[PATCH] MIPS: JZ4740: Set nand ecc offsets for the qi_lb60 board

From: Lars-Peter Clausen
Date: Mon Feb 07 2011 - 21:42:34 EST


The jz4740 nand driver now requires that the ecc offsets are set.

Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx>

---
This should go into 2.6.38
---
arch/mips/jz4740/board-qi_lb60.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index e3f21ba..34f5227 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -50,14 +50,14 @@ static bool is_avt2;

/* NAND */
static struct nand_ecclayout qi_lb60_ecclayout_1gb = {
-/* .eccbytes = 36,
+ .eccbytes = 36,
.eccpos = {
6, 7, 8, 9, 10, 11, 12, 13,
14, 15, 16, 17, 18, 19, 20, 21,
22, 23, 24, 25, 26, 27, 28, 29,
30, 31, 32, 33, 34, 35, 36, 37,
38, 39, 40, 41
- },*/
+ },
.oobfree = {
{ .offset = 2, .length = 4 },
{ .offset = 42, .length = 22 }
@@ -86,7 +86,7 @@ static struct mtd_partition qi_lb60_partitions_1gb[] = {
};

static struct nand_ecclayout qi_lb60_ecclayout_2gb = {
-/* .eccbytes = 72,
+ .eccbytes = 72,
.eccpos = {
12, 13, 14, 15, 16, 17, 18, 19,
20, 21, 22, 23, 24, 25, 26, 27,
@@ -97,7 +97,7 @@ static struct nand_ecclayout qi_lb60_ecclayout_2gb = {
60, 61, 62, 63, 64, 65, 66, 67,
68, 69, 70, 71, 72, 73, 74, 75,
76, 77, 78, 79, 80, 81, 82, 83
- },*/
+ },
.oobfree = {
{ .offset = 2, .length = 10 },
{ .offset = 84, .length = 44 },
--
1.7.2.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/