[PATCH 2/4] memstick: Add driver for Ricoh R5C592 card reader.
From: Maxim Levitsky
Date: Mon Jan 10 2011 - 20:50:58 EST
Signed-off-by: Maxim Levitsky <maximlevitsky@xxxxxxxxx>
---
MAINTAINERS | 5 +
drivers/memstick/host/Kconfig | 12 +
drivers/memstick/host/Makefile | 1 +
drivers/memstick/host/r592.c | 908 ++++++++++++++++++++++++++++++++++++++++
drivers/memstick/host/r592.h | 175 ++++++++
5 files changed, 1101 insertions(+), 0 deletions(-)
create mode 100644 drivers/memstick/host/r592.c
create mode 100644 drivers/memstick/host/r592.h
diff --git a/MAINTAINERS b/MAINTAINERS
index bcb7830..d3aec27 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5059,6 +5059,11 @@ S: Maintained
F: drivers/mtd/nand/r852.c
F: drivers/mtd/nand/r852.h
+RICOH R5C592 MEMORYSTICK DRIVER
+M: Maxim Levitsky <maximlevitsky@xxxxxxxxx>
+S: Maintained
+F: drivers/memstick/host/r592.*
+
RISCOM8 DRIVER
S: Orphan
F: Documentation/serial/riscom8.txt
diff --git a/drivers/memstick/host/Kconfig b/drivers/memstick/host/Kconfig
index 4ce5c8d..cc0997a 100644
--- a/drivers/memstick/host/Kconfig
+++ b/drivers/memstick/host/Kconfig
@@ -30,3 +30,15 @@ config MEMSTICK_JMICRON_38X
To compile this driver as a module, choose M here: the
module will be called jmb38x_ms.
+
+config MEMSTICK_R592
+ tristate "Ricoh R5C592 MemoryStick interface support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && PCI
+
+ help
+ Say Y here if you want to be able to access MemoryStick cards with
+ the Ricoh R5C592 MemoryStick card reader (which is part of 5 in one
+ multifunction reader)
+
+ To compile this driver as a module, choose M here: the module will
+ be called r592.
diff --git a/drivers/memstick/host/Makefile b/drivers/memstick/host/Makefile
index 12530e4..ad63c16 100644
--- a/drivers/memstick/host/Makefile
+++ b/drivers/memstick/host/Makefile
@@ -8,3 +8,4 @@ endif
obj-$(CONFIG_MEMSTICK_TIFM_MS) += tifm_ms.o
obj-$(CONFIG_MEMSTICK_JMICRON_38X) += jmb38x_ms.o
+obj-$(CONFIG_MEMSTICK_R592) += r592.o
diff --git a/drivers/memstick/host/r592.c b/drivers/memstick/host/r592.c
new file mode 100644
index 0000000..767406c
--- /dev/null
+++ b/drivers/memstick/host/r592.c
@@ -0,0 +1,908 @@
+/*
+ * Copyright (C) 2010 - Maxim Levitsky
+ * driver for Ricoh memstick readers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/freezer.h>
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/sched.h>
+#include <linux/highmem.h>
+#include <asm/byteorder.h>
+#include <linux/swab.h>
+#include "r592.h"
+
+static int enable_dma = 1;
+static int debug;
+
+static const char *tpc_names[] = {
+ "MS_TPC_READ_MG_STATUS",
+ "MS_TPC_READ_LONG_DATA",
+ "MS_TPC_READ_SHORT_DATA",
+ "MS_TPC_READ_REG",
+ "MS_TPC_READ_QUAD_DATA",
+ "INVALID",
+ "MS_TPC_GET_INT",
+ "MS_TPC_SET_RW_REG_ADRS",
+ "MS_TPC_EX_SET_CMD",
+ "MS_TPC_WRITE_QUAD_DATA",
+ "MS_TPC_WRITE_REG",
+ "MS_TPC_WRITE_SHORT_DATA",
+ "MS_TPC_WRITE_LONG_DATA",
+ "MS_TPC_SET_CMD",
+};
+
+/**
+ * memstick_debug_get_tpc_name - debug helper that returns string for
+ * a TPC number
+ */
+const char *memstick_debug_get_tpc_name(int tpc)
+{
+ return tpc_names[tpc-1];
+}
+EXPORT_SYMBOL(memstick_debug_get_tpc_name);
+
+
+/* Read a register*/
+static inline u32 r592_read_reg(struct r592_device *dev, int address)
+{
+ u32 value = readl(dev->mmio + address);
+ dbg_reg("reg #%02d == 0x%08x", address, value);
+ return value;
+}
+
+/* Write a register */
+static inline void r592_write_reg(struct r592_device *dev,
+ int address, u32 value)
+{
+ dbg_reg("reg #%02d <- 0x%08x", address, value);
+ writel(value, dev->mmio + address);
+}
+
+/* Reads a big endian DWORD register */
+static inline u32 r592_read_reg_raw_be(struct r592_device *dev, int address)
+{
+ u32 value = __raw_readl(dev->mmio + address);
+ dbg_reg("reg #%02d == 0x%08x", address, value);
+ return be32_to_cpu(value);
+}
+
+/* Writes a big endian DWORD register */
+static inline void r592_write_reg_raw_be(struct r592_device *dev,
+ int address, u32 value)
+{
+ dbg_reg("reg #%02d <- 0x%08x", address, value);
+ __raw_writel(cpu_to_be32(value), dev->mmio + address);
+}
+
+/* Set specific bits in a register (little endian) */
+static inline void r592_set_reg_mask(struct r592_device *dev,
+ int address, u32 mask)
+{
+ u32 reg = readl(dev->mmio + address);
+ dbg_reg("reg #%02d |= 0x%08x (old =0x%08x)", address, mask, reg);
+ writel(reg | mask , dev->mmio + address);
+}
+
+/* Clear specific bits in a register (little endian) */
+static inline void r592_clear_reg_mask(struct r592_device *dev,
+ int address, u32 mask)
+{
+ u32 reg = readl(dev->mmio + address);
+ dbg_reg("reg #%02d &= 0x%08x (old = 0x%08x, mask = 0x%08x)",
+ address, ~mask, reg, mask);
+ writel(reg & ~mask, dev->mmio + address);
+}
+
+
+/* Wait for status bits while checking for errors */
+static int r592_wait_status(struct r592_device *dev, u32 mask, u32 wanted_mask)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+ u32 reg = r592_read_reg(dev, R592_STATUS);
+
+ if ((reg & mask) == wanted_mask)
+ return 0;
+
+ while (time_before(jiffies, timeout)) {
+
+ reg = r592_read_reg(dev, R592_STATUS);
+
+ if ((reg & mask) == wanted_mask)
+ return 0;
+
+ if (reg & (R592_STATUS_SEND_ERR | R592_STATUS_RECV_ERR))
+ return -EIO;
+
+ cpu_relax();
+ }
+ return -ETIME;
+}
+
+
+/* Enable/disable device */
+static int r592_enable_device(struct r592_device *dev, bool enable)
+{
+ dbg("%sabling the device", enable ? "en" : "dis");
+
+ if (enable) {
+
+ /* Power up the card */
+ r592_write_reg(dev, R592_POWER, R592_POWER_0 | R592_POWER_1);
+
+ /* Perform a reset */
+ r592_set_reg_mask(dev, R592_IO, R592_IO_RESET);
+
+ msleep(100);
+ } else
+ /* Power down the card */
+ r592_write_reg(dev, R592_POWER, 0);
+
+ return 0;
+}
+
+/* Set serial/parallel mode */
+static int r592_set_mode(struct r592_device *dev, bool parallel_mode)
+{
+ if (!parallel_mode) {
+ dbg("switching to serial mode");
+
+ /* Set serial mode */
+ r592_write_reg(dev, R592_IO_MODE, R592_IO_MODE_SERIAL);
+
+ r592_clear_reg_mask(dev, R592_POWER, R592_POWER_20);
+
+ } else {
+ dbg("switching to parallel mode");
+
+ /* This setting should be set _before_ switch TPC */
+ r592_set_reg_mask(dev, R592_POWER, R592_POWER_20);
+
+ r592_clear_reg_mask(dev, R592_IO,
+ R592_IO_SERIAL1 | R592_IO_SERIAL2);
+
+ /* Set the parallel mode now */
+ r592_write_reg(dev, R592_IO_MODE, R592_IO_MODE_PARALLEL);
+ }
+
+ dev->parallel_mode = parallel_mode;
+ return 0;
+}
+
+/* Perform a controller reset without powering down the card */
+static void r592_host_reset(struct r592_device *dev)
+{
+ r592_set_reg_mask(dev, R592_IO, R592_IO_RESET);
+ msleep(100);
+ r592_set_mode(dev, dev->parallel_mode);
+}
+
+/* Disable all hardware interrupts */
+static void r592_clear_interrupts(struct r592_device *dev)
+{
+ /* Disable & ACK all interrupts */
+ r592_clear_reg_mask(dev, R592_REG_MSC, IRQ_ALL_ACK_MASK);
+ r592_clear_reg_mask(dev, R592_REG_MSC, IRQ_ALL_EN_MASK);
+}
+
+/* Tests if there is an CRC error */
+static int r592_test_io_error(struct r592_device *dev)
+{
+ if (!(r592_read_reg(dev, R592_STATUS) &
+ (R592_STATUS_SEND_ERR | R592_STATUS_RECV_ERR)))
+ return 0;
+
+ return -EIO;
+}
+
+/* Ensure that FIFO is ready for use */
+static int r592_test_fifo_empty(struct r592_device *dev)
+{
+ if (r592_read_reg(dev, R592_REG_MSC) & R592_REG_MSC_FIFO_EMPTY)
+ return 0;
+
+ dbg("FIFO not ready, trying to reset the device");
+ r592_host_reset(dev);
+
+ if (r592_read_reg(dev, R592_REG_MSC) & R592_REG_MSC_FIFO_EMPTY)
+ return 0;
+
+ message("FIFO still not ready, giving up");
+ return -EIO;
+}
+
+/* Activates the DMA transfer from to FIFO */
+static void r592_start_dma(struct r592_device *dev, bool is_write)
+{
+ unsigned long flags;
+ u32 reg;
+ spin_lock_irqsave(&dev->irq_lock, flags);
+
+ /* Ack interrupts (just in case) + enable them */
+ r592_clear_reg_mask(dev, R592_REG_MSC, DMA_IRQ_ACK_MASK);
+ r592_set_reg_mask(dev, R592_REG_MSC, DMA_IRQ_EN_MASK);
+
+ /* Set DMA address */
+ r592_write_reg(dev, R592_FIFO_DMA, sg_dma_address(&dev->req->sg));
+
+ /* Enable the DMA */
+ reg = r592_read_reg(dev, R592_FIFO_DMA_SETTINGS);
+ reg |= R592_FIFO_DMA_SETTINGS_EN;
+
+ if (!is_write)
+ reg |= R592_FIFO_DMA_SETTINGS_DIR;
+ else
+ reg &= ~R592_FIFO_DMA_SETTINGS_DIR;
+ r592_write_reg(dev, R592_FIFO_DMA_SETTINGS, reg);
+
+ spin_unlock_irqrestore(&dev->irq_lock, flags);
+}
+
+/* Cleanups DMA related settings */
+static void r592_stop_dma(struct r592_device *dev, int error)
+{
+ r592_clear_reg_mask(dev, R592_FIFO_DMA_SETTINGS,
+ R592_FIFO_DMA_SETTINGS_EN);
+
+ /* This is only a precation */
+ r592_write_reg(dev, R592_FIFO_DMA,
+ dev->dummy_dma_page_physical_address);
+
+ r592_clear_reg_mask(dev, R592_REG_MSC, DMA_IRQ_EN_MASK);
+ r592_clear_reg_mask(dev, R592_REG_MSC, DMA_IRQ_ACK_MASK);
+ dev->dma_error = error;
+}
+
+/* Test if hardware supports DMA */
+static void r592_check_dma(struct r592_device *dev)
+{
+ dev->dma_capable = enable_dma &&
+ (r592_read_reg(dev, R592_FIFO_DMA_SETTINGS) &
+ R592_FIFO_DMA_SETTINGS_CAP);
+}
+
+/* Transfers fifo contents in/out using DMA */
+static int r592_transfer_fifo_dma(struct r592_device *dev)
+{
+ int len, sg_count;
+ bool is_write;
+
+ if (!dev->dma_capable || !dev->req->long_data)
+ return -EINVAL;
+
+ len = dev->req->sg.length;
+ is_write = dev->req->data_dir == WRITE;
+
+ if (len != R592_LFIFO_SIZE)
+ return -EINVAL;
+
+ dbg_verbose("doing dma transfer");
+
+ dev->dma_error = 0;
+ INIT_COMPLETION(dev->dma_done);
+
+ /* TODO: hidden assumption about nenth beeing always 1 */
+ sg_count = dma_map_sg(&dev->pci_dev->dev, &dev->req->sg, 1, is_write ?
+ PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
+
+ if (sg_count != 1 ||
+ (sg_dma_len(&dev->req->sg) < dev->req->sg.length)) {
+ message("problem in dma_map_sg");
+ return -EIO;
+ }
+
+ r592_start_dma(dev, is_write);
+
+ /* Wait for DMA completion */
+ if (!wait_for_completion_timeout(
+ &dev->dma_done, msecs_to_jiffies(1000))) {
+ message("DMA timeout");
+ r592_stop_dma(dev, -ETIMEDOUT);
+ }
+
+ dma_unmap_sg(&dev->pci_dev->dev, &dev->req->sg, 1, is_write ?
+ PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
+
+
+ return dev->dma_error;
+}
+
+/*
+ * Writes the FIFO in 4 byte chunks.
+ * If length isn't 4 byte aligned, rest of the data if put to a fifo
+ * to be written later
+ * Use r592_flush_fifo_write to flush that fifo when writing for the
+ * last time
+ */
+static void r592_write_fifo_pio(struct r592_device *dev,
+ unsigned char *buffer, int len)
+{
+ /* flush spill from former write */
+ if (!kfifo_is_empty(&dev->pio_fifo)) {
+
+ u8 tmp[4] = {0};
+ int copy_len = kfifo_in(&dev->pio_fifo, buffer, len);
+
+ if (!kfifo_is_full(&dev->pio_fifo))
+ return;
+ len -= copy_len;
+ buffer += copy_len;
+
+ copy_len = kfifo_out(&dev->pio_fifo, tmp, 4);
+ WARN_ON(copy_len != 4);
+ r592_write_reg_raw_be(dev, R592_FIFO_PIO, *(u32 *)tmp);
+ }
+
+ WARN_ON(!kfifo_is_empty(&dev->pio_fifo));
+
+ /* write full dwords */
+ while (len >= 4) {
+ r592_write_reg_raw_be(dev, R592_FIFO_PIO, *(u32 *)buffer);
+ buffer += 4;
+ len -= 4;
+ }
+
+ /* put remaining bytes to the spill */
+ if (len)
+ kfifo_in(&dev->pio_fifo, buffer, len);
+}
+
+/* Flushes the temporary FIFO used to make aligned DWORD writes */
+static void r592_flush_fifo_write(struct r592_device *dev)
+{
+ u8 buffer[4] = { 0 };
+ int len;
+
+ if (kfifo_is_empty(&dev->pio_fifo))
+ return;
+
+ len = kfifo_out(&dev->pio_fifo, buffer, 4);
+ r592_write_reg_raw_be(dev, R592_FIFO_PIO, *(u32 *)buffer);
+}
+
+/*
+ * Read a fifo in 4 bytes chunks.
+ * If input doesn't fit the buffer, it places bytes of last dword in spill
+ * buffer, so that they don't get lost on last read, just throw these away.
+ */
+static void r592_read_fifo_pio(struct r592_device *dev,
+ unsigned char *buffer, int len)
+{
+ u8 tmp[4];
+
+ /* Read from last spill */
+ if (!kfifo_is_empty(&dev->pio_fifo)) {
+ int bytes_copied =
+ kfifo_out(&dev->pio_fifo, buffer, min(4, len));
+ buffer += bytes_copied;
+ len -= bytes_copied;
+
+ if (!kfifo_is_empty(&dev->pio_fifo))
+ return;
+ }
+
+ /* Reads dwords from FIFO */
+ while (len >= 4) {
+ *(u32 *)buffer = r592_read_reg_raw_be(dev, R592_FIFO_PIO);
+ buffer += 4;
+ len -= 4;
+ }
+
+ if (len) {
+ *(u32 *)tmp = r592_read_reg_raw_be(dev, R592_FIFO_PIO);
+ kfifo_in(&dev->pio_fifo, tmp, 4);
+ len -= kfifo_out(&dev->pio_fifo, buffer, len);
+ }
+
+ WARN_ON(len);
+ return;
+}
+
+/* Transfers actual data using PIO. */
+static int r592_transfer_fifo_pio(struct r592_device *dev)
+{
+ unsigned long flags;
+
+ bool is_write = dev->req->tpc >= MS_TPC_SET_RW_REG_ADRS;
+ struct sg_mapping_iter miter;
+
+ kfifo_reset(&dev->pio_fifo);
+
+ if (!dev->req->long_data) {
+ if (is_write) {
+ r592_write_fifo_pio(dev, dev->req->data,
+ dev->req->data_len);
+ r592_flush_fifo_write(dev);
+ } else
+ r592_read_fifo_pio(dev, dev->req->data,
+ dev->req->data_len);
+ return 0;
+ }
+
+ local_irq_save(flags);
+ sg_miter_start(&miter, &dev->req->sg, 1, SG_MITER_ATOMIC |
+ (is_write ? SG_MITER_FROM_SG : SG_MITER_TO_SG));
+
+ /* Do the transfer fifo<->memory*/
+ while (sg_miter_next(&miter))
+ if (is_write)
+ r592_write_fifo_pio(dev, miter.addr, miter.length);
+ else
+ r592_read_fifo_pio(dev, miter.addr, miter.length);
+
+
+ /* Write last few non aligned bytes*/
+ if (is_write)
+ r592_flush_fifo_write(dev);
+
+ sg_miter_stop(&miter);
+ local_irq_restore(flags);
+ return 0;
+}
+
+/* Executes one TPC (data is read/written from small or large fifo) */
+static void r592_execute_tpc(struct r592_device *dev)
+{
+ bool is_write = dev->req->tpc >= MS_TPC_SET_RW_REG_ADRS;
+ int len, error;
+ u32 status, reg;
+
+ if (!dev->req) {
+ message("BUG: tpc execution without request!");
+ return;
+ }
+
+ len = dev->req->long_data ?
+ dev->req->sg.length : dev->req->data_len;
+
+ /* Ensure that FIFO can hold the input data */
+ if (len > R592_LFIFO_SIZE) {
+ message("IO: hardware doesn't support TPCs longer that 512");
+ error = -ENOSYS;
+ goto out;
+ }
+
+ if (!(r592_read_reg(dev, R592_REG_MSC) & R592_REG_MSC_PRSNT)) {
+ dbg("IO: refusing to send TPC because card is absent");
+ error = -ENODEV;
+ goto out;
+ }
+
+ dbg("IO: executing %s LEN=%d",
+ memstick_debug_get_tpc_name(dev->req->tpc), len);
+
+ /* Set IO direction */
+ if (is_write)
+ r592_set_reg_mask(dev, R592_IO, R592_IO_DIRECTION);
+ else
+ r592_clear_reg_mask(dev, R592_IO, R592_IO_DIRECTION);
+
+
+ error = r592_test_fifo_empty(dev);
+ if (error)
+ goto out;
+
+ /* Transfer write data */
+ if (is_write) {
+ error = r592_transfer_fifo_dma(dev);
+ if (error == -EINVAL)
+ error = r592_transfer_fifo_pio(dev);
+ }
+
+ if (error)
+ goto out;
+
+ /* Trigger the TPC */
+ reg = (len << R592_TPC_EXEC_LEN_SHIFT) |
+ (dev->req->tpc << R592_TPC_EXEC_TPC_SHIFT) |
+ R592_TPC_EXEC_BIG_FIFO;
+
+ r592_write_reg(dev, R592_TPC_EXEC, reg);
+
+ /* Wait for TPC completion */
+ status = R592_STATUS_RDY;
+ if (dev->req->need_card_int)
+ status |= R592_STATUS_CED;
+
+ error = r592_wait_status(dev, status, status);
+ if (error) {
+ message("card didn't respond");
+ goto out;
+ }
+
+ /* Test IO errors */
+ error = r592_test_io_error(dev);
+ if (error) {
+ dbg("IO error");
+ goto out;
+ }
+
+ /* Read data from FIFO */
+ if (!is_write) {
+ error = r592_transfer_fifo_dma(dev);
+ if (error == -EINVAL)
+ error = r592_transfer_fifo_pio(dev);
+ }
+
+ /* read INT reg. This can be shortened with shifts, but that way
+ its more readable */
+ if (dev->parallel_mode && dev->req->need_card_int) {
+
+ dev->req->int_reg = 0;
+ status = r592_read_reg(dev, R592_STATUS);
+
+ if (status & R592_STATUS_P_CMDNACK)
+ dev->req->int_reg |= MEMSTICK_INT_CMDNAK;
+ if (status & R592_STATUS_P_BREQ)
+ dev->req->int_reg |= MEMSTICK_INT_BREQ;
+ if (status & R592_STATUS_P_INTERR)
+ dev->req->int_reg |= MEMSTICK_INT_ERR;
+ if (status & R592_STATUS_P_CED)
+ dev->req->int_reg |= MEMSTICK_INT_CED;
+ }
+
+ if (error)
+ dbg("FIFO read error");
+out:
+ dev->req->error = error;
+ r592_clear_reg_mask(dev, R592_REG_MSC, R592_REG_MSC_LED);
+ return;
+}
+
+/* Main request processing thread */
+static int r592_process_thread(void *data)
+{
+ int error;
+ struct r592_device *dev = (struct r592_device *)data;
+ unsigned long flags;
+
+ while (!kthread_should_stop()) {
+ spin_lock_irqsave(&dev->io_thread_lock, flags);
+ set_current_state(TASK_INTERRUPTIBLE);
+ error = memstick_next_req(dev->host, &dev->req);
+ spin_unlock_irqrestore(&dev->io_thread_lock, flags);
+
+ if (error) {
+ if (error == -ENXIO || error == -EAGAIN) {
+ dbg_verbose("IO: done IO, sleeping");
+ } else {
+ dbg("IO: unknown error from "
+ "memstick_next_req %d", error);
+ }
+
+ if (kthread_should_stop())
+ set_current_state(TASK_RUNNING);
+
+ schedule();
+ } else {
+ set_current_state(TASK_RUNNING);
+ r592_execute_tpc(dev);
+ }
+ }
+ return 0;
+}
+
+/* Reprogram chip to detect change in card state */
+/* eg, if card is detected, arm it to detect removal, and vice versa */
+static void r592_update_card_detect(struct r592_device *dev)
+{
+ u32 reg = r592_read_reg(dev, R592_REG_MSC);
+ bool card_detected = reg & R592_REG_MSC_PRSNT;
+
+ dbg("update card detect. card state: %s", card_detected ?
+ "present" : "absent");
+
+ reg &= ~((R592_REG_MSC_IRQ_REMOVE | R592_REG_MSC_IRQ_INSERT) << 16);
+
+ if (card_detected)
+ reg |= (R592_REG_MSC_IRQ_REMOVE << 16);
+ else
+ reg |= (R592_REG_MSC_IRQ_INSERT << 16);
+
+ r592_write_reg(dev, R592_REG_MSC, reg);
+}
+
+/* Timer routine that fires 1 second after last card detection event, */
+static void r592_detect_timer(long unsigned int data)
+{
+ struct r592_device *dev = (struct r592_device *)data;
+ r592_update_card_detect(dev);
+ memstick_detect_change(dev->host);
+}
+
+/* Interrupt handler */
+static irqreturn_t r592_irq(int irq, void *data)
+{
+ struct r592_device *dev = (struct r592_device *)data;
+ irqreturn_t ret = IRQ_NONE;
+ u32 reg;
+ u16 irq_enable, irq_status;
+ unsigned long flags;
+ int error;
+
+ spin_lock_irqsave(&dev->irq_lock, flags);
+
+ reg = r592_read_reg(dev, R592_REG_MSC);
+ irq_enable = reg >> 16;
+ irq_status = reg & 0xFFFF;
+
+ /* Ack the interrupts */
+ reg &= ~irq_status;
+ r592_write_reg(dev, R592_REG_MSC, reg);
+
+ /* Get the IRQ status minus bits that aren't enabled */
+ irq_status &= (irq_enable);
+
+ /* Due to limitation of memstick core, we don't look at bits that
+ indicate that card was removed/inserted and/or present */
+ if (irq_status & (R592_REG_MSC_IRQ_INSERT | R592_REG_MSC_IRQ_REMOVE)) {
+
+ bool card_was_added = irq_status & R592_REG_MSC_IRQ_INSERT;
+ ret = IRQ_HANDLED;
+
+ message("IRQ: card %s", card_was_added ? "added" : "removed");
+
+ mod_timer(&dev->detect_timer,
+ jiffies + msecs_to_jiffies(card_was_added ? 500 : 50));
+ }
+
+ if (irq_status &
+ (R592_REG_MSC_FIFO_DMA_DONE | R592_REG_MSC_FIFO_DMA_ERR)) {
+ ret = IRQ_HANDLED;
+
+ if (irq_status & R592_REG_MSC_FIFO_DMA_ERR) {
+ message("IRQ: DMA error");
+ error = -EIO;
+ } else {
+ dbg_verbose("IRQ: dma done");
+ error = 0;
+ }
+
+ r592_stop_dma(dev, error);
+ complete(&dev->dma_done);
+ }
+
+ spin_unlock_irqrestore(&dev->irq_lock, flags);
+ return ret;
+}
+
+/* External inteface: set settings */
+static int r592_set_param(struct memstick_host *host,
+ enum memstick_param param, int value)
+{
+ struct r592_device *dev = memstick_priv(host);
+
+ switch (param) {
+ case MEMSTICK_POWER:
+ switch (value) {
+ case MEMSTICK_POWER_ON:
+ return r592_enable_device(dev, true);
+ case MEMSTICK_POWER_OFF:
+ return r592_enable_device(dev, false);
+ default:
+ return -EINVAL;
+ }
+ case MEMSTICK_INTERFACE:
+ switch (value) {
+ case MEMSTICK_SERIAL:
+ return r592_set_mode(dev, 0);
+ case MEMSTICK_PAR4:
+ return r592_set_mode(dev, 1);
+ default:
+ return -EINVAL;
+ }
+ default:
+ return -EINVAL;
+ }
+}
+
+/* External interface: submit requests */
+static void r592_submit_req(struct memstick_host *host)
+{
+ struct r592_device *dev = memstick_priv(host);
+ unsigned long flags;
+
+ if (dev->req)
+ return;
+
+ spin_lock_irqsave(&dev->io_thread_lock, flags);
+ if (wake_up_process(dev->io_thread))
+ dbg_verbose("IO thread woken to process requests");
+ spin_unlock_irqrestore(&dev->io_thread_lock, flags);
+}
+
+static const struct pci_device_id r592_pci_id_tbl[] = {
+
+ { PCI_VDEVICE(RICOH, 0x0592), },
+ { },
+};
+
+/* Main entry */
+static int r592_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ int error = -ENOMEM;
+ struct memstick_host *host;
+ struct r592_device *dev;
+
+ /* Allocate memory */
+ host = memstick_alloc_host(sizeof(struct r592_device), &pdev->dev);
+ if (!host)
+ goto error1;
+
+ dev = memstick_priv(host);
+ dev->host = host;
+ dev->pci_dev = pdev;
+ pci_set_drvdata(pdev, dev);
+
+ /* pci initialization */
+ error = pci_enable_device(pdev);
+ if (error)
+ goto error2;
+
+ pci_set_master(pdev);
+ error = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (error)
+ goto error3;
+
+ error = pci_request_regions(pdev, DRV_NAME);
+ if (error)
+ goto error3;
+
+ dev->mmio = pci_ioremap_bar(pdev, 0);
+ if (!dev->mmio)
+ goto error4;
+
+ dev->irq = pdev->irq;
+ spin_lock_init(&dev->irq_lock);
+ spin_lock_init(&dev->io_thread_lock);
+ init_completion(&dev->dma_done);
+ INIT_KFIFO(dev->pio_fifo);
+ setup_timer(&dev->detect_timer,
+ r592_detect_timer, (long unsigned int)dev);
+
+ /* Host initialization */
+ host->caps = MEMSTICK_CAP_PAR4;
+ host->request = r592_submit_req;
+ host->set_param = r592_set_param;
+ r592_check_dma(dev);
+
+ dev->io_thread = kthread_run(r592_process_thread, dev, "r592_io");
+ if (IS_ERR(dev->io_thread)) {
+ error = PTR_ERR(dev->io_thread);
+ goto error5;
+ }
+
+ /* This is just a precation, so don't fail */
+ dev->dummy_dma_page = pci_alloc_consistent(pdev, PAGE_SIZE,
+ &dev->dummy_dma_page_physical_address);
+ r592_stop_dma(dev , 0);
+
+ if (request_irq(dev->irq, &r592_irq, IRQF_SHARED,
+ DRV_NAME, dev))
+ goto error6;
+
+ r592_update_card_detect(dev);
+ if (memstick_add_host(host))
+ goto error7;
+
+ message("driver succesfully loaded");
+ return 0;
+error7:
+ free_irq(dev->irq, dev);
+error6:
+ if (dev->dummy_dma_page)
+ pci_free_consistent(pdev, PAGE_SIZE, dev->dummy_dma_page,
+ dev->dummy_dma_page_physical_address);
+
+ kthread_stop(dev->io_thread);
+error5:
+ iounmap(dev->mmio);
+error4:
+ pci_release_regions(pdev);
+error3:
+ pci_disable_device(pdev);
+error2:
+ memstick_free_host(host);
+error1:
+ return error;
+}
+
+static void r592_remove(struct pci_dev *pdev)
+{
+ int error = 0;
+ struct r592_device *dev = pci_get_drvdata(pdev);
+
+ /* Stop the processing thread.
+ That ensures that we won't take any more requests */
+ kthread_stop(dev->io_thread);
+
+ r592_enable_device(dev, false);
+
+ while (!error && dev->req) {
+ dev->req->error = -ETIME;
+ error = memstick_next_req(dev->host, &dev->req);
+ }
+ memstick_remove_host(dev->host);
+
+ free_irq(dev->irq, dev);
+ iounmap(dev->mmio);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ memstick_free_host(dev->host);
+
+ if (dev->dummy_dma_page)
+ pci_free_consistent(pdev, PAGE_SIZE, dev->dummy_dma_page,
+ dev->dummy_dma_page_physical_address);
+}
+
+#ifdef CONFIG_PM
+static int r592_suspend(struct device *core_dev)
+{
+ struct pci_dev *pdev = to_pci_dev(core_dev);
+ struct r592_device *dev = pci_get_drvdata(pdev);
+
+ r592_clear_interrupts(dev);
+ memstick_suspend_host(dev->host);
+ del_timer_sync(&dev->detect_timer);
+ return 0;
+}
+
+static int r592_resume(struct device *core_dev)
+{
+ struct pci_dev *pdev = to_pci_dev(core_dev);
+ struct r592_device *dev = pci_get_drvdata(pdev);
+
+ r592_clear_interrupts(dev);
+ r592_enable_device(dev, false);
+ memstick_resume_host(dev->host);
+ r592_update_card_detect(dev);
+ return 0;
+}
+
+SIMPLE_DEV_PM_OPS(r592_pm_ops, r592_suspend, r592_resume);
+#endif
+
+MODULE_DEVICE_TABLE(pci, r592_pci_id_tbl);
+
+static struct pci_driver r852_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = r592_pci_id_tbl,
+ .probe = r592_probe,
+ .remove = r592_remove,
+#ifdef CONFIG_PM
+ .driver.pm = &r592_pm_ops,
+#endif
+};
+
+static __init int r592_module_init(void)
+{
+ return pci_register_driver(&r852_pci_driver);
+}
+
+static void __exit r592_module_exit(void)
+{
+ pci_unregister_driver(&r852_pci_driver);
+}
+
+module_init(r592_module_init);
+module_exit(r592_module_exit);
+
+module_param(enable_dma, bool, S_IRUGO);
+MODULE_PARM_DESC(enable_dma, "Enable usage of the DMA (default)");
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug level (0-3)");
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Maxim Levitsky <maximlevitsky@xxxxxxxxx>");
+MODULE_DESCRIPTION("Ricoh R5C592 Memstick/Memstick PRO card reader driver");
diff --git a/drivers/memstick/host/r592.h b/drivers/memstick/host/r592.h
new file mode 100644
index 0000000..eee264e
--- /dev/null
+++ b/drivers/memstick/host/r592.h
@@ -0,0 +1,175 @@
+/*
+ * Copyright (C) 2010 - Maxim Levitsky
+ * driver for Ricoh memstick readers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef R592_H
+
+#include <linux/memstick.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/kfifo.h>
+#include <linux/ctype.h>
+
+/* write to this reg (number,len) triggers TPC execution */
+#define R592_TPC_EXEC 0x00
+#define R592_TPC_EXEC_LEN_SHIFT 16 /* Bits 16..25 are TPC len */
+#define R592_TPC_EXEC_BIG_FIFO (1 << 26) /* If bit 26 is set, large fifo is used (reg 48) */
+#define R592_TPC_EXEC_TPC_SHIFT 28 /* Bits 28..31 are the TPC number */
+
+
+/* Window for small TPC fifo (big endian)*/
+/* reads and writes always are done in 8 byte chunks */
+/* Not used in driver, because large fifo does better job */
+#define R592_SFIFO 0x08
+
+
+/* Status register (ms int, small fifo, IO)*/
+#define R592_STATUS 0x10
+ /* Parallel INT bits */
+#define R592_STATUS_P_CMDNACK (1 << 16) /* INT reg: NACK (parallel mode) */
+#define R592_STATUS_P_BREQ (1 << 17) /* INT reg: card ready (parallel mode)*/
+#define R592_STATUS_P_INTERR (1 << 18) /* INT reg: int error (parallel mode)*/
+#define R592_STATUS_P_CED (1 << 19) /* INT reg: command done (parallel mode) */
+
+ /* Fifo status */
+#define R592_STATUS_SFIFO_FULL (1 << 20) /* Small Fifo almost full (last chunk is written) */
+#define R592_STATUS_SFIFO_EMPTY (1 << 21) /* Small Fifo empty */
+
+ /* Error detection via CRC */
+#define R592_STATUS_SEND_ERR (1 << 24) /* Send failed */
+#define R592_STATUS_RECV_ERR (1 << 25) /* Recieve failed */
+
+ /* Card state */
+#define R592_STATUS_RDY (1 << 28) /* RDY signal recieved */
+#define R592_STATUS_CED (1 << 29) /* INT: Command done (serial mode)*/
+#define R592_STATUS_SFIFO_INPUT (1 << 30) /* Small fifo recieved data*/
+
+#define R592_SFIFO_SIZE 32 /* total size of small fifo is 32 bytes */
+#define R592_SFIFO_PACKET 8 /* packet size of small fifo */
+
+/* IO control */
+#define R592_IO 0x18
+#define R592_IO_16 (1 << 16) /* Set by default, can be cleared */
+#define R592_IO_18 (1 << 18) /* Set by default, can be cleared */
+#define R592_IO_SERIAL1 (1 << 20) /* Set by default, can be cleared, (cleared on parallel) */
+#define R592_IO_22 (1 << 22) /* Set by default, can be cleared */
+#define R592_IO_DIRECTION (1 << 24) /* TPC direction (1 write 0 read) */
+#define R592_IO_26 (1 << 26) /* Set by default, can be cleared */
+#define R592_IO_SERIAL2 (1 << 30) /* Set by default, can be cleared (cleared on parallel), serial doesn't work if unset */
+#define R592_IO_RESET (1 << 31) /* Reset, sets defaults*/
+
+
+/* Turns hardware on/off */
+#define R592_POWER 0x20 /* bits 0-7 writeable */
+#define R592_POWER_0 (1 << 0) /* set on start, cleared on stop - must be set*/
+#define R592_POWER_1 (1 << 1) /* set on start, cleared on stop - must be set*/
+#define R592_POWER_3 (1 << 3) /* must be clear */
+#define R592_POWER_20 (1 << 5) /* set before switch to parallel */
+
+/* IO mode*/
+#define R592_IO_MODE 0x24
+#define R592_IO_MODE_SERIAL 1
+#define R592_IO_MODE_PARALLEL 3
+
+
+/* IRQ,card detection,large fifo (first word irq status, second enable) */
+/* IRQs are ACKed by clearing the bits */
+#define R592_REG_MSC 0x28
+#define R592_REG_MSC_PRSNT (1 << 1) /* card present (only status)*/
+#define R592_REG_MSC_IRQ_INSERT (1 << 8) /* detect insert / card insered */
+#define R592_REG_MSC_IRQ_REMOVE (1 << 9) /* detect removal / card removed */
+#define R592_REG_MSC_FIFO_EMPTY (1 << 10) /* fifo is empty */
+#define R592_REG_MSC_FIFO_DMA_DONE (1 << 11) /* dma enable / dma done */
+
+#define R592_REG_MSC_FIFO_USER_ORN (1 << 12) /* set if software reads empty fifo (if R592_REG_MSC_FIFO_EMPTY is set) */
+#define R592_REG_MSC_FIFO_MISMATH (1 << 13) /* set if amount of data in fifo doesn't match amount in TPC */
+#define R592_REG_MSC_FIFO_DMA_ERR (1 << 14) /* IO failure */
+#define R592_REG_MSC_LED (1 << 15) /* clear to turn led off (only status)*/
+
+#define DMA_IRQ_ACK_MASK \
+ (R592_REG_MSC_FIFO_DMA_DONE | R592_REG_MSC_FIFO_DMA_ERR)
+
+#define DMA_IRQ_EN_MASK (DMA_IRQ_ACK_MASK << 16)
+
+#define IRQ_ALL_ACK_MASK 0x00007F00
+#define IRQ_ALL_EN_MASK (IRQ_ALL_ACK_MASK << 16)
+
+/* DMA address for large FIFO read/writes*/
+#define R592_FIFO_DMA 0x2C
+
+/* PIO access to large FIFO (512 bytes) (big endian)*/
+#define R592_FIFO_PIO 0x30
+#define R592_LFIFO_SIZE 512 /* large fifo size */
+
+
+/* large FIFO DMA settings */
+#define R592_FIFO_DMA_SETTINGS 0x34
+#define R592_FIFO_DMA_SETTINGS_EN (1 << 0) /* DMA enabled */
+#define R592_FIFO_DMA_SETTINGS_DIR (1 << 1) /* Dma direction (1 read, 0 write) */
+#define R592_FIFO_DMA_SETTINGS_CAP (1 << 24) /* Dma is aviable */
+
+/* Maybe just an delay */
+/* Bits 17..19 are just number */
+/* bit 16 is set, then bit 20 is waited */
+/* time to wait is about 50 spins * 2 ^ (bits 17..19) */
+/* seems to be possible just to ignore */
+/* Probably debug register */
+#define R592_REG38 0x38
+#define R592_REG38_CHANGE (1 << 16) /* Start bit */
+#define R592_REG38_DONE (1 << 20) /* HW set this after the delay */
+#define R592_REG38_SHIFT 17
+
+/* Debug register, written (0xABCDEF00) when error happens - not used*/
+#define R592_REG_3C 0x3C
+
+struct r592_device {
+ struct pci_dev *pci_dev;
+ struct memstick_host *host; /* host backpointer */
+ struct memstick_request *req; /* current request */
+
+ /* Registers, IRQ */
+ void __iomem *mmio;
+ int irq;
+ spinlock_t irq_lock;
+ spinlock_t io_thread_lock;
+ struct timer_list detect_timer;
+
+ struct task_struct *io_thread;
+ bool parallel_mode;
+
+ DECLARE_KFIFO(pio_fifo, u8, sizeof(u32));
+
+ /* DMA area */
+ int dma_capable;
+ int dma_error;
+ struct completion dma_done;
+ void *dummy_dma_page;
+ dma_addr_t dummy_dma_page_physical_address;
+
+};
+
+#define DRV_NAME "r592"
+
+
+#define message(format, ...) \
+ printk(KERN_INFO DRV_NAME ": " format "\n", ## __VA_ARGS__)
+
+#define __dbg(level, format, ...) \
+ do { \
+ if (debug >= level) \
+ printk(KERN_DEBUG DRV_NAME \
+ ": " format "\n", ## __VA_ARGS__); \
+ } while (0)
+
+
+#define dbg(format, ...) __dbg(1, format, ## __VA_ARGS__)
+#define dbg_verbose(format, ...) __dbg(2, format, ## __VA_ARGS__)
+#define dbg_reg(format, ...) __dbg(3, format, ## __VA_ARGS__)
+
+#endif
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/