_config {
> + enum othc_headset_type othc_headset;
> + u16 othc_lowcurr_thresh_uA;
> + u16 othc_highcurr_thresh_uA;
> + u32 othc_hyst_prediv_us;
> + u32 othc_period_clkdiv_us;
> + u32 othc_hyst_clk_us;
> + u32 othc_period_clk_us;
> + int othc_wakeup;
> + unsigned long switch_debounce_ms;
> +};
> +
> +/**
> + * struct pmic8058_othc_config_pdata - platform data for OTHC
> + * @micbias_select: selects the MIC BIAS
> + * @micbias_enable: default operational configuration of the MIC BIAS
> + * @micbias_capability: capability supported by the MIC BIAS
> + * @hsed_config: pointer to headset configuration
> + *
> + * This structure is the platform data provided to the OTHC driver
> + */
> +struct pmic8058_othc_config_pdata {
> + enum othc_micbias micbias_select;
> + enum othc_micbias_enable micbias_enable;
> + enum othc_micbias_capability micbias_capability;
> + struct othc_hsed_config *hsed_config;
> +};
> +
> +int pm8058_micbias_enable(enum othc_micbias micbias,
> + enum othc_micbias_enable enable);
> +
> +#endif /* __PMIC8058_OTHC_H__ */
> --
> 1.7.0.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/