[PATCH 8/8] pch_uart: Fix DMA channel miss-setting issue.

From: Tomoya MORINAGA
Date: Thu Feb 17 2011 - 21:23:31 EST


Signed-off-by: Tomoya MORINAGA <tomoya-linux@xxxxxxxxxxxxxxx>
---
drivers/serial/pch_uart.c | 59 +++++++++++++++++++++++++++++++++++---------
1 files changed, 47 insertions(+), 12 deletions(-)

diff --git a/drivers/serial/pch_uart.c b/drivers/serial/pch_uart.c
index da0ba0f..a5ce9a5 100644
--- a/drivers/serial/pch_uart.c
+++ b/drivers/serial/pch_uart.c
@@ -235,6 +235,36 @@ struct eg20t_port {
dma_addr_t rx_buf_dma;
};

+/**
+ * struct pch_uart_driver_data - private data structure for UART-DMA
+ * @port_type: The number of DMA channel
+ * @line_no: UART port line number (0, 1, 2...)
+ */
+struct pch_uart_driver_data {
+ int port_type;
+ int line_no;
+};
+
+enum pch_uart_num_t {
+ pch_et20t_uart0 = 0,
+ pch_et20t_uart1,
+ pch_et20t_uart2,
+ pch_et20t_uart3,
+ pch_ml7213_uart0,
+ pch_ml7213_uart1,
+ pch_ml7213_uart2,
+};
+
+static struct pch_uart_driver_data drv_dat[] = {
+ [pch_et20t_uart0] = {PCH_UART_8LINE, 0},
+ [pch_et20t_uart1] = {PCH_UART_2LINE, 1},
+ [pch_et20t_uart2] = {PCH_UART_2LINE, 2},
+ [pch_et20t_uart3] = {PCH_UART_2LINE, 3},
+ [pch_ml7213_uart0] = {PCH_UART_8LINE, 0},
+ [pch_ml7213_uart1] = {PCH_UART_2LINE, 1},
+ [pch_ml7213_uart2] = {PCH_UART_2LINE, 2},
+};
+
static unsigned int default_baud = 9600;
static const int trigger_level_256[4] = { 1, 64, 128, 224 };
static const int trigger_level_64[4] = { 1, 16, 32, 56 };
@@ -568,7 +598,8 @@ static void pch_request_dma(struct uart_port *port)
/* Set Tx DMA */
param = &priv->param_tx;
param->dma_dev = &dma_dev->dev;
- param->chan_id = priv->port.line;
+ param->chan_id = priv->port.line * 2; /* Tx = 0, 2, 4, ... */
+
param->tx_reg = port->mapbase + UART_TX;
chan = dma_request_channel(mask, filter, param);
if (!chan) {
@@ -581,7 +612,8 @@ static void pch_request_dma(struct uart_port *port)
/* Set Rx DMA */
param = &priv->param_rx;
param->dma_dev = &dma_dev->dev;
- param->chan_id = priv->port.line + 1; /* Rx = Tx + 1 */
+ param->chan_id = priv->port.line * 2 + 1; /* Rx = Tx + 1 */
+
param->rx_reg = port->mapbase + UART_RX;
chan = dma_request_channel(mask, filter, param);
if (!chan) {
@@ -1358,8 +1390,11 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
unsigned int mapbase;
unsigned char *rxbuf;
int fifosize, base_baud;
- static int num;
- int port_type = id->driver_data;
+ int port_type;
+ struct pch_uart_driver_data *board;
+
+ board = &drv_dat[id->driver_data];
+ port_type = board->port_type;

priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL);
if (priv == NULL)
@@ -1404,7 +1439,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
priv->port.ops = &pch_uart_ops;
priv->port.flags = UPF_BOOT_AUTOCONF;
priv->port.fifosize = fifosize;
- priv->port.line = num++;
+ priv->port.line = board->line_no;
priv->trigger = PCH_UART_HAL_TRIGGER_M;

spin_lock_init(&priv->port.lock);
@@ -1482,19 +1517,19 @@ static int pch_uart_pci_resume(struct pci_dev *pdev)

static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811),
- .driver_data = PCH_UART_8LINE},
+ .driver_data = pch_et20t_uart0},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812),
- .driver_data = PCH_UART_2LINE},
+ .driver_data = pch_et20t_uart1},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8813),
- .driver_data = PCH_UART_2LINE},
+ .driver_data = pch_et20t_uart2},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814),
- .driver_data = PCH_UART_2LINE},
+ .driver_data = pch_et20t_uart3},
{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8027),
- .driver_data = PCH_UART_8LINE},
+ .driver_data = pch_ml7213_uart0},
{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8028),
- .driver_data = PCH_UART_2LINE},
+ .driver_data = pch_ml7213_uart1},
{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8029),
- .driver_data = PCH_UART_2LINE},
+ .driver_data = pch_ml7213_uart2},
{0,},
};

--
1.7.3.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/