Re: [PATCH preliminary] [BLOCK] Preliminary increasing tag sequence implementation

[Luben Tuikov]

--- On Mon, 12/6/10, Luben Tuikov <ltuikov@xxxxxxxxx> wrote:
> Signed-off-by: Luben Tuikov <ltuikov@xxxxxxxxx>
> ---
>  * This is a preliminary patch. Feel free to apply it for
>  inclusion and/or work/modify it to submit a more
>  atomically-correct version.
>  * Vendors: apply this to see an increasing sequence of
> tags
>  on the wire and at your device, so that error recovery
> doesn't
>  abort a task which isn't intended to be aborted especially
> in
>  full duplex protocols when the command status and TMF can
>  cross on the wire. See this thread: http://marc.info/?l=linux-scsi&m=128902337522893&w=2 ;
> 
>  block/blk-tag.c       
> |   15 +++++++++++++--
>  include/linux/blkdev.h |    1 +
>  2 files changed, 14 insertions(+), 2 deletions(-)
> 
> diff --git a/block/blk-tag.c b/block/blk-tag.c
> index ece65fc..f792e98 100644
> --- a/block/blk-tag.c
> +++ b/block/blk-tag.c
> @@ -130,6 +130,7 @@ init_tag_map(struct request_queue *q,
> struct blk_queue_tag *tags, int depth)
>      tags->max_depth = depth;
>      tags->tag_index = tag_index;
>      tags->tag_map = tag_map;
> +    tags->last_tag = 0;
>  
>      return 0;
>  fail:
> @@ -222,7 +223,7 @@ int blk_queue_resize_tags(struct
> request_queue *q, int new_depth)
>      struct blk_queue_tag *bqt =
> q->queue_tags;
>      struct request **tag_index;
>      unsigned long *tag_map;
> -    int max_depth, nr_ulongs;
> +    int max_depth, nr_ulongs, last_tag;
>  
>      if (!bqt)
>          return -ENXIO;
> @@ -251,6 +252,7 @@ int blk_queue_resize_tags(struct
> request_queue *q, int new_depth)
>      tag_index = bqt->tag_index;
>      tag_map = bqt->tag_map;
>      max_depth = bqt->real_max_depth;
> +    last_tag = bqt->last_tag;
>  
>      if (init_tag_map(q, bqt, new_depth))
>          return -ENOMEM;
> @@ -258,6 +260,7 @@ int blk_queue_resize_tags(struct
> request_queue *q, int new_depth)
>      memcpy(bqt->tag_index, tag_index,
> max_depth * sizeof(struct request *));
>      nr_ulongs = ALIGN(max_depth,
> BITS_PER_LONG) / BITS_PER_LONG;
>      memcpy(bqt->tag_map, tag_map,
> nr_ulongs * sizeof(unsigned long));
> +    bqt->last_tag = last_tag;
>  
>      kfree(tag_index);
>      kfree(tag_map);
> @@ -364,12 +367,20 @@ int blk_queue_start_tag(struct
> request_queue *q, struct request *rq)
>             
> return 1;
>      }
>  
> +    if (bqt->last_tag ==
> bqt->max_depth-1)
> +        bqt->last_tag =
> 0;
> +
>      do {
> -        tag =
> find_first_zero_bit(bqt->tag_map, max_depth);
> +        tag =
> find_next_zero_bit(bqt->tag_map,
> +           
>          max_depth,
> +           
>    
>      bqt->last_tag+1);
>          if (tag >=
> max_depth)
>             
> return 1;
>  
>      } while (test_and_set_bit_lock(tag,
> bqt->tag_map));
> +
> +    bqt->last_tag = tag;
> +
>      /*
>       * We need lock ordering
> semantics given by test_and_set_bit_lock.
>       * See blk_queue_end_tag for
> details.
> diff --git a/include/linux/blkdev.h
> b/include/linux/blkdev.h
> index 5027a59..955222e 100644
> --- a/include/linux/blkdev.h
> +++ b/include/linux/blkdev.h
> @@ -224,6 +224,7 @@ struct blk_queue_tag {
>      int max_depth;   
>         /* what we will send
> to device */
>      int real_max_depth;   
>     /* what the array can hold */
>      atomic_t refcnt;   
>     /* map can be shared */
> +    int last_tag;
>  };
>  
>  #define BLK_SCSI_MAX_CMDS    (256)
> -- 
> 1.7.2.2.165.gbc382

A lot of bugs were discovered and are being discovered since this patch was applied. I'm tracking the Linux based ones at the moment as time permits (or at least trying to track them). Some of what I'm seeing is the same tag being issued for the subsequent command after an aborted command, and lookup failures occasionally (these depend on a lot of factors, for example how many LUs the device reports, how many streams are supported, whether the device runs in SS or HS mode, etc).

The purpose of the posting of this patch was to get people to either apply it or come up with a more atomically correct implementation, submit and apply it, so that everyone can 1) have correct sequence of tags on the wire and 2) discover more bugs (if any ;-) ).

Anyone?

   Luben

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/