Re: [PATCH] tpm_tis: Re-enable interrupts upon resume

[Jiri Slaby]

On 02/22/2011 08:49 PM, Stefan Berger wrote:
> Below patch applies to the tip of the git tree.
> 
> This patch makes sure that if the TPM TIS interface is run in interrupt
> mode (rather than polling mode) that the interrupts are enabled in the
> TPM's interrupt enable register which may either have been cleared by
> the TPM's TIS loosing its state during device sleep in ACPI S3 (suspend)
> or by the BIOS, which upon resume sends a TPM_Startup() command to the
> TPM, and may run the TPM in polling mode and leave the TIS interrupts
> disabled once it transfers control to the OS again.
> 
> Problem is, I don't currently have a machine running the TPM in
> interrupt mode. I found this through a self-built TPM device model for
> Qemu and SeaBIOS patches, where this does resolve a problem upon resume.
> 
> You may want to check if your TPM runs with interrupts by doing
> 
> cat /proc/interrupts | grep -i tpm

No, this is empty output.

regards,
-- 
js
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/