[PATCH 1/6 v11] ARM: Add basic architecture support forVIA/WonderMedia 85xx SoC's

From: Alexey Charkov
Date: Wed Dec 22 2010 - 17:25:15 EST

Next message: Liam Girdwood: "Re: [PATCH] regulator: Make regulator_has_full_constraints a bool"
Previous message: Andrew Morton: "Re: [PATCH v3] rtc-cmos: fix suspend/resume"
In reply to: Ryan Mallon: "Re: [PATCH 1/6 v10] ARM: Add basic architecture support for VIA/WonderMedia85xx SoC's"
Next in thread: Ryan Mallon: "Re: [PATCH 1/6 v11] ARM: Add basic architecture support for VIA/WonderMedia85xx SoC's"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This adds support for the family of Systems-on-Chip produced initially
by VIA and now its subsidiary WonderMedia that have recently become
widespread in lower-end Chinese ARM-based tablets and netbooks.

Support is included for both VT8500 and WM8505, selectable by a
configuration switch at kernel build time.

Included are basic machine initialization files, register and
interrupt definitions, support for the on-chip interrupt controller,
high-precision OS timer, GPIO lines, necessary macros for early debug,
pulse-width-modulated outputs control, as well as platform device
configurations for the specific drivers implemented elsewhere.

Signed-off-by: Alexey Charkov <alchark@xxxxxxxxx>
---

This incorporates latest comments by Ryan regarding helper inlines
in devices-{vt8500,wm8505}.c

Best regards,
Alexey

arch/arm/Kconfig | 12 +
arch/arm/Makefile | 1 +
arch/arm/boot/compressed/Makefile | 4 +
arch/arm/boot/compressed/head-vt8500.S | 46 ++++
arch/arm/mach-vt8500/Kconfig | 73 ++++++
arch/arm/mach-vt8500/Makefile | 9 +
arch/arm/mach-vt8500/Makefile.boot | 3 +
arch/arm/mach-vt8500/bv07.c | 77 +++++++
arch/arm/mach-vt8500/devices-vt8500.c | 91 ++++++++
arch/arm/mach-vt8500/devices-wm8505.c | 99 +++++++++
arch/arm/mach-vt8500/devices.c | 270 +++++++++++++++++++++++
arch/arm/mach-vt8500/devices.h | 88 ++++++++
arch/arm/mach-vt8500/gpio.c | 233 +++++++++++++++++++
arch/arm/mach-vt8500/include/mach/debug-macro.S | 31 +++
arch/arm/mach-vt8500/include/mach/entry-macro.S | 32 +++
arch/arm/mach-vt8500/include/mach/gpio.h | 6 +
arch/arm/mach-vt8500/include/mach/hardware.h | 12 +
arch/arm/mach-vt8500/include/mach/i8042.h | 18 ++
arch/arm/mach-vt8500/include/mach/io.h | 28 +++
arch/arm/mach-vt8500/include/mach/irqs.h | 22 ++
arch/arm/mach-vt8500/include/mach/memory.h | 28 +++
arch/arm/mach-vt8500/include/mach/system.h | 18 ++
arch/arm/mach-vt8500/include/mach/timex.h | 26 +++
arch/arm/mach-vt8500/include/mach/uncompress.h | 37 +++
arch/arm/mach-vt8500/include/mach/vmalloc.h | 20 ++
arch/arm/mach-vt8500/include/mach/vt8500_irqs.h | 88 ++++++++
arch/arm/mach-vt8500/include/mach/vt8500_regs.h | 79 +++++++
arch/arm/mach-vt8500/include/mach/vt8500fb.h | 31 +++
arch/arm/mach-vt8500/include/mach/wm8505_irqs.h | 115 ++++++++++
arch/arm/mach-vt8500/include/mach/wm8505_regs.h | 78 +++++++
arch/arm/mach-vt8500/irq.c | 177 +++++++++++++++
arch/arm/mach-vt8500/pwm.c | 265 ++++++++++++++++++++++
arch/arm/mach-vt8500/timer.c | 155 +++++++++++++
arch/arm/mach-vt8500/wm8505_7in.c | 77 +++++++
34 files changed, 2349 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/compressed/head-vt8500.S
create mode 100644 arch/arm/mach-vt8500/Kconfig
create mode 100644 arch/arm/mach-vt8500/Makefile
create mode 100644 arch/arm/mach-vt8500/Makefile.boot
create mode 100644 arch/arm/mach-vt8500/bv07.c
create mode 100644 arch/arm/mach-vt8500/devices-vt8500.c
create mode 100644 arch/arm/mach-vt8500/devices-wm8505.c
create mode 100644 arch/arm/mach-vt8500/devices.c
create mode 100644 arch/arm/mach-vt8500/devices.h
create mode 100644 arch/arm/mach-vt8500/gpio.c
create mode 100644 arch/arm/mach-vt8500/include/mach/debug-macro.S
create mode 100644 arch/arm/mach-vt8500/include/mach/entry-macro.S
create mode 100644 arch/arm/mach-vt8500/include/mach/gpio.h
create mode 100644 arch/arm/mach-vt8500/include/mach/hardware.h
create mode 100644 arch/arm/mach-vt8500/include/mach/i8042.h
create mode 100644 arch/arm/mach-vt8500/include/mach/io.h
create mode 100644 arch/arm/mach-vt8500/include/mach/irqs.h
create mode 100644 arch/arm/mach-vt8500/include/mach/memory.h
create mode 100644 arch/arm/mach-vt8500/include/mach/system.h
create mode 100644 arch/arm/mach-vt8500/include/mach/timex.h
create mode 100644 arch/arm/mach-vt8500/include/mach/uncompress.h
create mode 100644 arch/arm/mach-vt8500/include/mach/vmalloc.h
create mode 100644 arch/arm/mach-vt8500/include/mach/vt8500_irqs.h
create mode 100644 arch/arm/mach-vt8500/include/mach/vt8500_regs.h
create mode 100644 arch/arm/mach-vt8500/include/mach/vt8500fb.h
create mode 100644 arch/arm/mach-vt8500/include/mach/wm8505_irqs.h
create mode 100644 arch/arm/mach-vt8500/include/mach/wm8505_regs.h
create mode 100644 arch/arm/mach-vt8500/irq.c
create mode 100644 arch/arm/mach-vt8500/pwm.c
create mode 100644 arch/arm/mach-vt8500/timer.c
create mode 100644 arch/arm/mach-vt8500/wm8505_7in.c

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d56d21c..53052fa 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -843,6 +843,16 @@ config PLAT_SPEAR
help
Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).

+config ARCH_VT8500
+ bool "VIA/WonderMedia 85xx"
+ select CPU_ARM926T
+ select GENERIC_GPIO
+ select ARCH_HAS_CPUFREQ
+ select GENERIC_CLOCKEVENTS
+ select ARCH_REQUIRE_GPIOLIB
+ select HAVE_PWM
+ help
+ Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
endchoice

#
@@ -973,6 +983,8 @@ source "arch/arm/mach-versatile/Kconfig"

source "arch/arm/mach-vexpress/Kconfig"

+source "arch/arm/mach-vt8500/Kconfig"
+
source "arch/arm/mach-w90x900/Kconfig"

# Definitions to make life easier
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index b87aed0..b0f219a 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -189,6 +189,7 @@ machine-$(CONFIG_ARCH_U300) := u300
machine-$(CONFIG_ARCH_U8500) := ux500
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_VEXPRESS) := vexpress
+machine-$(CONFIG_ARCH_VT8500) := vt8500
machine-$(CONFIG_ARCH_W90X900) := w90x900
machine-$(CONFIG_ARCH_NUC93X) := nuc93x
machine-$(CONFIG_FOOTBRIDGE) := footbridge
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 65a7c1c..62cade4 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -29,6 +29,10 @@ ifeq ($(CONFIG_ARCH_SA1100),y)
OBJS += head-sa1100.o
endif

+ifeq ($(CONFIG_ARCH_VT8500),y)
+OBJS += head-vt8500.o
+endif
+
ifeq ($(CONFIG_CPU_XSCALE),y)
OBJS += head-xscale.o
endif
diff --git a/arch/arm/boot/compressed/head-vt8500.S b/arch/arm/boot/compressed/head-vt8500.S
new file mode 100644
index 0000000..1dc1e21
--- /dev/null
+++ b/arch/arm/boot/compressed/head-vt8500.S
@@ -0,0 +1,46 @@
+/*
+ * linux/arch/arm/boot/compressed/head-vt8500.S
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@xxxxxxxxx>
+ *
+ * VIA VT8500 specific tweaks. This is merged into head.S by the linker.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/mach-types.h>
+
+ .section ".start", "ax"
+
+__VT8500_start:
+ @ Compare the SCC ID register against a list of known values
+ ldr r1, .SCCID
+ ldr r3, [r1]
+
+ @ VT8500 override
+ ldr r4, .VT8500SCC
+ cmp r3, r4
+ ldreq r7, .ID_BV07
+ beq .Lendvt8500
+
+ @ WM8505 override
+ ldr r4, .WM8505SCC
+ cmp r3, r4
+ ldreq r7, .ID_8505
+ beq .Lendvt8500
+
+ @ Otherwise, leave the bootloader's machine id untouched
+
+.SCCID:
+ .word 0xd8120000
+.VT8500SCC:
+ .word 0x34000102
+.WM8505SCC:
+ .word 0x34260103
+
+.ID_BV07:
+ .word MACH_TYPE_BV07
+.ID_8505:
+ .word MACH_TYPE_WM8505_7IN_NETBOOK
+
+.Lendvt8500:
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
new file mode 100644
index 0000000..2c20a34
--- /dev/null
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -0,0 +1,73 @@
+if ARCH_VT8500
+
+config VTWM_VERSION_VT8500
+ bool
+
+config VTWM_VERSION_WM8505
+ bool
+
+config MACH_BV07
+ bool "Benign BV07-8500 Mini Netbook"
+ depends on ARCH_VT8500
+ select VTWM_VERSION_VT8500
+ help
+ Add support for the inexpensive 7-inch netbooks sold by many
+ Chinese distributors under various names. Note that there are
+ many hardware implementations in identical exterior, make sure
+ that yours is indeed based on a VIA VT8500 chip.
+
+config MACH_WM8505_7IN_NETBOOK
+ bool "WM8505 7-inch generic netbook"
+ depends on ARCH_VT8500
+ select VTWM_VERSION_WM8505
+ help
+ Add support for the inexpensive 7-inch netbooks sold by many
+ Chinese distributors under various names. Note that there are
+ many hardware implementations in identical exterior, make sure
+ that yours is indeed based on a WonderMedia WM8505 chip.
+
+comment "LCD panel size"
+
+config WMT_PANEL_800X480
+ bool "7-inch with 800x480 resolution"
+ depends on (FB_VT8500 || FB_WM8505)
+ default y
+ help
+ These are found in most of the netbooks in generic cases, as
+ well as in Eken M001 tablets and possibly elsewhere.
+
+ To select this panel at runtime, say y here and append
+ 'panel=800x480' to your kernel command line. Otherwise, the
+ largest one available will be used.
+
+config WMT_PANEL_800X600
+ bool "8-inch with 800x600 resolution"
+ depends on (FB_VT8500 || FB_WM8505)
+ help
+ These are found in Eken M003 tablets and possibly elsewhere.
+
+ To select this panel at runtime, say y here and append
+ 'panel=800x600' to your kernel command line. Otherwise, the
+ largest one available will be used.
+
+config WMT_PANEL_1024X576
+ bool "10-inch with 1024x576 resolution"
+ depends on (FB_VT8500 || FB_WM8505)
+ help
+ These are found in CherryPal netbooks and possibly elsewhere.
+
+ To select this panel at runtime, say y here and append
+ 'panel=1024x576' to your kernel command line. Otherwise, the
+ largest one available will be used.
+
+config WMT_PANEL_1024X600
+ bool "10-inch with 1024x600 resolution"
+ depends on (FB_VT8500 || FB_WM8505)
+ help
+ These are found in Eken M006 tablets and possibly elsewhere.
+
+ To select this panel at runtime, say y here and append
+ 'panel=1024x600' to your kernel command line. Otherwise, the
+ largest one available will be used.
+
+endif
diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile
new file mode 100644
index 0000000..81aedb7
--- /dev/null
+++ b/arch/arm/mach-vt8500/Makefile
@@ -0,0 +1,9 @@
+obj-y += devices.o gpio.o irq.o timer.o
+
+obj-$(CONFIG_VTWM_VERSION_VT8500) += devices-vt8500.o
+obj-$(CONFIG_VTWM_VERSION_WM8505) += devices-wm8505.o
+
+obj-$(CONFIG_MACH_BV07) += bv07.o
+obj-$(CONFIG_MACH_WM8505_7IN_NETBOOK) += wm8505_7in.o
+
+obj-$(CONFIG_HAVE_PWM) += pwm.o
diff --git a/arch/arm/mach-vt8500/Makefile.boot b/arch/arm/mach-vt8500/Makefile.boot
new file mode 100644
index 0000000..a8acc4e
--- /dev/null
+++ b/arch/arm/mach-vt8500/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x01000000
diff --git a/arch/arm/mach-vt8500/bv07.c b/arch/arm/mach-vt8500/bv07.c
new file mode 100644
index 0000000..94a261d
--- /dev/null
+++ b/arch/arm/mach-vt8500/bv07.c
@@ -0,0 +1,77 @@
+/*
+ * arch/arm/mach-vt8500/bv07.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/io.h>
+#include <linux/pm.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "devices.h"
+
+static void __iomem *pmc_hiber;
+
+static struct platform_device *devices[] __initdata = {
+ &vt8500_device_uart0,
+ &vt8500_device_lcdc,
+ &vt8500_device_ehci,
+ &vt8500_device_ge_rops,
+ &vt8500_device_pwm,
+ &vt8500_device_pwmbl,
+ &vt8500_device_rtc,
+};
+
+static void vt8500_power_off(void)
+{
+ local_irq_disable();
+ writew(5, pmc_hiber);
+ asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0));
+}
+
+void __init bv07_init(void)
+{
+#ifdef CONFIG_FB_VT8500
+ void __iomem *gpio_mux_reg = ioremap(wmt_gpio_base + 0x200, 4);
+ if (gpio_mux_reg) {
+ writel(readl(gpio_mux_reg) | 1, gpio_mux_reg);
+ iounmap(gpio_mux_reg);
+ } else {
+ printk(KERN_ERR "Could not remap the GPIO mux register, display may not work properly!\n");
+ }
+#endif
+ pmc_hiber = ioremap(wmt_pmc_base + 0x12, 2);
+ if (pmc_hiber)
+ pm_power_off = &vt8500_power_off;
+ else
+ printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n");
+
+ vt8500_set_resources();
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ vt8500_gpio_init();
+}
+
+MACHINE_START(BV07, "Benign BV07 Mini Netbook")
+ .boot_params = 0x00000100,
+ .reserve = vt8500_reserve_mem,
+ .map_io = vt8500_map_io,
+ .init_irq = vt8500_init_irq,
+ .timer = &vt8500_timer,
+ .init_machine = bv07_init,
+MACHINE_END
diff --git a/arch/arm/mach-vt8500/devices-vt8500.c b/arch/arm/mach-vt8500/devices-vt8500.c
new file mode 100644
index 0000000..19519ae
--- /dev/null
+++ b/arch/arm/mach-vt8500/devices-vt8500.c
@@ -0,0 +1,91 @@
+/* linux/arch/arm/mach-vt8500/devices-vt8500.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@xxxxxxxxx>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+
+#include <mach/vt8500_regs.h>
+#include <mach/vt8500_irqs.h>
+#include <mach/i8042.h>
+#include "devices.h"
+
+void __init vt8500_set_resources(void)
+{
+ struct resource tmp[3];
+
+ tmp[0] = wmt_mmio_res(VT8500_LCDC_BASE, SZ_1K);
+ tmp[1] = wmt_irq_res(IRQ_LCDC);
+ wmt_res_add(&vt8500_device_lcdc, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(VT8500_UART0_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART0);
+ wmt_res_add(&vt8500_device_uart0, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(VT8500_UART1_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART1);
+ wmt_res_add(&vt8500_device_uart1, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(VT8500_UART2_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART2);
+ wmt_res_add(&vt8500_device_uart2, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(VT8500_UART3_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART3);
+ wmt_res_add(&vt8500_device_uart3, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(VT8500_EHCI_BASE, SZ_512);
+ tmp[1] = wmt_irq_res(IRQ_EHCI);
+ wmt_res_add(&vt8500_device_ehci, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(VT8500_GEGEA_BASE, SZ_256);
+ wmt_res_add(&vt8500_device_ge_rops, tmp, 1);
+
+ tmp[0] = wmt_mmio_res(VT8500_PWM_BASE, 0x44);
+ wmt_res_add(&vt8500_device_pwm, tmp, 1);
+
+ tmp[0] = wmt_mmio_res(VT8500_RTC_BASE, 0x2c);
+ tmp[1] = wmt_irq_res(IRQ_RTC);
+ tmp[2] = wmt_irq_res(IRQ_RTCSM);
+ wmt_res_add(&vt8500_device_rtc, tmp, 3);
+}
+
+static void __init vt8500_set_externs(void)
+{
+ /* Non-resource-aware stuff */
+ wmt_ic_base = VT8500_IC_BASE;
+ wmt_gpio_base = VT8500_GPIO_BASE;
+ wmt_pmc_base = VT8500_PMC_BASE;
+ wmt_i8042_base = VT8500_PS2_BASE;
+
+ wmt_nr_irqs = VT8500_NR_IRQS;
+ wmt_timer_irq = IRQ_PMCOS0;
+ wmt_gpio_ext_irq[0] = IRQ_EXT0;
+ wmt_gpio_ext_irq[1] = IRQ_EXT1;
+ wmt_gpio_ext_irq[2] = IRQ_EXT2;
+ wmt_gpio_ext_irq[3] = IRQ_EXT3;
+ wmt_gpio_ext_irq[4] = IRQ_EXT4;
+ wmt_gpio_ext_irq[5] = IRQ_EXT5;
+ wmt_gpio_ext_irq[6] = IRQ_EXT6;
+ wmt_gpio_ext_irq[7] = IRQ_EXT7;
+ wmt_i8042_kbd_irq = IRQ_PS2KBD;
+ wmt_i8042_aux_irq = IRQ_PS2MOUSE;
+}
+
+void __init vt8500_map_io(void)
+{
+ iotable_init(wmt_io_desc, ARRAY_SIZE(wmt_io_desc));
+
+ /* Should be done before interrupts and timers are initialized */
+ vt8500_set_externs();
+}
diff --git a/arch/arm/mach-vt8500/devices-wm8505.c b/arch/arm/mach-vt8500/devices-wm8505.c
new file mode 100644
index 0000000..db4594e
--- /dev/null
+++ b/arch/arm/mach-vt8500/devices-wm8505.c
@@ -0,0 +1,99 @@
+/* linux/arch/arm/mach-vt8500/devices-wm8505.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@xxxxxxxxx>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+
+#include <mach/wm8505_regs.h>
+#include <mach/wm8505_irqs.h>
+#include <mach/i8042.h>
+#include "devices.h"
+
+void __init wm8505_set_resources(void)
+{
+ struct resource tmp[3];
+
+ tmp[0] = wmt_mmio_res(WM8505_GOVR_BASE, SZ_512);
+ wmt_res_add(&vt8500_device_wm8505_fb, tmp, 1);
+
+ tmp[0] = wmt_mmio_res(WM8505_UART0_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART0);
+ wmt_res_add(&vt8500_device_uart0, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_UART1_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART1);
+ wmt_res_add(&vt8500_device_uart1, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_UART2_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART2);
+ wmt_res_add(&vt8500_device_uart2, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_UART3_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART3);
+ wmt_res_add(&vt8500_device_uart3, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_UART4_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART4);
+ wmt_res_add(&vt8500_device_uart4, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_UART5_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART5);
+ wmt_res_add(&vt8500_device_uart5, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_EHCI_BASE, SZ_512);
+ tmp[1] = wmt_irq_res(IRQ_EHCI);
+ wmt_res_add(&vt8500_device_ehci, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_GEGEA_BASE, SZ_256);
+ wmt_res_add(&vt8500_device_ge_rops, tmp, 1);
+
+ tmp[0] = wmt_mmio_res(WM8505_PWM_BASE, 0x44);
+ wmt_res_add(&vt8500_device_pwm, tmp, 1);
+
+ tmp[0] = wmt_mmio_res(WM8505_RTC_BASE, 0x2c);
+ tmp[1] = wmt_irq_res(IRQ_RTC);
+ tmp[2] = wmt_irq_res(IRQ_RTCSM);
+ wmt_res_add(&vt8500_device_rtc, tmp, 3);
+}
+
+static void __init wm8505_set_externs(void)
+{
+ /* Non-resource-aware stuff */
+ wmt_ic_base = WM8505_IC_BASE;
+ wmt_sic_base = WM8505_SIC_BASE;
+ wmt_gpio_base = WM8505_GPIO_BASE;
+ wmt_pmc_base = WM8505_PMC_BASE;
+ wmt_i8042_base = WM8505_PS2_BASE;
+
+ wmt_nr_irqs = WM8505_NR_IRQS;
+ wmt_timer_irq = IRQ_PMCOS0;
+ wmt_gpio_ext_irq[0] = IRQ_EXT0;
+ wmt_gpio_ext_irq[1] = IRQ_EXT1;
+ wmt_gpio_ext_irq[2] = IRQ_EXT2;
+ wmt_gpio_ext_irq[3] = IRQ_EXT3;
+ wmt_gpio_ext_irq[4] = IRQ_EXT4;
+ wmt_gpio_ext_irq[5] = IRQ_EXT5;
+ wmt_gpio_ext_irq[6] = IRQ_EXT6;
+ wmt_gpio_ext_irq[7] = IRQ_EXT7;
+ wmt_i8042_kbd_irq = IRQ_PS2KBD;
+ wmt_i8042_aux_irq = IRQ_PS2MOUSE;
+}
+
+void __init wm8505_map_io(void)
+{
+ iotable_init(wmt_io_desc, ARRAY_SIZE(wmt_io_desc));
+
+ /* Should be done before interrupts and timers are initialized */
+ wm8505_set_externs();
+}
diff --git a/arch/arm/mach-vt8500/devices.c b/arch/arm/mach-vt8500/devices.c
new file mode 100644
index 0000000..1fcdc36
--- /dev/null
+++ b/arch/arm/mach-vt8500/devices.c
@@ -0,0 +1,270 @@
+/* linux/arch/arm/mach-vt8500/devices.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@xxxxxxxxx>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/memblock.h>
+
+#include <asm/mach/arch.h>
+
+#include <mach/vt8500fb.h>
+#include <mach/i8042.h>
+#include "devices.h"
+
+/* These can't use resources currently */
+unsigned long wmt_ic_base __initdata;
+unsigned long wmt_sic_base __initdata;
+unsigned long wmt_gpio_base __initdata;
+unsigned long wmt_pmc_base __initdata;
+unsigned long wmt_i8042_base __initdata;
+
+int wmt_nr_irqs __initdata;
+int wmt_timer_irq __initdata;
+int wmt_gpio_ext_irq[8] __initdata;
+
+/* Should remain accessible after init.
+ * i8042 driver desperately calls for attention...
+ */
+int wmt_i8042_kbd_irq;
+int wmt_i8042_aux_irq;
+
+static u64 fb_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device vt8500_device_lcdc = {
+ .name = "vt8500-lcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = &fb_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+struct platform_device vt8500_device_wm8505_fb = {
+ .name = "wm8505-fb",
+ .id = 0,
+};
+
+/* Smallest to largest */
+static struct vt8500fb_platform_data panels[] = {
+#ifdef CONFIG_WMT_PANEL_800X480
+{
+ .xres_virtual = 800,
+ .yres_virtual = 480 * 2,
+ .mode = {
+ .name = "800x480",
+ .xres = 800,
+ .yres = 480,
+ .left_margin = 88,
+ .right_margin = 40,
+ .upper_margin = 32,
+ .lower_margin = 11,
+ .hsync_len = 0,
+ .vsync_len = 1,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+},
+#endif
+#ifdef CONFIG_WMT_PANEL_800X600
+{
+ .xres_virtual = 800,
+ .yres_virtual = 600 * 2,
+ .mode = {
+ .name = "800x600",
+ .xres = 800,
+ .yres = 600,
+ .left_margin = 88,
+ .right_margin = 40,
+ .upper_margin = 32,
+ .lower_margin = 11,
+ .hsync_len = 0,
+ .vsync_len = 1,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+},
+#endif
+#ifdef CONFIG_WMT_PANEL_1024X576
+{
+ .xres_virtual = 1024,
+ .yres_virtual = 576 * 2,
+ .mode = {
+ .name = "1024x576",
+ .xres = 1024,
+ .yres = 576,
+ .left_margin = 40,
+ .right_margin = 24,
+ .upper_margin = 32,
+ .lower_margin = 11,
+ .hsync_len = 96,
+ .vsync_len = 2,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+},
+#endif
+#ifdef CONFIG_WMT_PANEL_1024X600
+{
+ .xres_virtual = 1024,
+ .yres_virtual = 600 * 2,
+ .mode = {
+ .name = "1024x600",
+ .xres = 1024,
+ .yres = 600,
+ .left_margin = 66,
+ .right_margin = 2,
+ .upper_margin = 19,
+ .lower_margin = 1,
+ .hsync_len = 23,
+ .vsync_len = 8,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+},
+#endif
+};
+
+static int current_panel_idx __initdata = ARRAY_SIZE(panels) - 1;
+
+static int __init panel_setup(char *str)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(panels); i++) {
+ if (strcmp(panels[i].mode.name, str) == 0) {
+ current_panel_idx = i;
+ break;
+ }
+ }
+ return 0;
+}
+
+early_param("panel", panel_setup);
+
+static inline void preallocate_fb(struct vt8500fb_platform_data *p,
+ unsigned long align) {
+ p->video_mem_len = (p->xres_virtual * p->yres_virtual * 4) >>
+ (p->bpp > 16 ? 0 : (p->bpp > 8 ? 1 :
+ (8 / p->bpp) + 1));
+ p->video_mem_phys = (unsigned long)memblock_alloc(p->video_mem_len,
+ align);
+ p->video_mem_virt = phys_to_virt(p->video_mem_phys);
+}
+
+struct platform_device vt8500_device_uart0 = {
+ .name = "vt8500_serial",
+ .id = 0,
+};
+
+struct platform_device vt8500_device_uart1 = {
+ .name = "vt8500_serial",
+ .id = 1,
+};
+
+struct platform_device vt8500_device_uart2 = {
+ .name = "vt8500_serial",
+ .id = 2,
+};
+
+struct platform_device vt8500_device_uart3 = {
+ .name = "vt8500_serial",
+ .id = 3,
+};
+
+struct platform_device vt8500_device_uart4 = {
+ .name = "vt8500_serial",
+ .id = 4,
+};
+
+struct platform_device vt8500_device_uart5 = {
+ .name = "vt8500_serial",
+ .id = 5,
+};
+
+static u64 ehci_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device vt8500_device_ehci = {
+ .name = "vt8500-ehci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ehci_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+struct platform_device vt8500_device_ge_rops = {
+ .name = "wmt_ge_rops",
+ .id = -1,
+};
+
+struct platform_device vt8500_device_pwm = {
+ .name = "vt8500-pwm",
+ .id = 0,
+};
+
+static struct platform_pwm_backlight_data vt8500_pwmbl_data = {
+ .pwm_id = 0,
+ .max_brightness = 128,
+ .dft_brightness = 70,
+ .pwm_period_ns = 250000, /* revisit when clocks are implemented */
+};
+
+struct platform_device vt8500_device_pwmbl = {
+ .name = "pwm-backlight",
+ .id = 0,
+ .dev = {
+ .platform_data = &vt8500_pwmbl_data,
+ },
+};
+
+struct platform_device vt8500_device_rtc = {
+ .name = "vt8500-rtc",
+ .id = 0,
+};
+
+struct map_desc wmt_io_desc[] __initdata = {
+ /* SoC MMIO registers */
+ [0] = {
+ .virtual = 0xf8000000,
+ .pfn = __phys_to_pfn(0xd8000000),
+ .length = 0x00390000, /* max of all chip variants */
+ .type = MT_DEVICE
+ },
+ /* PCI I/O space, numbers tied to those in <mach/io.h> */
+ [1] = {
+ .virtual = 0xf0000000,
+ .pfn = __phys_to_pfn(0xc0000000),
+ .length = SZ_64K,
+ .type = MT_DEVICE
+ },
+};
+
+void __init vt8500_reserve_mem(void)
+{
+#ifdef CONFIG_FB_VT8500
+ panels[current_panel_idx].bpp = 16; /* Always use RGB565 */
+ preallocate_fb(&panels[current_panel_idx], SZ_4M);
+ vt8500_device_lcdc.dev.platform_data = &panels[current_panel_idx];
+#endif
+}
+
+void __init wm8505_reserve_mem(void)
+{
+#if defined CONFIG_FB_WM8505
+ panels[current_panel_idx].bpp = 32; /* Always use RGB888 */
+ preallocate_fb(&panels[current_panel_idx], 32);
+ vt8500_device_wm8505_fb.dev.platform_data = &panels[current_panel_idx];
+#endif
+}
diff --git a/arch/arm/mach-vt8500/devices.h b/arch/arm/mach-vt8500/devices.h
new file mode 100644
index 0000000..188d4e1
--- /dev/null
+++ b/arch/arm/mach-vt8500/devices.h
@@ -0,0 +1,88 @@
+/* linux/arch/arm/mach-vt8500/devices.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@xxxxxxxxx>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ARCH_ARM_MACH_VT8500_DEVICES_H
+#define __ARCH_ARM_MACH_VT8500_DEVICES_H
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+
+void __init vt8500_init_irq(void);
+void __init wm8505_init_irq(void);
+void __init vt8500_map_io(void);
+void __init wm8505_map_io(void);
+void __init vt8500_reserve_mem(void);
+void __init wm8505_reserve_mem(void);
+void __init vt8500_gpio_init(void);
+void __init vt8500_set_resources(void);
+void __init wm8505_set_resources(void);
+
+extern unsigned long wmt_ic_base __initdata;
+extern unsigned long wmt_sic_base __initdata;
+extern unsigned long wmt_gpio_base __initdata;
+extern unsigned long wmt_pmc_base __initdata;
+
+extern int wmt_nr_irqs __initdata;
+extern int wmt_timer_irq __initdata;
+extern int wmt_gpio_ext_irq[8] __initdata;
+
+extern struct map_desc wmt_io_desc[2] __initdata;
+
+static inline struct resource wmt_mmio_res(u32 start, u32 size)
+{
+ struct resource tmp = {
+ .flags = IORESOURCE_MEM,
+ .start = start,
+ .end = start + size - 1,
+ };
+
+ return tmp;
+}
+
+static inline struct resource wmt_irq_res(int irq)
+{
+ struct resource tmp = {
+ .flags = IORESOURCE_IRQ,
+ .start = irq,
+ .end = irq,
+ };
+
+ return tmp;
+}
+
+static inline void wmt_res_add(struct platform_device *pdev,
+ const struct resource *res, unsigned int num)
+{
+ if (unlikely(platform_device_add_resources(pdev, res, num)))
+ pr_err("Failed to assign resources\n");
+}
+
+extern struct sys_timer vt8500_timer;
+
+extern struct platform_device vt8500_device_uart0;
+extern struct platform_device vt8500_device_uart1;
+extern struct platform_device vt8500_device_uart2;
+extern struct platform_device vt8500_device_uart3;
+extern struct platform_device vt8500_device_uart4;
+extern struct platform_device vt8500_device_uart5;
+
+extern struct platform_device vt8500_device_lcdc;
+extern struct platform_device vt8500_device_wm8505_fb;
+extern struct platform_device vt8500_device_ehci;
+extern struct platform_device vt8500_device_ge_rops;
+extern struct platform_device vt8500_device_pwm;
+extern struct platform_device vt8500_device_pwmbl;
+extern struct platform_device vt8500_device_rtc;
+#endif
diff --git a/arch/arm/mach-vt8500/gpio.c b/arch/arm/mach-vt8500/gpio.c
new file mode 100644
index 0000000..445397e
--- /dev/null
+++ b/arch/arm/mach-vt8500/gpio.c
@@ -0,0 +1,233 @@
+/* linux/arch/arm/mach-vt8500/gpio.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@xxxxxxxxx>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include "devices.h"
+
+#define to_vt8500(__chip) container_of(__chip, struct vt8500_gpio_chip, chip)
+
+static void __iomem *regbase;
+
+struct vt8500_gpio_chip {
+ struct gpio_chip chip;
+ unsigned int shift;
+ unsigned int regoff;
+};
+
+static int gpio_to_irq_map[8];
+
+static int vt8500_muxed_gpio_request(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+ unsigned val = readl(regbase + vt8500_chip->regoff);
+
+ val |= (1 << vt8500_chip->shift << offset);
+ writel(val, regbase + vt8500_chip->regoff);
+
+ return 0;
+}
+
+static void vt8500_muxed_gpio_free(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+ unsigned val = readl(regbase + vt8500_chip->regoff);
+
+ val &= ~(1 << vt8500_chip->shift << offset);
+ writel(val, regbase + vt8500_chip->regoff);
+}
+
+static int vt8500_muxed_gpio_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+ unsigned val = readl(regbase + 0x20 + vt8500_chip->regoff);
+
+ val &= ~(1 << vt8500_chip->shift << offset);
+ writel(val, regbase + 0x20 + vt8500_chip->regoff);
+
+ return 0;
+}
+
+static int vt8500_muxed_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+ unsigned val = readl(regbase + 0x20 + vt8500_chip->regoff);
+
+ val |= (1 << vt8500_chip->shift << offset);
+ writel(val, regbase + 0x20 + vt8500_chip->regoff);
+
+ if (value) {
+ val = readl(regbase + 0x40 + vt8500_chip->regoff);
+ val |= (1 << vt8500_chip->shift << offset);
+ writel(val, regbase + 0x40 + vt8500_chip->regoff);
+ }
+ return 0;
+}
+
+static int vt8500_muxed_gpio_get_value(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+
+ return (readl(regbase + 0x60 + vt8500_chip->regoff)
+ >> vt8500_chip->shift >> offset) & 1;
+}
+
+static void vt8500_muxed_gpio_set_value(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+ unsigned val = readl(regbase + 0x40 + vt8500_chip->regoff);
+
+ if (value)
+ val |= (1 << vt8500_chip->shift << offset);
+ else
+ val &= ~(1 << vt8500_chip->shift << offset);
+
+ writel(val, regbase + 0x40 + vt8500_chip->regoff);
+}
+
+#define VT8500_GPIO_BANK(__name, __shift, __off, __base, __num) \
+{ \
+ .chip = { \
+ .label = __name, \
+ .request = vt8500_muxed_gpio_request, \
+ .free = vt8500_muxed_gpio_free, \
+ .direction_input = vt8500_muxed_gpio_direction_input, \
+ .direction_output = vt8500_muxed_gpio_direction_output, \
+ .get = vt8500_muxed_gpio_get_value, \
+ .set = vt8500_muxed_gpio_set_value, \
+ .can_sleep = 0, \
+ .base = __base, \
+ .ngpio = __num, \
+ }, \
+ .shift = __shift, \
+ .regoff = __off, \
+}
+
+static struct vt8500_gpio_chip vt8500_muxed_gpios[] = {
+ VT8500_GPIO_BANK("uart0", 0, 0x0, 8, 4),
+ VT8500_GPIO_BANK("uart1", 4, 0x0, 12, 4),
+ VT8500_GPIO_BANK("spi0", 8, 0x0, 16, 4),
+ VT8500_GPIO_BANK("spi1", 12, 0x0, 20, 4),
+ VT8500_GPIO_BANK("spi2", 16, 0x0, 24, 4),
+ VT8500_GPIO_BANK("pwmout", 24, 0x0, 28, 2),
+
+ VT8500_GPIO_BANK("sdmmc", 0, 0x4, 30, 11),
+ VT8500_GPIO_BANK("ms", 16, 0x4, 41, 7),
+ VT8500_GPIO_BANK("i2c0", 24, 0x4, 48, 2),
+ VT8500_GPIO_BANK("i2c1", 26, 0x4, 50, 2),
+
+ VT8500_GPIO_BANK("mii", 0, 0x8, 52, 20),
+ VT8500_GPIO_BANK("see", 20, 0x8, 72, 4),
+ VT8500_GPIO_BANK("ide", 24, 0x8, 76, 7),
+
+ VT8500_GPIO_BANK("ccir", 0, 0xc, 83, 19),
+
+ VT8500_GPIO_BANK("ts", 8, 0x10, 102, 11),
+
+ VT8500_GPIO_BANK("lcd", 0, 0x14, 113, 23),
+};
+
+static int vt8500_gpio_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ unsigned val = readl(regbase + 0x3c);
+
+ val &= ~(1 << offset);
+ writel(val, regbase + 0x3c);
+ return 0;
+}
+
+static int vt8500_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ unsigned val = readl(regbase + 0x3c);
+
+ val |= (1 << offset);
+ writel(val, regbase + 0x3c);
+
+ if (value) {
+ val = readl(regbase + 0x5c);
+ val |= (1 << offset);
+ writel(val, regbase + 0x5c);
+ }
+ return 0;
+}
+
+static int vt8500_gpio_get_value(struct gpio_chip *chip,
+ unsigned offset)
+{
+ return (readl(regbase + 0x7c) >> offset) & 1;
+}
+
+static void vt8500_gpio_set_value(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ unsigned val = readl(regbase + 0x5c);
+
+ if (value)
+ val |= (1 << offset);
+ else
+ val &= ~(1 << offset);
+
+ writel(val, regbase + 0x5c);
+}
+
+static int vt8500_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ if (offset > 7)
+ return -EINVAL;
+
+ return gpio_to_irq_map[offset];
+}
+
+static struct gpio_chip vt8500_external_gpios = {
+ .label = "extgpio",
+ .direction_input = vt8500_gpio_direction_input,
+ .direction_output = vt8500_gpio_direction_output,
+ .get = vt8500_gpio_get_value,
+ .set = vt8500_gpio_set_value,
+ .to_irq = vt8500_gpio_to_irq,
+ .can_sleep = 0,
+ .base = 0,
+ .ngpio = 8,
+};
+
+void __init vt8500_gpio_init(void)
+{
+ int i;
+
+ for (i = 0; i < 8; i++)
+ gpio_to_irq_map[i] = wmt_gpio_ext_irq[i];
+
+ regbase = ioremap(wmt_gpio_base, SZ_64K);
+ if (!regbase) {
+ printk(KERN_ERR "Failed to map MMIO registers for GPIO\n");
+ return;
+ }
+
+ gpiochip_add(&vt8500_external_gpios);
+
+ for (i = 0; i < ARRAY_SIZE(vt8500_muxed_gpios); i++)
+ gpiochip_add(&vt8500_muxed_gpios[i].chip);
+}
diff --git a/arch/arm/mach-vt8500/include/mach/debug-macro.S b/arch/arm/mach-vt8500/include/mach/debug-macro.S
new file mode 100644
index 0000000..f119162
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/debug-macro.S
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/debug-macro.S
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@xxxxxxxxx>
+ *
+ * Debugging macro include header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+ .macro addruart, rp, rv
+ mov \rp, #0x00200000
+ orr \rv, \rp, #0xf8000000
+ orr \rp, \rp, #0xd8000000
+ .endm
+
+ .macro senduart,rd,rx
+ strb \rd, [\rx, #0]
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #0x1c]
+ ands \rd, \rd, #0x2
+ bne 1001b
+ .endm
+
+ .macro waituart,rd,rx
+ .endm
diff --git a/arch/arm/mach-vt8500/include/mach/entry-macro.S b/arch/arm/mach-vt8500/include/mach/entry-macro.S
new file mode 100644
index 0000000..92684c7
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for VIA VT8500
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ @ physical 0xd8140000 is virtual 0xf8140000
+ mov \base, #0xf8000000
+ orr \base, \base, #0x00140000
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqnr, [\base]
+ cmp \irqnr, #63 @ may be false positive, check interrupt status
+ bne 1001f
+ ldr \irqstat, [\base, #0x84]
+ ands \irqstat, #0x80000000
+ moveq \irqnr, #0
+1001:
+ .endm
+
diff --git a/arch/arm/mach-vt8500/include/mach/gpio.h b/arch/arm/mach-vt8500/include/mach/gpio.h
new file mode 100644
index 0000000..94ff276
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/gpio.h
@@ -0,0 +1,6 @@
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
diff --git a/arch/arm/mach-vt8500/include/mach/hardware.h b/arch/arm/mach-vt8500/include/mach/hardware.h
new file mode 100644
index 0000000..db4163f
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/hardware.h
@@ -0,0 +1,12 @@
+/* arch/arm/mach-vt8500/include/mach/hardware.h
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
diff --git a/arch/arm/mach-vt8500/include/mach/i8042.h b/arch/arm/mach-vt8500/include/mach/i8042.h
new file mode 100644
index 0000000..cd7143c
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/i8042.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-vt8500/include/mach/i8042.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@xxxxxxxxx>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+extern unsigned long wmt_i8042_base __initdata;
+extern int wmt_i8042_kbd_irq;
+extern int wmt_i8042_aux_irq;
diff --git a/arch/arm/mach-vt8500/include/mach/io.h b/arch/arm/mach-vt8500/include/mach/io.h
new file mode 100644
index 0000000..9077239
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/io.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/io.h
+ *
+ * Copyright (C) 2010 Alexey Charkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffff
+
+#define __io(a) __typesafe_io((a) + 0xf0000000)
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-vt8500/include/mach/irqs.h b/arch/arm/mach-vt8500/include/mach/irqs.h
new file mode 100644
index 0000000..a129fd1
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/irqs.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/irqs.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* This value is just to make the core happy, never used otherwise */
+#define NR_IRQS 128
diff --git a/arch/arm/mach-vt8500/include/mach/memory.h b/arch/arm/mach-vt8500/include/mach/memory.h
new file mode 100644
index 0000000..175f914
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/memory.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/memory.h
+ *
+ * Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-vt8500/include/mach/system.h b/arch/arm/mach-vt8500/include/mach/system.h
new file mode 100644
index 0000000..d6c757e
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/system.h
@@ -0,0 +1,18 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/system.h
+ *
+ */
+#include <asm/io.h>
+
+/* PM Software Reset request register */
+#define VT8500_PMSR_VIRT 0xf8130060
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+ writel(1, VT8500_PMSR_VIRT);
+}
diff --git a/arch/arm/mach-vt8500/include/mach/timex.h b/arch/arm/mach-vt8500/include/mach/timex.h
new file mode 100644
index 0000000..8487e4c
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/timex.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/timex.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef MACH_TIMEX_H
+#define MACH_TIMEX_H
+
+#define CLOCK_TICK_RATE (3000000)
+
+#endif /* MACH_TIMEX_H */
diff --git a/arch/arm/mach-vt8500/include/mach/uncompress.h b/arch/arm/mach-vt8500/include/mach/uncompress.h
new file mode 100644
index 0000000..bb9e2d2
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/* arch/arm/mach-vt8500/include/mach/uncompress.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@xxxxxxxxx>
+ *
+ * Based on arch/arm/mach-dove/include/mach/uncompress.h
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define UART0_PHYS 0xd8200000
+#include <asm/io.h>
+
+static void putc(const char c)
+{
+ while (readb(UART0_PHYS + 0x1c) & 0x2)
+ /* Tx busy, wait and poll */;
+
+ writeb(c, UART0_PHYS);
+}
+
+static void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-vt8500/include/mach/vmalloc.h b/arch/arm/mach-vt8500/include/mach/vmalloc.h
new file mode 100644
index 0000000..4642290
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define VMALLOC_END 0xd0000000UL
diff --git a/arch/arm/mach-vt8500/include/mach/vt8500_irqs.h b/arch/arm/mach-vt8500/include/mach/vt8500_irqs.h
new file mode 100644
index 0000000..ecfee91
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/vt8500_irqs.h
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/vt8500_irqs.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* VT8500 Interrupt Sources */
+
+#define IRQ_JPEGENC 0 /* JPEG Encoder */
+#define IRQ_JPEGDEC 1 /* JPEG Decoder */
+ /* Reserved */
+#define IRQ_PATA 3 /* PATA Controller */
+ /* Reserved */
+#define IRQ_DMA 5 /* DMA Controller */
+#define IRQ_EXT0 6 /* External Interrupt 0 */
+#define IRQ_EXT1 7 /* External Interrupt 1 */
+#define IRQ_GE 8 /* Graphic Engine */
+#define IRQ_GOV 9 /* Graphic Overlay Engine */
+#define IRQ_ETHER 10 /* Ethernet MAC */
+#define IRQ_MPEGTS 11 /* Transport Stream Interface */
+#define IRQ_LCDC 12 /* LCD Controller */
+#define IRQ_EXT2 13 /* External Interrupt 2 */
+#define IRQ_EXT3 14 /* External Interrupt 3 */
+#define IRQ_EXT4 15 /* External Interrupt 4 */
+#define IRQ_CIPHER 16 /* Cipher */
+#define IRQ_VPP 17 /* Video Post-Processor */
+#define IRQ_I2C1 18 /* I2C 1 */
+#define IRQ_I2C0 19 /* I2C 0 */
+#define IRQ_SDMMC 20 /* SD/MMC Controller */
+#define IRQ_SDMMC_DMA 21 /* SD/MMC Controller DMA */
+#define IRQ_PMC_WU 22 /* Power Management Controller Wakeup */
+ /* Reserved */
+#define IRQ_SPI0 24 /* SPI 0 */
+#define IRQ_SPI1 25 /* SPI 1 */
+#define IRQ_SPI2 26 /* SPI 2 */
+#define IRQ_LCDDF 27 /* LCD Data Formatter */
+#define IRQ_NAND 28 /* NAND Flash Controller */
+#define IRQ_NAND_DMA 29 /* NAND Flash Controller DMA */
+#define IRQ_MS 30 /* MemoryStick Controller */
+#define IRQ_MS_DMA 31 /* MemoryStick Controller DMA */
+#define IRQ_UART0 32 /* UART 0 */
+#define IRQ_UART1 33 /* UART 1 */
+#define IRQ_I2S 34 /* I2S */
+#define IRQ_PCM 35 /* PCM */
+#define IRQ_PMCOS0 36 /* PMC OS Timer 0 */
+#define IRQ_PMCOS1 37 /* PMC OS Timer 1 */
+#define IRQ_PMCOS2 38 /* PMC OS Timer 2 */
+#define IRQ_PMCOS3 39 /* PMC OS Timer 3 */
+#define IRQ_VPU 40 /* Video Processing Unit */
+#define IRQ_VID 41 /* Video Digital Input Interface */
+#define IRQ_AC97 42 /* AC97 Interface */
+#define IRQ_EHCI 43 /* USB */
+#define IRQ_NOR 44 /* NOR Flash Controller */
+#define IRQ_PS2MOUSE 45 /* PS/2 Mouse */
+#define IRQ_PS2KBD 46 /* PS/2 Keyboard */
+#define IRQ_UART2 47 /* UART 2 */
+#define IRQ_RTC 48 /* RTC Interrupt */
+#define IRQ_RTCSM 49 /* RTC Second/Minute Update Interrupt */
+#define IRQ_UART3 50 /* UART 3 */
+#define IRQ_ADC 51 /* ADC */
+#define IRQ_EXT5 52 /* External Interrupt 5 */
+#define IRQ_EXT6 53 /* External Interrupt 6 */
+#define IRQ_EXT7 54 /* External Interrupt 7 */
+#define IRQ_CIR 55 /* CIR */
+#define IRQ_DMA0 56 /* DMA Channel 0 */
+#define IRQ_DMA1 57 /* DMA Channel 1 */
+#define IRQ_DMA2 58 /* DMA Channel 2 */
+#define IRQ_DMA3 59 /* DMA Channel 3 */
+#define IRQ_DMA4 60 /* DMA Channel 4 */
+#define IRQ_DMA5 61 /* DMA Channel 5 */
+#define IRQ_DMA6 62 /* DMA Channel 6 */
+#define IRQ_DMA7 63 /* DMA Channel 7 */
+
+#define VT8500_NR_IRQS 64
diff --git a/arch/arm/mach-vt8500/include/mach/vt8500_regs.h b/arch/arm/mach-vt8500/include/mach/vt8500_regs.h
new file mode 100644
index 0000000..29c63ec
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/vt8500_regs.h
@@ -0,0 +1,79 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/vt8500_regs.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_VT8500_REGS_H
+#define __ASM_ARM_ARCH_VT8500_REGS_H
+
+/* VT8500 Registers Map */
+
+#define VT8500_REGS_START_PHYS 0xd8000000 /* Start of MMIO registers */
+#define VT8500_REGS_START_VIRT 0xf8000000 /* Virtual mapping start */
+
+#define VT8500_DDR_BASE 0xd8000000 /* 1k DDR/DDR2 Memory
+ Controller */
+#define VT8500_DMA_BASE 0xd8001000 /* 1k DMA Controller */
+#define VT8500_SFLASH_BASE 0xd8002000 /* 1k Serial Flash Memory
+ Controller */
+#define VT8500_ETHER_BASE 0xd8004000 /* 1k Ethernet MAC 0 */
+#define VT8500_CIPHER_BASE 0xd8006000 /* 4k Cipher */
+#define VT8500_USB_BASE 0xd8007800 /* 2k USB OTG */
+# define VT8500_EHCI_BASE 0xd8007900 /* EHCI */
+# define VT8500_UHCI_BASE 0xd8007b01 /* UHCI */
+#define VT8500_PATA_BASE 0xd8008000 /* 512 PATA */
+#define VT8500_PS2_BASE 0xd8008800 /* 1k PS/2 */
+#define VT8500_NAND_BASE 0xd8009000 /* 1k NAND Controller */
+#define VT8500_NOR_BASE 0xd8009400 /* 1k NOR Controller */
+#define VT8500_SDMMC_BASE 0xd800a000 /* 1k SD/MMC Controller */
+#define VT8500_MS_BASE 0xd800b000 /* 1k MS/MSPRO Controller */
+#define VT8500_LCDC_BASE 0xd800e400 /* 1k LCD Controller */
+#define VT8500_VPU_BASE 0xd8050000 /* 256 VPU */
+#define VT8500_GOV_BASE 0xd8050300 /* 256 GOV */
+#define VT8500_GEGEA_BASE 0xd8050400 /* 768 GE/GE Alpha Mixing */
+#define VT8500_LCDF_BASE 0xd8050900 /* 256 LCD Formatter */
+#define VT8500_VID_BASE 0xd8050a00 /* 256 VID */
+#define VT8500_VPP_BASE 0xd8050b00 /* 256 VPP */
+#define VT8500_TSBK_BASE 0xd80f4000 /* 4k TSBK */
+#define VT8500_JPEGDEC_BASE 0xd80fe000 /* 4k JPEG Decoder */
+#define VT8500_JPEGENC_BASE 0xd80ff000 /* 4k JPEG Encoder */
+#define VT8500_RTC_BASE 0xd8100000 /* 64k RTC */
+#define VT8500_GPIO_BASE 0xd8110000 /* 64k GPIO Configuration */
+#define VT8500_SCC_BASE 0xd8120000 /* 64k System Configuration*/
+#define VT8500_PMC_BASE 0xd8130000 /* 64k PMC Configuration */
+#define VT8500_IC_BASE 0xd8140000 /* 64k Interrupt Controller*/
+#define VT8500_UART0_BASE 0xd8200000 /* 64k UART 0 */
+#define VT8500_UART2_BASE 0xd8210000 /* 64k UART 2 */
+#define VT8500_PWM_BASE 0xd8220000 /* 64k PWM Configuration */
+#define VT8500_SPI0_BASE 0xd8240000 /* 64k SPI 0 */
+#define VT8500_SPI1_BASE 0xd8250000 /* 64k SPI 1 */
+#define VT8500_CIR_BASE 0xd8270000 /* 64k CIR */
+#define VT8500_I2C0_BASE 0xd8280000 /* 64k I2C 0 */
+#define VT8500_AC97_BASE 0xd8290000 /* 64k AC97 */
+#define VT8500_SPI2_BASE 0xd82a0000 /* 64k SPI 2 */
+#define VT8500_UART1_BASE 0xd82b0000 /* 64k UART 1 */
+#define VT8500_UART3_BASE 0xd82c0000 /* 64k UART 3 */
+#define VT8500_PCM_BASE 0xd82d0000 /* 64k PCM */
+#define VT8500_I2C1_BASE 0xd8320000 /* 64k I2C 1 */
+#define VT8500_I2S_BASE 0xd8330000 /* 64k I2S */
+#define VT8500_ADC_BASE 0xd8340000 /* 64k ADC */
+
+#define VT8500_REGS_END_PHYS 0xd834ffff /* End of MMIO registers */
+#define VT8500_REGS_LENGTH (VT8500_REGS_END_PHYS \
+ - VT8500_REGS_START_PHYS + 1)
+
+#endif
diff --git a/arch/arm/mach-vt8500/include/mach/vt8500fb.h b/arch/arm/mach-vt8500/include/mach/vt8500fb.h
new file mode 100644
index 0000000..7f399c3
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/vt8500fb.h
@@ -0,0 +1,31 @@
+/*
+ * VT8500/WM8505 Frame Buffer platform data definitions
+ *
+ * Copyright (C) 2010 Ed Spiridonov <edo.rus@xxxxxxxxx>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _VT8500FB_H
+#define _VT8500FB_H
+
+#include <linux/fb.h>
+
+struct vt8500fb_platform_data {
+ struct fb_videomode mode;
+ u32 xres_virtual;
+ u32 yres_virtual;
+ u32 bpp;
+ unsigned long video_mem_phys;
+ void *video_mem_virt;
+ unsigned long video_mem_len;
+};
+
+#endif /* _VT8500FB_H */
diff --git a/arch/arm/mach-vt8500/include/mach/wm8505_irqs.h b/arch/arm/mach-vt8500/include/mach/wm8505_irqs.h
new file mode 100644
index 0000000..6128627
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/wm8505_irqs.h
@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/wm8505_irqs.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* WM8505 Interrupt Sources */
+
+#define IRQ_UHCI 0 /* UHC FS (UHCI?) */
+#define IRQ_EHCI 1 /* UHC HS */
+#define IRQ_UDCDMA 2 /* UDC DMA */
+ /* Reserved */
+#define IRQ_PS2MOUSE 4 /* PS/2 Mouse */
+#define IRQ_UDC 5 /* UDC */
+#define IRQ_EXT0 6 /* External Interrupt 0 */
+#define IRQ_EXT1 7 /* External Interrupt 1 */
+#define IRQ_KEYPAD 8 /* Keypad */
+#define IRQ_DMA 9 /* DMA Controller */
+#define IRQ_ETHER 10 /* Ethernet MAC */
+ /* Reserved */
+ /* Reserved */
+#define IRQ_EXT2 13 /* External Interrupt 2 */
+#define IRQ_EXT3 14 /* External Interrupt 3 */
+#define IRQ_EXT4 15 /* External Interrupt 4 */
+#define IRQ_APB 16 /* APB Bridge */
+#define IRQ_DMA0 17 /* DMA Channel 0 */
+#define IRQ_I2C1 18 /* I2C 1 */
+#define IRQ_I2C0 19 /* I2C 0 */
+#define IRQ_SDMMC 20 /* SD/MMC Controller */
+#define IRQ_SDMMC_DMA 21 /* SD/MMC Controller DMA */
+#define IRQ_PMC_WU 22 /* Power Management Controller Wakeup */
+#define IRQ_PS2KBD 23 /* PS/2 Keyboard */
+#define IRQ_SPI0 24 /* SPI 0 */
+#define IRQ_SPI1 25 /* SPI 1 */
+#define IRQ_SPI2 26 /* SPI 2 */
+#define IRQ_DMA1 27 /* DMA Channel 1 */
+#define IRQ_NAND 28 /* NAND Flash Controller */
+#define IRQ_NAND_DMA 29 /* NAND Flash Controller DMA */
+#define IRQ_UART5 30 /* UART 5 */
+#define IRQ_UART4 31 /* UART 4 */
+#define IRQ_UART0 32 /* UART 0 */
+#define IRQ_UART1 33 /* UART 1 */
+#define IRQ_DMA2 34 /* DMA Channel 2 */
+#define IRQ_I2S 35 /* I2S */
+#define IRQ_PMCOS0 36 /* PMC OS Timer 0 */
+#define IRQ_PMCOS1 37 /* PMC OS Timer 1 */
+#define IRQ_PMCOS2 38 /* PMC OS Timer 2 */
+#define IRQ_PMCOS3 39 /* PMC OS Timer 3 */
+#define IRQ_DMA3 40 /* DMA Channel 3 */
+#define IRQ_DMA4 41 /* DMA Channel 4 */
+#define IRQ_AC97 42 /* AC97 Interface */
+ /* Reserved */
+#define IRQ_NOR 44 /* NOR Flash Controller */
+#define IRQ_DMA5 45 /* DMA Channel 5 */
+#define IRQ_DMA6 46 /* DMA Channel 6 */
+#define IRQ_UART2 47 /* UART 2 */
+#define IRQ_RTC 48 /* RTC Interrupt */
+#define IRQ_RTCSM 49 /* RTC Second/Minute Update Interrupt */
+#define IRQ_UART3 50 /* UART 3 */
+#define IRQ_DMA7 51 /* DMA Channel 7 */
+#define IRQ_EXT5 52 /* External Interrupt 5 */
+#define IRQ_EXT6 53 /* External Interrupt 6 */
+#define IRQ_EXT7 54 /* External Interrupt 7 */
+#define IRQ_CIR 55 /* CIR */
+#define IRQ_SIC0 56 /* SIC IRQ0 */
+#define IRQ_SIC1 57 /* SIC IRQ1 */
+#define IRQ_SIC2 58 /* SIC IRQ2 */
+#define IRQ_SIC3 59 /* SIC IRQ3 */
+#define IRQ_SIC4 60 /* SIC IRQ4 */
+#define IRQ_SIC5 61 /* SIC IRQ5 */
+#define IRQ_SIC6 62 /* SIC IRQ6 */
+#define IRQ_SIC7 63 /* SIC IRQ7 */
+ /* Reserved */
+#define IRQ_JPEGDEC 65 /* JPEG Decoder */
+#define IRQ_SAE 66 /* SAE (?) */
+ /* Reserved */
+#define IRQ_VPU 79 /* Video Processing Unit */
+#define IRQ_VPP 80 /* Video Post-Processor */
+#define IRQ_VID 81 /* Video Digital Input Interface */
+#define IRQ_SPU 82 /* SPU (?) */
+#define IRQ_PIP 83 /* PIP Error */
+#define IRQ_GE 84 /* Graphic Engine */
+#define IRQ_GOV 85 /* Graphic Overlay Engine */
+#define IRQ_DVO 86 /* Digital Video Output */
+ /* Reserved */
+#define IRQ_DMA8 92 /* DMA Channel 8 */
+#define IRQ_DMA9 93 /* DMA Channel 9 */
+#define IRQ_DMA10 94 /* DMA Channel 10 */
+#define IRQ_DMA11 95 /* DMA Channel 11 */
+#define IRQ_DMA12 96 /* DMA Channel 12 */
+#define IRQ_DMA13 97 /* DMA Channel 13 */
+#define IRQ_DMA14 98 /* DMA Channel 14 */
+#define IRQ_DMA15 99 /* DMA Channel 15 */
+ /* Reserved */
+#define IRQ_GOVW 111 /* GOVW (?) */
+#define IRQ_GOVRSDSCD 112 /* GOVR SDSCD (?) */
+#define IRQ_GOVRSDMIF 113 /* GOVR SDMIF (?) */
+#define IRQ_GOVRHDSCD 114 /* GOVR HDSCD (?) */
+#define IRQ_GOVRHDMIF 115 /* GOVR HDMIF (?) */
+
+#define WM8505_NR_IRQS 116
diff --git a/arch/arm/mach-vt8500/include/mach/wm8505_regs.h b/arch/arm/mach-vt8500/include/mach/wm8505_regs.h
new file mode 100644
index 0000000..df15509
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/wm8505_regs.h
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/wm8505_regs.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_WM8505_REGS_H
+#define __ASM_ARM_ARCH_WM8505_REGS_H
+
+/* WM8505 Registers Map */
+
+#define WM8505_REGS_START_PHYS 0xd8000000 /* Start of MMIO registers */
+#define WM8505_REGS_START_VIRT 0xf8000000 /* Virtual mapping start */
+
+#define WM8505_DDR_BASE 0xd8000400 /* 1k DDR/DDR2 Memory
+ Controller */
+#define WM8505_DMA_BASE 0xd8001800 /* 1k DMA Controller */
+#define WM8505_VDMA_BASE 0xd8001c00 /* 1k VDMA */
+#define WM8505_SFLASH_BASE 0xd8002000 /* 1k Serial Flash Memory
+ Controller */
+#define WM8505_ETHER_BASE 0xd8004000 /* 1k Ethernet MAC 0 */
+#define WM8505_CIPHER_BASE 0xd8006000 /* 4k Cipher */
+#define WM8505_USB_BASE 0xd8007000 /* 2k USB 2.0 Host */
+# define WM8505_EHCI_BASE 0xd8007100 /* EHCI */
+# define WM8505_UHCI_BASE 0xd8007301 /* UHCI */
+#define WM8505_PS2_BASE 0xd8008800 /* 1k PS/2 */
+#define WM8505_NAND_BASE 0xd8009000 /* 1k NAND Controller */
+#define WM8505_NOR_BASE 0xd8009400 /* 1k NOR Controller */
+#define WM8505_SDMMC_BASE 0xd800a000 /* 1k SD/MMC Controller */
+#define WM8505_VPU_BASE 0xd8050000 /* 256 VPU */
+#define WM8505_GOV_BASE 0xd8050300 /* 256 GOV */
+#define WM8505_GEGEA_BASE 0xd8050400 /* 768 GE/GE Alpha Mixing */
+#define WM8505_GOVR_BASE 0xd8050800 /* 512 GOVR (frambuffer) */
+#define WM8505_VID_BASE 0xd8050a00 /* 256 VID */
+#define WM8505_SCL_BASE 0xd8050d00 /* 256 SCL */
+#define WM8505_VPP_BASE 0xd8050f00 /* 256 VPP */
+#define WM8505_JPEGDEC_BASE 0xd80fe000 /* 4k JPEG Decoder */
+#define WM8505_RTC_BASE 0xd8100000 /* 64k RTC */
+#define WM8505_GPIO_BASE 0xd8110000 /* 64k GPIO Configuration */
+#define WM8505_SCC_BASE 0xd8120000 /* 64k System Configuration*/
+#define WM8505_PMC_BASE 0xd8130000 /* 64k PMC Configuration */
+#define WM8505_IC_BASE 0xd8140000 /* 64k Interrupt Controller*/
+#define WM8505_SIC_BASE 0xd8150000 /* 64k Secondary IC */
+#define WM8505_UART0_BASE 0xd8200000 /* 64k UART 0 */
+#define WM8505_UART2_BASE 0xd8210000 /* 64k UART 2 */
+#define WM8505_PWM_BASE 0xd8220000 /* 64k PWM Configuration */
+#define WM8505_SPI0_BASE 0xd8240000 /* 64k SPI 0 */
+#define WM8505_SPI1_BASE 0xd8250000 /* 64k SPI 1 */
+#define WM8505_KEYPAD_BASE 0xd8260000 /* 64k Keypad control */
+#define WM8505_CIR_BASE 0xd8270000 /* 64k CIR */
+#define WM8505_I2C0_BASE 0xd8280000 /* 64k I2C 0 */
+#define WM8505_AC97_BASE 0xd8290000 /* 64k AC97 */
+#define WM8505_SPI2_BASE 0xd82a0000 /* 64k SPI 2 */
+#define WM8505_UART1_BASE 0xd82b0000 /* 64k UART 1 */
+#define WM8505_UART3_BASE 0xd82c0000 /* 64k UART 3 */
+#define WM8505_I2C1_BASE 0xd8320000 /* 64k I2C 1 */
+#define WM8505_I2S_BASE 0xd8330000 /* 64k I2S */
+#define WM8505_UART4_BASE 0xd8370000 /* 64k UART 4 */
+#define WM8505_UART5_BASE 0xd8380000 /* 64k UART 5 */
+
+#define WM8505_REGS_END_PHYS 0xd838ffff /* End of MMIO registers */
+#define WM8505_REGS_LENGTH (WM8505_REGS_END_PHYS \
+ - WM8505_REGS_START_PHYS + 1)
+
+#endif
diff --git a/arch/arm/mach-vt8500/irq.c b/arch/arm/mach-vt8500/irq.c
new file mode 100644
index 0000000..5f4ddde
--- /dev/null
+++ b/arch/arm/mach-vt8500/irq.c
@@ -0,0 +1,177 @@
+/*
+ * arch/arm/mach-vt8500/irq.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/irq.h>
+
+#include "devices.h"
+
+#define VT8500_IC_DCTR 0x40 /* Destination control
+ register, 64*u8 */
+#define VT8500_INT_ENABLE (1 << 3)
+#define VT8500_TRIGGER_HIGH (0 << 4)
+#define VT8500_TRIGGER_RISING (1 << 4)
+#define VT8500_TRIGGER_FALLING (2 << 4)
+#define VT8500_EDGE ( VT8500_TRIGGER_RISING \
+ | VT8500_TRIGGER_FALLING)
+#define VT8500_IC_STATUS 0x80 /* Interrupt status, 2*u32 */
+
+static void __iomem *ic_regbase;
+static void __iomem *sic_regbase;
+
+static void vt8500_irq_mask(unsigned int irq)
+{
+ void __iomem *base = ic_regbase;
+ u8 edge;
+
+ if (irq >= 64) {
+ base = sic_regbase;
+ irq -= 64;
+ }
+ edge = readb(base + VT8500_IC_DCTR + irq) & VT8500_EDGE;
+ if (edge) {
+ void __iomem *stat_reg = base + VT8500_IC_STATUS
+ + (irq < 32 ? 0 : 4);
+ unsigned status = readl(stat_reg);
+
+ status |= (1 << (irq & 0x1f));
+ writel(status, stat_reg);
+ } else {
+ u8 dctr = readb(base + VT8500_IC_DCTR + irq);
+
+ dctr &= ~VT8500_INT_ENABLE;
+ writeb(dctr, base + VT8500_IC_DCTR + irq);
+ }
+}
+
+static void vt8500_irq_unmask(unsigned int irq)
+{
+ void __iomem *base = ic_regbase;
+ u8 dctr;
+
+ if (irq >= 64) {
+ base = sic_regbase;
+ irq -= 64;
+ }
+ dctr = readb(base + VT8500_IC_DCTR + irq);
+ dctr |= VT8500_INT_ENABLE;
+ writeb(dctr, base + VT8500_IC_DCTR + irq);
+}
+
+static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type)
+{
+ void __iomem *base = ic_regbase;
+ unsigned int orig_irq = irq;
+ u8 dctr;
+
+ if (irq >= 64) {
+ base = sic_regbase;
+ irq -= 64;
+ }
+
+ dctr = readb(base + VT8500_IC_DCTR + irq);
+ dctr &= ~VT8500_EDGE;
+
+ switch (flow_type) {
+ case IRQF_TRIGGER_LOW:
+ return -EINVAL;
+ case IRQF_TRIGGER_HIGH:
+ dctr |= VT8500_TRIGGER_HIGH;
+ irq_desc[orig_irq].handle_irq = handle_level_irq;
+ break;
+ case IRQF_TRIGGER_FALLING:
+ dctr |= VT8500_TRIGGER_FALLING;
+ irq_desc[orig_irq].handle_irq = handle_edge_irq;
+ break;
+ case IRQF_TRIGGER_RISING:
+ dctr |= VT8500_TRIGGER_RISING;
+ irq_desc[orig_irq].handle_irq = handle_edge_irq;
+ break;
+ }
+ writeb(dctr, base + VT8500_IC_DCTR + irq);
+
+ return 0;
+}
+
+static struct irq_chip vt8500_irq_chip = {
+ .name = "vt8500",
+ .ack = vt8500_irq_mask,
+ .mask = vt8500_irq_mask,
+ .unmask = vt8500_irq_unmask,
+ .set_type = vt8500_irq_set_type,
+};
+
+void __init vt8500_init_irq(void)
+{
+ unsigned int i;
+
+ ic_regbase = ioremap(wmt_ic_base, SZ_64K);
+
+ if (ic_regbase) {
+ /* Enable rotating priority for IRQ */
+ writel((1 << 6), ic_regbase + 0x20);
+ writel(0, ic_regbase + 0x24);
+
+ for (i = 0; i < wmt_nr_irqs; i++) {
+ /* Disable all interrupts and route them to IRQ */
+ writeb(0x00, ic_regbase + VT8500_IC_DCTR + i);
+
+ set_irq_chip(i, &vt8500_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+ } else {
+ printk(KERN_ERR "Unable to remap the Interrupt Controller registers, not enabling IRQs!\n");
+ }
+}
+
+void __init wm8505_init_irq(void)
+{
+ unsigned int i;
+
+ ic_regbase = ioremap(wmt_ic_base, SZ_64K);
+ sic_regbase = ioremap(wmt_sic_base, SZ_64K);
+
+ if (ic_regbase && sic_regbase) {
+ /* Enable rotating priority for IRQ */
+ writel((1 << 6), ic_regbase + 0x20);
+ writel(0, ic_regbase + 0x24);
+ writel((1 << 6), sic_regbase + 0x20);
+ writel(0, sic_regbase + 0x24);
+
+ for (i = 0; i < wmt_nr_irqs; i++) {
+ /* Disable all interrupts and route them to IRQ */
+ if (i < 64)
+ writeb(0x00, ic_regbase + VT8500_IC_DCTR + i);
+ else
+ writeb(0x00, sic_regbase + VT8500_IC_DCTR
+ + i - 64);
+
+ set_irq_chip(i, &vt8500_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+ } else {
+ printk(KERN_ERR "Unable to remap the Interrupt Controller registers, not enabling IRQs!\n");
+ }
+}
diff --git a/arch/arm/mach-vt8500/pwm.c b/arch/arm/mach-vt8500/pwm.c
new file mode 100644
index 0000000..8ad825e
--- /dev/null
+++ b/arch/arm/mach-vt8500/pwm.c
@@ -0,0 +1,265 @@
+/*
+ * arch/arm/mach-vt8500/pwm.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@xxxxxxxxx>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+#include <linux/delay.h>
+
+#include <asm/div64.h>
+
+#define VT8500_NR_PWMS 4
+
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_list);
+
+struct pwm_device {
+ struct list_head node;
+ struct platform_device *pdev;
+
+ const char *label;
+
+ void __iomem *regbase;
+
+ unsigned int use_count;
+ unsigned int pwm_id;
+};
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+static inline void pwm_busy_wait(void __iomem *reg, u8 bitmask)
+{
+ int loops = msecs_to_loops(10);
+ while ((readb(reg) & bitmask) && --loops)
+ cpu_relax();
+
+ if (unlikely(!loops))
+ pr_warning("Waiting for status bits 0x%x to clear timed out\n",
+ bitmask);
+}
+
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+ unsigned long long c;
+ unsigned long period_cycles, prescale, pv, dc;
+
+ if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
+ return -EINVAL;
+
+ c = 25000000/2; /* wild guess --- need to implement clocks */
+ c = c * period_ns;
+ do_div(c, 1000000000);
+ period_cycles = c;
+
+ if (period_cycles < 1)
+ period_cycles = 1;
+ prescale = (period_cycles - 1) / 4096;
+ pv = period_cycles / (prescale + 1) - 1;
+ if (pv > 4095)
+ pv = 4095;
+
+ if (prescale > 1023)
+ return -EINVAL;
+
+ c = (unsigned long long)pv * duty_ns;
+ do_div(c, period_ns);
+ dc = c;
+
+ pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 1));
+ writel(prescale, pwm->regbase + 0x4 + (pwm->pwm_id << 4));
+
+ pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 2));
+ writel(pv, pwm->regbase + 0x8 + (pwm->pwm_id << 4));
+
+ pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 3));
+ writel(dc, pwm->regbase + 0xc + (pwm->pwm_id << 4));
+
+ return 0;
+}
+EXPORT_SYMBOL(pwm_config);
+
+int pwm_enable(struct pwm_device *pwm)
+{
+ pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 0));
+ writel(5, pwm->regbase + (pwm->pwm_id << 4));
+ return 0;
+}
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+ pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 0));
+ writel(0, pwm->regbase + (pwm->pwm_id << 4));
+}
+EXPORT_SYMBOL(pwm_disable);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+ struct pwm_device *pwm;
+ int found = 0;
+
+ mutex_lock(&pwm_lock);
+
+ list_for_each_entry(pwm, &pwm_list, node) {
+ if (pwm->pwm_id == pwm_id) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (found) {
+ if (pwm->use_count == 0) {
+ pwm->use_count++;
+ pwm->label = label;
+ } else {
+ pwm = ERR_PTR(-EBUSY);
+ }
+ } else {
+ pwm = ERR_PTR(-ENOENT);
+ }
+
+ mutex_unlock(&pwm_lock);
+ return pwm;
+}
+EXPORT_SYMBOL(pwm_request);
+
+void pwm_free(struct pwm_device *pwm)
+{
+ mutex_lock(&pwm_lock);
+
+ if (pwm->use_count) {
+ pwm->use_count--;
+ pwm->label = NULL;
+ } else {
+ pr_warning("PWM device already freed\n");
+ }
+
+ mutex_unlock(&pwm_lock);
+}
+EXPORT_SYMBOL(pwm_free);
+
+static inline void __add_pwm(struct pwm_device *pwm)
+{
+ mutex_lock(&pwm_lock);
+ list_add_tail(&pwm->node, &pwm_list);
+ mutex_unlock(&pwm_lock);
+}
+
+static int __devinit pwm_probe(struct platform_device *pdev)
+{
+ struct pwm_device *pwms;
+ struct resource *r;
+ int ret = 0;
+ int i;
+
+ pwms = kzalloc(sizeof(struct pwm_device) * VT8500_NR_PWMS, GFP_KERNEL);
+ if (pwms == NULL) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < VT8500_NR_PWMS; i++) {
+ pwms[i].use_count = 0;
+ pwms[i].pwm_id = i;
+ pwms[i].pdev = pdev;
+ }
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "no memory resource defined\n");
+ ret = -ENODEV;
+ goto err_free;
+ }
+
+ r = request_mem_region(r->start, resource_size(r), pdev->name);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "failed to request memory resource\n");
+ ret = -EBUSY;
+ goto err_free;
+ }
+
+ pwms[0].regbase = ioremap(r->start, resource_size(r));
+ if (pwms[0].regbase == NULL) {
+ dev_err(&pdev->dev, "failed to ioremap() registers\n");
+ ret = -ENODEV;
+ goto err_free_mem;
+ }
+
+ for (i = 1; i < VT8500_NR_PWMS; i++)
+ pwms[i].regbase = pwms[0].regbase;
+
+ for (i = 0; i < VT8500_NR_PWMS; i++)
+ __add_pwm(&pwms[i]);
+
+ platform_set_drvdata(pdev, pwms);
+ return 0;
+
+err_free_mem:
+ release_mem_region(r->start, resource_size(r));
+err_free:
+ kfree(pwms);
+ return ret;
+}
+
+static int __devexit pwm_remove(struct platform_device *pdev)
+{
+ struct pwm_device *pwms;
+ struct resource *r;
+ int i;
+
+ pwms = platform_get_drvdata(pdev);
+ if (pwms == NULL)
+ return -ENODEV;
+
+ mutex_lock(&pwm_lock);
+
+ for (i = 0; i < VT8500_NR_PWMS; i++)
+ list_del(&pwms[i].node);
+ mutex_unlock(&pwm_lock);
+
+ iounmap(pwms[0].regbase);
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(r->start, resource_size(r));
+
+ kfree(pwms);
+ return 0;
+}
+
+static struct platform_driver pwm_driver = {
+ .driver = {
+ .name = "vt8500-pwm",
+ .owner = THIS_MODULE,
+ },
+ .probe = pwm_probe,
+ .remove = __devexit_p(pwm_remove),
+};
+
+static int __init pwm_init(void)
+{
+ return platform_driver_register(&pwm_driver);
+}
+arch_initcall(pwm_init);
+
+static void __exit pwm_exit(void)
+{
+ platform_driver_unregister(&pwm_driver);
+}
+module_exit(pwm_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-vt8500/timer.c b/arch/arm/mach-vt8500/timer.c
new file mode 100644
index 0000000..d5376c5
--- /dev/null
+++ b/arch/arm/mach-vt8500/timer.c
@@ -0,0 +1,155 @@
+/*
+ * arch/arm/mach-vt8500/timer.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/delay.h>
+
+#include <asm/mach/time.h>
+
+#include "devices.h"
+
+#define VT8500_TIMER_OFFSET 0x0100
+#define TIMER_MATCH_VAL 0x0000
+#define TIMER_COUNT_VAL 0x0010
+#define TIMER_STATUS_VAL 0x0014
+#define TIMER_IER_VAL 0x001c /* interrupt enable */
+#define TIMER_CTRL_VAL 0x0020
+#define TIMER_AS_VAL 0x0024 /* access status */
+#define TIMER_COUNT_R_ACTIVE (1 << 5) /* not ready for read */
+#define TIMER_COUNT_W_ACTIVE (1 << 4) /* not ready for write */
+#define TIMER_MATCH_W_ACTIVE (1 << 0) /* not ready for write */
+#define VT8500_TIMER_HZ 3000000
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+
+static void __iomem *regbase;
+
+static cycle_t vt8500_timer_read(struct clocksource *cs)
+{
+ int loops = msecs_to_loops(10);
+ writel(3, regbase + TIMER_CTRL_VAL);
+ while ((readl((regbase + TIMER_AS_VAL)) & TIMER_COUNT_R_ACTIVE)
+ && --loops)
+ cpu_relax();
+ return readl(regbase + TIMER_COUNT_VAL);
+}
+
+struct clocksource clocksource = {
+ .name = "vt8500_timer",
+ .rating = 200,
+ .read = vt8500_timer_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int vt8500_timer_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ int loops = msecs_to_loops(10);
+ cycle_t alarm = clocksource.read(&clocksource) + cycles;
+ while ((readl(regbase + TIMER_AS_VAL) & TIMER_MATCH_W_ACTIVE)
+ && --loops)
+ cpu_relax();
+ writel((unsigned long)alarm, regbase + TIMER_MATCH_VAL);
+
+ if ((signed)(alarm - clocksource.read(&clocksource)) <= 16)
+ return -ETIME;
+
+ writel(1, regbase + TIMER_IER_VAL);
+
+ return 0;
+}
+
+static void vt8500_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_RESUME:
+ case CLOCK_EVT_MODE_PERIODIC:
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ writel(readl(regbase + TIMER_CTRL_VAL) | 1,
+ regbase + TIMER_CTRL_VAL);
+ writel(0, regbase + TIMER_IER_VAL);
+ break;
+ }
+}
+
+struct clock_event_device clockevent = {
+ .name = "vt8500_timer",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 200,
+ .set_next_event = vt8500_timer_set_next_event,
+ .set_mode = vt8500_timer_set_mode,
+};
+
+static irqreturn_t vt8500_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+ writel(0xf, regbase + TIMER_STATUS_VAL);
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+struct irqaction irq = {
+ .name = "vt8500_timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = vt8500_timer_interrupt,
+ .dev_id = &clockevent,
+};
+
+static void __init vt8500_timer_init(void)
+{
+ regbase = ioremap(wmt_pmc_base + VT8500_TIMER_OFFSET, 0x28);
+ if (!regbase)
+ printk(KERN_ERR "vt8500_timer_init: failed to map MMIO registers\n");
+
+ writel(1, regbase + TIMER_CTRL_VAL);
+ writel(0xf, regbase + TIMER_STATUS_VAL);
+ writel(~0, regbase + TIMER_MATCH_VAL);
+
+ if (clocksource_register_hz(&clocksource, VT8500_TIMER_HZ))
+ printk(KERN_ERR "vt8500_timer_init: clocksource_register failed for %s\n",
+ clocksource.name);
+
+ clockevents_calc_mult_shift(&clockevent, VT8500_TIMER_HZ, 4);
+
+ /* copy-pasted from mach-msm; no idea */
+ clockevent.max_delta_ns =
+ clockevent_delta2ns(0xf0000000, &clockevent);
+ clockevent.min_delta_ns = clockevent_delta2ns(4, &clockevent);
+ clockevent.cpumask = cpumask_of(0);
+
+ if (setup_irq(wmt_timer_irq, &irq))
+ printk(KERN_ERR "vt8500_timer_init: setup_irq failed for %s\n",
+ clockevent.name);
+ clockevents_register_device(&clockevent);
+}
+
+struct sys_timer vt8500_timer = {
+ .init = vt8500_timer_init
+};
diff --git a/arch/arm/mach-vt8500/wm8505_7in.c b/arch/arm/mach-vt8500/wm8505_7in.c
new file mode 100644
index 0000000..e73aadb
--- /dev/null
+++ b/arch/arm/mach-vt8500/wm8505_7in.c
@@ -0,0 +1,77 @@
+/*
+ * arch/arm/mach-vt8500/wm8505_7in.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/io.h>
+#include <linux/pm.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "devices.h"
+
+static void __iomem *pmc_hiber;
+
+static struct platform_device *devices[] __initdata = {
+ &vt8500_device_uart0,
+ &vt8500_device_ehci,
+ &vt8500_device_wm8505_fb,
+ &vt8500_device_ge_rops,
+ &vt8500_device_pwm,
+ &vt8500_device_pwmbl,
+ &vt8500_device_rtc,
+};
+
+static void vt8500_power_off(void)
+{
+ local_irq_disable();
+ writew(5, pmc_hiber);
+ asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0));
+}
+
+void __init wm8505_7in_init(void)
+{
+#ifdef CONFIG_FB_WM8505
+ void __iomem *gpio_mux_reg = ioremap(wmt_gpio_base + 0x200, 4);
+ if (gpio_mux_reg) {
+ writel(readl(gpio_mux_reg) | 0x80000000, gpio_mux_reg);
+ iounmap(gpio_mux_reg);
+ } else {
+ printk(KERN_ERR "Could not remap the GPIO mux register, display may not work properly!\n");
+ }
+#endif
+ pmc_hiber = ioremap(wmt_pmc_base + 0x12, 2);
+ if (pmc_hiber)
+ pm_power_off = &vt8500_power_off;
+ else
+ printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n");
+
+ wm8505_set_resources();
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ vt8500_gpio_init();
+}
+
+MACHINE_START(WM8505_7IN_NETBOOK, "WM8505 7-inch generic netbook")
+ .boot_params = 0x00000100,
+ .reserve = wm8505_reserve_mem,
+ .map_io = wm8505_map_io,
+ .init_irq = wm8505_init_irq,
+ .timer = &vt8500_timer,
+ .init_machine = wm8505_7in_init,
+MACHINE_END
--
1.7.3.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Liam Girdwood: "Re: [PATCH] regulator: Make regulator_has_full_constraints a bool"
Previous message: Andrew Morton: "Re: [PATCH v3] rtc-cmos: fix suspend/resume"
In reply to: Ryan Mallon: "Re: [PATCH 1/6 v10] ARM: Add basic architecture support for VIA/WonderMedia85xx SoC's"
Next in thread: Ryan Mallon: "Re: [PATCH 1/6 v11] ARM: Add basic architecture support for VIA/WonderMedia85xx SoC's"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]