[GIT PULL] fbdev updates for 2.6.39-rc1, part 2.

From: Paul Mundt
Date: Wed Mar 23 2011 - 08:28:26 EST

Next message: Sergey Senozhatsky: "[PATCH] lockdep: remove unused factor variable fromlockdep_stats_show"
Previous message: Harry Wei: "Re: [PATCH]Clean up CodingStyle for scripts/kconfig/gconf.c"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Here's the second batch of fbdev updates. The bulk of this is OMAP DSS
churn that had some dependencies on both the ARM and OMAP merges that
have since settled. The rest is basically random fixes, svgalib
modernization, and the usual smattering of driver updates.

This does not yet include Andy Whitcroft's registration locking or the
suspend/resume console locking fixes as we still need to make a few
changes and do some more testing (as well as getting confirmation that
things still work in both cases). My intention is to have that sorted out
for -rc2.

I noticed a few other fb drivers and churn popped up from various other
trees, but that should hopefully begin to slow down now that things are
for the most part being centrally maintained (the bulk of the ARM SoC trees
for example seem to prefer to lump all of their driver changes together
rather than going through subsystem trees -- basically all of them but
OMAP and SH/R-Mobile, but in general folks have been pretty good with
making sure patches still hit the lists and at least have some tentative
review, as with the unicore32 merge).

Please pull from:

master.kernel.org:/pub/scm/linux/kernel/git/lethal/fbdev-2.6.git

Which contains:

Aaro Koskinen (6):
sisfb: POST should fail if R/W test fails
sisfb: move XGI POST RAM type detection into a subroutine
sisfb: add subroutine for detecting XGI Z9
sisfb: add RAM type detection for XGI Z9
sisfb: move XGI POST DDR2 bootup code into subroutines
sisfb: add support for XGI Z9 DDR2 POST

Andreas Bießmann (2):
atmel_lcdfb: implement inverted contrast pwm
atmel_lcdfb: add fb_blank function

Archit Taneja (15):
OMAP2PLUS: DSS2: Generalize naming of PRCM related clock enums in DSS driver
OMAP2PLUS: DSS2: Generalize external clock names in struct dss of dss.c
OMAP: DSS2: Have separate irq handlers for DISPC and DSI
OMAP2PLUS: DSS2: FEATURES: DISPC overlay code cleanup
OMAP2PLUS: DSS2: FEATURES: Function to Provide the max fck supported
OMAP2PLUS: DSS2: Make members of dss_clk_source generic
OMAP2PLUS: DSS2: Use dss features to get clock source names of current OMAP
OMAP2PLUS: DSS2: DSI: Generalize DSI PLL Clock Naming
OMAP: DSS2: Functions to request/release DSI VCs
OMAP: DSS2: Use request / release calls in Taal for DSI Virtual Channels.
OMAP2PLUS: DSS2: Cleanup clock source related code
OMAP4: DSS2: Clock source changes for OMAP4
OMAP2PLUS: DSS2: FEATURES: Fix usage of dss_reg_field and dss_clk_source_name
OMAP: DSS2: FEATURES: Functions to return min and max values of parameters
OMAP: DSS2: FEATURES: DSI PLL parameter cleanup

Axel Lin (7):
video: hpfb: use resource_size()
video: sh7760fb: use resource_size()
video: ffb: fix ffb_probe error path
video: s3c-fb: return proper error if clk_get fails
video: hecubafb: add __devexit_p around reference to hecubafb_remove
video: metronomefb: add __devexit_p around reference to metronomefb_remove
video: add missing framebuffer_release in error path

Dan Carpenter (1):
fbdev: sh_mobile_lcdc: checking NULL instead of IS_ERR()

Dave Airlie (1):
fbcon: fix situation where fbcon gets deinitialised and can't reinit.

David Miller (22):
svga: Use proper VGA register name macros in svga_wattr.
svga: Make svga_wattr take an iomem regbase pointer.
svga: Make svga_wcrt_multi take an iomem regbase pointer.
svga: Make svga_wseq_multi take an iomem regbase pointer.
svga: Make svga_set_default_gfx_regs take an iomem regbase pointer.
svga: Make svga_set_default_atc_regs take an iomem regbase pointer.
svga: Make svga_set_default_seq_regs take an iomem regbase pointer.
svga: Make svga_wseq_mask() take an iomem regbase pointer.
svga: Make svga_wcrt_mask() take an iomem regbase pointer.
svga: Make svga_set_default_crt_regs() take an iomem regbase pointer.
svga: Make svga_set_textmode_vga_regs() take an iomem regbase pointer.
svga: Make svga_tilecursor() take an iomem regbase pointer.
svga: Make svga_set_timings() take an iomem regbase pointer.
arkfb: Pass par->state.vgabase to vga_*() calls.
s3fb: Pass par->state.vgabase to vga_*() calls.
vt8623fb: Pass par->state.vgabase to vga_*() calls.
arkfb: Don't clobber par->state.vgabase during open method.
s3fb: Don't clobber par->state.vgabase during open method.
vt8623fb: Don't clobber par->state.vgabase during open method.
s3fb: Compute VGA base iomem pointer explicitly.
arkfb: Compute VGA base iomem pointer explicitly.
vt8623fb: Compute VGA base iomem pointer explicitly.

Heiko Schocher (3):
video, sm501: add I/O functions for use on powerpc
video, sm501: add edid and commandline support
video, sm501: add OF binding to support SM501

Henry Nestler (1):
fbcon: Bugfix soft cursor detection in Tile Blitting

Jani Nikula (1):
OMAP: DSS2: Fix def_disp module param description

Jarkko Nikula (1):
omapfb: Fix linker error in drivers/video/omap/lcd_2430sdp.c

Jean Delvare (1):
radeonfb: Let hwmon driver probe the "monid" I2C bus

Justin P. Mattock (1):
drivers:video:aty:radeon_base Fix typo occationally to occasionally

Kirill A. Shutemov (2):
omap: use list_move() instead of list_del()/list_add() combination
vmlfb: use list_move() instead of list_del()/list_add() combination

Martin Decky (1):
video: Fix EDID macros H_SYNC_WIDTH and H_SYNC_OFFSET

Mayuresh Janorkar (4):
OMAP2PLUS: DSS2: Add OMAP4 Kconfig support
OMAP4: DSS2: Add hwmod device names for OMAP4.
OMAPFB: Adding a check for timings in set_def_mode
OMAP: OMAPFB: Adding help for FB_OMAP_LCD_VGA option

Murthy, Raghuveer (5):
OMAP: DSS2: Adding dss_features for independent core clk divider
OMAP: DSS2: Renaming register macro DISPC_DIVISOR(ch)
OMAP4: DSS2: Using dss_features to set independent core clock divider
OMAP: DSS2: Implement OMAP4 DSS fclk support
OMAP4: PandaBoard: Adding DVI support

Mythri P K (10):
OMAP4: DSS2: Add display type HDMI to DSS2
OMAP4: DSS2: HDMI: Select between HDMI VENC clock source.
OMAP4: DSS2: HDMI: Dispc gamma enable set/reset function for TV.
OMAP4: DSS2: HDMI: HDMI driver header file addition
OMAP4: DSS2: HDMI: HDMI driver addition in the DSS
OMAP4: DSS2: HDMI: HDMI panel driver addition in the DSS
OMAP4: DSS2: HDMI: Add makefile and kconfig changes to enable HDMI in OMAP4
OMAP4: DSS: HDMI: Call to HDMI module init to register driver.
OMAP4: HDMI: Add HDMI structure in the board file for OMAP4 SDP
OMAP4: HDMI: Add HDMI structure in the board file for OMAP4 PANDA

Ondrej Zary (5):
s3fb: maximize virtual vertical size for fast scrolling
s3fb: add support for 86C365 Trio3D
s3fb: fix 15/16bpp modes with over 115MHz pixclocks on 86C365 Trio3D
s3fb: enable DTPC
s3fb: use new start address register

Paul Mundt (4):
mailmap: Update for OMAP DSS developers.
video: Move sm501fb devicetree binding documentation to a better place.
MAINTAINERS: Add file pattern for fb dt bindings.
MAINTAINERS: de-orphan fbdev.

Samreen (1):
OMAP2/3/4: DSS2: Enable Display SubSystem as modules

Senthilvadivu Guruswamy (9):
OMAP2,3: DSS2: Build omap_device for each DSS HWIP
OMAP2, 3: DSS2: DSS: create platform_driver, move init, exit to driver
OMAP2, 3: DSS2: Move clocks from core driver to dss driver
OMAP2, 3: DSS2: RFBI: create platform_driver, move init, exit to driver
OMAP2, 3: DSS2: DISPC: create platform_driver, move init, exit to driver
OMAP2, 3: DSS2: VENC: create platform_driver, move init, exit to driver
OMAP2, 3: DSS2: DSI: create platform_driver, move init, exit to driver
OMAP2,3: DSS2: Use platform device to get baseaddr
OMAP2,3: DSS2: Get DSS IRQ from platform device

Steve Sakoman (5):
OMAP: DSS2: Add support for LG Philips LB035Q02 panel
OMAP: DSS2: Add DSS2 support for Overo
omap: overo: Add regulator for ads7846
OMAP: Add gpio-leds support for Overo
OMAP: Add gpio-keys support for Overo

Sumit Semwal (6):
OMAP2, 3: DSS2: remove forced clk-disable from omap_dss_remove
OMAP2,3: DSS2: replace printk with dev_dbg in init
OMAP2PLUS: clocks: Align DSS clock names and roles
OMAP4: DSS2: clocks: Add ick as dummy clock
OMAP2PLUS:DSS2: add opt_clock_available in pdata
OMAP2PLUS:DSS2: Use opt_clock_available from pdata

Thomas Schlichter (1):
uvesafb,vesafb: create WC or WB PAT-entries

Tomi Valkeinen (25):
OMAP: 3430SDP: Remove unused vdda_dac supply
OMAP: DSS2: Delay regulator_get() calls
OMAP: DSS2: Support for Samsung LTE430WQ-F0C
MAINTAINERS: Update OMAP DSS maintainer
OMAP: DSS2: Clean up a switch-case
OMAP: DSS2: FEATURES: Remove SDI from 3630 displays
OMAP: DSS2: FEATURES: Remove DSI & SDI from OMAP2
OMAP: DSS2: Check for SDI HW before accessing SDI registers
OMAP: DSS2: Remove unused list
OMAP: DSS2: DSI: remove unused function
OMAP: DSS2: Remove FB_OMAP_BOOTLOADER_INIT support
OMAP: DSS2: Remove pdev argument from dpi_init
OMAP: DSS2: Move DPI & SDI init into DSS plat driver
OMAP: DSS2: Remove unneeded cpu_is_xxx checks
HACK: OMAP: DSS2: Fix OMAP2_DSS_USE_DSI_PLL
HACK: OMAP: DSS2: add delay after enabling clocks
OMAP: DSS2: fix omap_dispc_register_isr() fail path
HACK: OMAP: DSS2: VENC: disable VENC on OMAP4 to prevent crash
OMAP: DSS2: DSI: Restructure IRQ handler
OMAP: DSS2: DSI: Add ISR support
OMAP: DSS2: DSI: use ISR in send_bta_sync
OMAP: DSS2: DSI: use ISR for BTA in framedone
OMAP: DSS2: DSI: catch DSI errors in send_bta_sync
OMAP: DSS2: DSI: fix IRQ debug prints
OMAP: DSS2: Clean up for dpll4_m4_ck handling

.mailmap | 4 +
Documentation/devicetree/bindings/fb/sm501fb.txt | 34 +
Documentation/fb/sm501.txt | 10 +
MAINTAINERS | 8 +-
arch/arm/configs/omap2plus_defconfig | 11 +
arch/arm/mach-omap2/board-3430sdp.c | 6 +-
arch/arm/mach-omap2/board-4430sdp.c | 75 ++
arch/arm/mach-omap2/board-cm-t35.c | 2 +-
arch/arm/mach-omap2/board-devkit8000.c | 12 +-
arch/arm/mach-omap2/board-igep0020.c | 10 +-
arch/arm/mach-omap2/board-omap3beagle.c | 12 +-
arch/arm/mach-omap2/board-omap3evm.c | 12 +-
arch/arm/mach-omap2/board-omap3pandora.c | 3 +-
arch/arm/mach-omap2/board-omap3stalker.c | 12 +-
arch/arm/mach-omap2/board-omap4panda.c | 203 +++-
arch/arm/mach-omap2/board-overo.c | 357 +++++-
arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +-
arch/arm/mach-omap2/board-zoom-peripherals.c | 12 +-
arch/arm/mach-omap2/clock2420_data.c | 8 +-
arch/arm/mach-omap2/clock2430_data.c | 8 +-
arch/arm/mach-omap2/clock3xxx_data.c | 14 +-
arch/arm/mach-omap2/clock44xx_data.c | 15 +-
arch/arm/mach-omap2/display.c | 80 ++
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 13 +-
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 12 +-
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 23 +-
arch/arm/plat-omap/include/plat/display.h | 15 +-
drivers/gpu/drm/radeon/radeon_legacy_crtc.c | 2 +-
drivers/mfd/sm501.c | 134 +-
drivers/video/arkfb.c | 160 ++-
drivers/video/atmel_lcdfb.c | 31 +-
drivers/video/aty/radeon_base.c | 2 +-
drivers/video/aty/radeon_i2c.c | 3 +
drivers/video/cg14.c | 1 +
drivers/video/cg6.c | 1 +
drivers/video/console/fbcon.c | 4 +-
drivers/video/console/tileblit.c | 2 +-
drivers/video/edid.h | 4 +-
drivers/video/ffb.c | 2 +-
drivers/video/hecubafb.c | 2 +-
drivers/video/hpfb.c | 6 +-
drivers/video/metronomefb.c | 2 +-
drivers/video/omap/Kconfig | 7 +-
drivers/video/omap/blizzard.c | 3 +-
drivers/video/omap/hwa742.c | 3 +-
drivers/video/omap2/displays/Kconfig | 6 +
drivers/video/omap2/displays/Makefile | 1 +
drivers/video/omap2/displays/panel-generic-dpi.c | 25 +
.../omap2/displays/panel-lgphilips-lb035q02.c | 279 ++++
drivers/video/omap2/displays/panel-taal.c | 123 +-
drivers/video/omap2/dss/Kconfig | 14 +-
drivers/video/omap2/dss/Makefile | 2 +
drivers/video/omap2/dss/core.c | 480 +-------
drivers/video/omap2/dss/dispc.c | 335 ++++--
drivers/video/omap2/dss/display.c | 35 +-
drivers/video/omap2/dss/dpi.c | 45 +-
drivers/video/omap2/dss/dsi.c | 967 +++++++++++----
drivers/video/omap2/dss/dss.c | 763 +++++++++--
drivers/video/omap2/dss/dss.h | 153 ++-
drivers/video/omap2/dss/dss_features.c | 163 ++-
drivers/video/omap2/dss/dss_features.h | 27 +
drivers/video/omap2/dss/hdmi.c | 1332 ++++++++++++++++++++
drivers/video/omap2/dss/hdmi.h | 415 ++++++
drivers/video/omap2/dss/hdmi_omap4_panel.c | 222 ++++
drivers/video/omap2/dss/manager.c | 13 +-
drivers/video/omap2/dss/overlay.c | 10 +-
drivers/video/omap2/dss/rfbi.c | 128 ++-
drivers/video/omap2/dss/sdi.c | 62 +-
drivers/video/omap2/dss/venc.c | 128 ++-
drivers/video/omap2/omapfb/Kconfig | 6 +-
drivers/video/omap2/omapfb/omapfb-main.c | 23 +-
drivers/video/s3c-fb.c | 1 +
drivers/video/s3fb.c | 341 +++--
drivers/video/sh7760fb.c | 4 +-
drivers/video/sh_mobile_lcdcfb.c | 5 +-
drivers/video/sis/sis.h | 1 +
drivers/video/sis/sis_main.c | 315 ++++--
drivers/video/sis/vgatypes.h | 1 +
drivers/video/sm501fb.c | 275 +++--
drivers/video/svgalib.c | 175 ++--
drivers/video/tcx.c | 1 +
drivers/video/uvesafb.c | 49 +-
drivers/video/vermilion/vermilion.c | 3 +-
drivers/video/vesafb.c | 44 +-
drivers/video/vt8623fb.c | 157 ++-
include/linux/sm501.h | 8 +
include/linux/svga.h | 34 +-
include/video/atmel_lcdc.h | 1 +
88 files changed, 6494 insertions(+), 2020 deletions(-)
create mode 100644 Documentation/devicetree/bindings/fb/sm501fb.txt
create mode 100644 Documentation/fb/sm501.txt
create mode 100644 drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
create mode 100644 drivers/video/omap2/dss/hdmi.c
create mode 100644 drivers/video/omap2/dss/hdmi.h
create mode 100644 drivers/video/omap2/dss/hdmi_omap4_panel.c
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Sergey Senozhatsky: "[PATCH] lockdep: remove unused factor variable fromlockdep_stats_show"
Previous message: Harry Wei: "Re: [PATCH]Clean up CodingStyle for scripts/kconfig/gconf.c"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]