Re: [PATCH] ARM: l2x0: Check the correct address range

[Kanigeri, Hari]

> From: Boojin Kim <boojin.kim@xxxxxxxxxxx>
>
> When flush or clean the 1MiB, it doesn't flush or clean all since it doesn't check the correct address. So Check the correct address range.

I saw this before but then I thought that the individual callers of
cache functions have to call with  +1 to the end address.

>
> Signed-off-by: Boojin Kim <boojin.kim@xxxxxxxxxxx>
> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> ---
> diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
> index 170c9bb..50599d9 100644
> --- a/arch/arm/mm/cache-l2x0.c
> +++ b/arch/arm/mm/cache-l2x0.c
> @@ -195,7 +195,7 @@ static void l2x0_clean_range(unsigned long start, unsigned long end)
>        void __iomem *base = l2x0_base;
>        unsigned long flags;
>
> -       if ((end - start) >= l2x0_size) {
> +       if ((end - start + 1) >= l2x0_size) {

nitpick: probably will look more obvious if it is coded as  if ((end +
1) - start) >= l2x0_size)

>                l2x0_clean_all();
>                return;
>        }
> @@ -225,7 +225,7 @@ static void l2x0_flush_range(unsigned long start, unsigned long end)
>        void __iomem *base = l2x0_base;
>        unsigned long flags;
>
> -       if ((end - start) >= l2x0_size) {
> +       if ((end - start + 1) >= l2x0_size) {

same as above.


Thank you,
Best regards,
Hari Kanigeri
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/