[PATCH 15/62] e1000: Use static const

[Joe Perches]

Using static const generally increases object text and decreases data size.
It also generally decreases overall object size.

   text	   data	    bss	    dec	    hex	filename
  74538	   4296	  19168	  98002	  17ed2	drivers/net/e1000/e1000_hw.o.old
  74501	   4296	  19168	  97965	  17ead	drivers/net/e1000/e1000_hw.o.new

Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
---
 drivers/net/e1000/e1000_hw.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index c7e242b6..c866ef0 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -4892,8 +4892,8 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
 	} else if (hw->phy_type == e1000_phy_igp) {	/* For IGP PHY */
 		u16 cur_agc_value;
 		u16 min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
-		u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
-		    { IGP01E1000_PHY_AGC_A,
+		static const u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = {
+			IGP01E1000_PHY_AGC_A,
 			IGP01E1000_PHY_AGC_B,
 			IGP01E1000_PHY_AGC_C,
 			IGP01E1000_PHY_AGC_D
@@ -5071,8 +5071,8 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
 {
 	s32 ret_val;
 	u16 phy_data, phy_saved_data, speed, duplex, i;
-	u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
-	    { IGP01E1000_PHY_AGC_PARAM_A,
+	static const u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = {
+		IGP01E1000_PHY_AGC_PARAM_A,
 		IGP01E1000_PHY_AGC_PARAM_B,
 		IGP01E1000_PHY_AGC_PARAM_C,
 		IGP01E1000_PHY_AGC_PARAM_D
-- 
1.7.3.2.245.g03276.dirty

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/