[PATCHv1 014/211] unicore32: new file arch/unicore32/include/asm/assembler.h

From: Guan Xuetao
Date: Thu Dec 09 2010 - 04:43:27 EST


From: Guan Xuetao <guanxuetao@xxxxxxxxxxxxxxx>

assembler.h include many macros for generic using in unicore32

Signed-off-by: Guan Xuetao <guanxuetao@xxxxxxxxxxxxxxx>
---
arch/unicore32/include/asm/assembler.h | 193
++++++++++++++++++++++++++++++++
1 files changed, 193 insertions(+), 0 deletions(-)

diff --git a/arch/unicore32/include/asm/assembler.h
b/arch/unicore32/include/asm/assembler.h
new file mode 100644
index 0000000..268a4f6
--- /dev/null
+++ b/arch/unicore32/include/asm/assembler.h
@@ -0,0 +1,193 @@
+/*
+ * linux/arch/unicore32/include/asm/assembler.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Do not include any C declarations in this file - it is included by
+ * assembler source.
+ */
+#ifndef __ASSEMBLY__
+#error "Only include this from assembly code"
+#endif
+
+#include <asm/ptrace.h>
+
+/*
+ * Little Endian independent macros for shifting bytes within registers.
+ */
+#define pull >>
+#define push <<
+#define get_byte_0 << #0
+#define get_byte_1 >> #8
+#define get_byte_2 >> #16
+#define get_byte_3 >> #24
+#define put_byte_0 << #0
+#define put_byte_1 << #8
+#define put_byte_2 << #16
+#define put_byte_3 << #24
+
+#define cadd cmpadd
+#define cand cmpand
+#define csub cmpsub
+#define cxor cmpxor
+
+/*
+ * Enable and disable interrupts
+ */
+ .macro disable_irq_notrace, temp
+ mov \temp, asr
+ andn \temp, \temp, #0xFF
+ or \temp, \temp, #PSR_I_BIT | PRIV_MODE
+ mov.a asr, \temp
+ .endm
+
+ .macro enable_irq_notrace, temp
+ mov \temp, asr
+ andn \temp, \temp, #0xFF
+ or \temp, \temp, #PRIV_MODE
+ mov.a asr, \temp
+ .endm
+
+ .macro asm_trace_hardirqs_off
+#if defined(CONFIG_TRACE_IRQFLAGS)
+ stm.w {ip, lr}, [sp-]
+ stm.w {r0-r3}, [sp-]
+ b.l trace_hardirqs_off
+ ldm.w {r0-r3}, [sp]+
+ ldm.w {ip, lr}, [sp]+
+#endif
+ .endm
+
+ .macro asm_trace_hardirqs_on_cond, cond
+#if defined(CONFIG_TRACE_IRQFLAGS)
+ /*
+ * actually the registers should be pushed and pop'd conditionally,
but
+ * after bl the flags are certainly clobbered
+ */
+ stm.w {ip, lr}, [sp-]
+ stm.w {r0-r3}, [sp-]
+ bl\cond trace_hardirqs_on
+ ldm.w {r0-r3}, [sp]+
+ ldm.w {ip, lr}, [sp]+
+#endif
+ .endm
+
+ .macro asm_trace_hardirqs_on
+ asm_trace_hardirqs_on_cond al
+ .endm
+
+ .macro disable_irq, temp
+ disable_irq_notrace \temp
+ asm_trace_hardirqs_off
+ .endm
+
+ .macro enable_irq, temp
+ asm_trace_hardirqs_on
+ enable_irq_notrace \temp
+ .endm
+/*
+ * Save the current IRQ state and disable IRQs. Note that this macro
+ * assumes that the processor is in PRIV mode.
+ */
+ .macro save_and_disable_irqs, oldcpsr, temp
+ mov \oldcpsr, asr
+ disable_irq \temp
+ .endm
+
+/*
+ * Restore interrupt state previously stored in a register. We don't
+ * guarantee that this will preserve the flags.
+ */
+ .macro restore_irqs_notrace, oldcpsr, temp
+ mov \temp, asr
+ mov.a asr, \oldcpsr
+ mov.f asr, \temp
+ .endm
+
+ .macro restore_irqs, oldcpsr, temp
+ cmpand.a \oldcpsr, #PSR_I_BIT
+ asm_trace_hardirqs_on_cond eq
+ restore_irqs_notrace \oldcpsr, \temp
+ .endm
+
+#define USER(x...) \
+9999: x; \
+ .pushsection __ex_table, "a"; \
+ .align 3; \
+ .long 9999b, 9001f; \
+ .popsection
+
+ .macro notcond, cond, nexti = .+8
+ .ifc \cond, eq
+ bne \nexti
+ .else; .ifc \cond, ne
+ beq \nexti
+ .else; .ifc \cond, ea
+ bub \nexti
+ .else; .ifc \cond, ub
+ bea \nexti
+ .else; .ifc \cond, fs
+ bns \nexti
+ .else; .ifc \cond, ns
+ bfs \nexti
+ .else; .ifc \cond, fv
+ bnv \nexti
+ .else; .ifc \cond, nv
+ bfv \nexti
+ .else; .ifc \cond, ua
+ beb \nexti
+ .else; .ifc \cond, eb
+ bua \nexti
+ .else; .ifc \cond, eg
+ bsl \nexti
+ .else; .ifc \cond, sl
+ beg \nexti
+ .else; .ifc \cond, sg
+ bel \nexti
+ .else; .ifc \cond, el
+ bsg \nexti
+ .else; .ifnc \cond, al
+ .error "Unknown cond in notcond macro argument"
+ .endif; .endif; .endif; .endif; .endif; .endif; .endif
+ .endif; .endif; .endif; .endif; .endif; .endif; .endif
+ .endif
+ .endm
+
+ .macro usracc, instr, reg, ptr, inc, cond, rept, abort
+ .rept \rept
+ notcond \cond, .+8
+9999 :
+ .if \inc == 1
+ \instr\()b.u \reg, [\ptr], #\inc
+ .elseif \inc == 4
+ \instr\()w.u \reg, [\ptr], #\inc
+ .else
+ .error "Unsupported inc macro argument"
+ .endif
+
+ .pushsection __ex_table, "a"
+ .align 3
+ .long 9999b, \abort
+ .popsection
+ .endr
+ .endm
+
+ .macro strusr, reg, ptr, inc, cond = al, rept = 1, abort = 9001f
+ usracc st, \reg, \ptr, \inc, \cond, \rept, \abort
+ .endm
+
+ .macro ldrusr, reg, ptr, inc, cond = al, rept = 1, abort = 9001f
+ usracc ld, \reg, \ptr, \inc, \cond, \rept, \abort
+ .endm
+
+ .macro nop8
+ .rept 8
+ nop
+ .endr
+ .endm

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/