[20/78] ath9k_hw: Fix incorrect macversion and macrev checks

[Greg KH]

2.6.38-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Senthil Balasubramanian <senthilkumar@xxxxxxxxxxx>

commit ac45c12dfb3f727a5a7a3332ed9c11b4a5ab287e upstream.

There are few places where we are checking for macversion and revsions
before RTC is powered ON. However we are reading the macversion and
revisions only after RTC is powered ON and so both macversion and
revisions are actully zero and this leads to incorrect srev checks

Incorrect srev checks can cause registers to be configured wrongly and can
cause unexpected behavior. Fixing this seems to address the ASPM issue that
we have observed. The laptop becomes very slow and hangs mostly with ASPM L1
enabled without this fix.

fix this by reading the macversion and revisisons even before we start
using them. There is no reason why should we delay reading this info
until RTC is powered on as this is just a register information.

Signed-off-by: Senthil Balasubramanian <senthilkumar@xxxxxxxxxxx>
Signed-off-by: John W. Linville <linville@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>

---
 drivers/net/wireless/ath/ath9k/hw.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -504,6 +504,8 @@ static int __ath9k_hw_init(struct ath_hw
 	ah->WARegVal |= (AR_WA_D3_L1_DISABLE |
 			 AR_WA_ASPM_TIMER_BASED_DISABLE);
 
+	ath9k_hw_read_revisions(ah);
+
 	if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_POWER_ON)) {
 		ath_err(common, "Couldn't reset chip\n");
 		return -EIO;
@@ -1083,8 +1085,6 @@ static bool ath9k_hw_set_reset_power_on(
 		return false;
 	}
 
-	ath9k_hw_read_revisions(ah);
-
 	return ath9k_hw_set_reset(ah, ATH9K_RESET_WARM);
 }
 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/