Re: [PATCH] MTD: atmel_nand: Add DMA support to access Nandflash

From: Ryan Mallon
Date: Mon Jan 17 2011 - 17:42:04 EST


On 01/18/2011 09:15 AM, Ryan Mallon wrote:
> On 01/17/2011 08:20 PM, Hong Xu wrote:
>> Some SAM9 chips have the ability to perform DMA between CPU and SMC controller.
>> This patch adds DMA support for SAM9RL, SAM9G45, SSAM9G46,AM9M10, SAM9M11.

I'm trying to patch this into a 2.6.33 kernel running on a custom
SAM9G45 based board, but I get a failure requesting the DMA channel:

root@snapper:~$ dmesg | grep -i dma
[ 0.850000] atmel_nand atmel_nand: Failed to request DMA channel
[ 0.860000] atmel_nand atmel_nand: No DMA support for NAND access.
[ 1.530000] at_hdmac at_hdmac: Atmel AHB DMA Controller ( cpy slave ), 8 channels


It looks like the registration for the DMA controller happens after the
NAND driver probe and so the request is failing. I had a quick look, but
I can't see anything that would change this in more recent kernels. Any
ideas?

Also, I think you want to add the following for the atmel_nand Kconfig:
select AT_HDMAC

or make the DMA parts of the driver ifdef CONFIG_AT_HDMAC (if the above
won't work for some reason) since you will get build errors on the
dmaengine functions otherwise.

~Ryan

--
Bluewater Systems Ltd - ARM Technology Solution Centre

Ryan Mallon 5 Amuri Park, 404 Barbadoes St
ryan@xxxxxxxxxxxxxxxx PO Box 13 889, Christchurch 8013
http://www.bluewatersys.com New Zealand
Phone: +64 3 3779127 Freecall: Australia 1800 148 751
Fax: +64 3 3779135 USA 1800 261 2934

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/