Re: [PATCH] rt2x00: Use ops name instead of device name

[Steven Rostedt]

On Tue, 2011-02-22 at 20:33 +0100, Ivo Van Doorn wrote:
> Hi,
> 
> On Tue, Feb 22, 2011 at 2:44 PM, Steven Rostedt <rostedt@xxxxxxxxxxx> wrote:
> > On Tue, 2011-02-22 at 13:34 +0000, Ben Hutchings wrote:
> >
> >> > 19:   73474106          0   IO-APIC-fasteoi   ata_piix, uhci_hcd:usb6, 0000:05:01.0
> >
> >> >     rt2x00dev->irq = pci_dev->irq;
> >> > -   rt2x00dev->name = pci_name(pci_dev);
> >> > +   rt2x00dev->name = ops->name;
> >
> >
> >> But then how can users distinguish the IRQs for multiple devices handled
> >> by the same driver?  (Probably unusual for WLAN devices, but still
> >> possible.)
> >>
> >> I assume you can't use a net device name as there may be multiple net
> >> devices per bus device?
> >
> > Honestly, I do not know this code well enough, but this patch seemed to
> > solve the problem at hand. Hence I sent it out to the experts hoping
> > they either take this patch or come up with a proper solution ;)
> >
> > In any case, just posting the pci address is not a pretty answer.
> 
> I just checked the other wireless drivers, and they all seem to use
> the modulename. So I guess your patch is correct. You can add my:
> 
> Acked-by: Ivo van Doorn <IvDoorn@xxxxxxxxx>

Thanks!

Actually, to answer Ben's question. lspci should give you what you want.

On my local box (not the one mentioned above):

$ lspci -vv
[...]
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
        Subsystem: Tyan Computer Tomcat K8E (S2865)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
        Latency: 0 (250ns min, 5000ns max)

        Interrupt: pin A routed to IRQ 23

        Region 0: Memory at febf9000 (32-bit, non-prefetchable) [size=4K]
        Region 1: I/O ports at b400 [size=8]
        Capabilities: <access denied>
        Kernel driver in use: forcedeth


(spaces added by me)

$ cat /proc/interrupts
[...]
 23:        547     648564   IO-APIC-fasteoi   ohci_hcd:usb2, eth0


-- Steve

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/