[PATCH 1/5] staging/keucr: init use pr_<level> for messages
From: Cho, Yu-Chen
Date: Fri Apr 01 2011 - 02:41:26 EST
init.c use pr_<level> for messages
Signed-off-by: Cho, Yu-Chen <acho@xxxxxxxxxx>
---
drivers/staging/keucr/init.c | 95 ++++++++++++++++++++---------------------
1 files changed, 46 insertions(+), 49 deletions(-)
diff --git a/drivers/staging/keucr/init.c b/drivers/staging/keucr/init.c
index 5c01f28..0727de8 100644
--- a/drivers/staging/keucr/init.c
+++ b/drivers/staging/keucr/init.c
@@ -1,3 +1,5 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/slab.h>
@@ -22,13 +24,13 @@ int ENE_InitMedia(struct us_data *us)
int result;
BYTE MiscReg03 = 0;
- printk(KERN_INFO "--- Init Media ---\n");
+ pr_info("--- Init Media ---\n");
result = ENE_Read_BYTE(us, REG_CARD_STATUS, &MiscReg03);
if (result != USB_STOR_XFER_GOOD) {
- printk(KERN_ERR "Read register fail !!\n");
+ pr_err("Read register fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
- printk(KERN_INFO "MiscReg03 = %x\n", MiscReg03);
+ pr_info("MiscReg03 = %x\n", MiscReg03);
if (MiscReg03 & 0x02) {
if (!us->SM_Status.Ready && !us->MS_Status.Ready) {
@@ -74,10 +76,10 @@ int ENE_MSInit(struct us_data *us)
BYTE buf[0x200];
WORD MSP_BlockSize, MSP_UserAreaBlocks;
- printk(KERN_INFO "transport --- ENE_MSInit\n");
+ pr_info("transport --- ENE_MSInit\n");
result = ENE_LoadBinCode(us, MS_INIT_PATTERN);
if (result != USB_STOR_XFER_GOOD) {
- printk(KERN_ERR "Load MS Init Code Fail !!\n");
+ pr_err("Load MS Init Code Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
@@ -90,18 +92,18 @@ int ENE_MSInit(struct us_data *us)
result = ENE_SendScsiCmd(us, FDIR_READ, &buf, 0);
if (result != USB_STOR_XFER_GOOD) {
- printk(KERN_ERR "Exection MS Init Code Fail !!\n");
+ pr_err("Exection MS Init Code Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
us->MS_Status = *(PMS_STATUS)&buf[0];
if (us->MS_Status.Insert && us->MS_Status.Ready) {
- printk(KERN_INFO "Insert = %x\n", us->MS_Status.Insert);
- printk(KERN_INFO "Ready = %x\n", us->MS_Status.Ready);
- printk(KERN_INFO "IsMSPro = %x\n", us->MS_Status.IsMSPro);
- printk(KERN_INFO "IsMSPHG = %x\n", us->MS_Status.IsMSPHG);
- printk(KERN_INFO "WtP = %x\n", us->MS_Status.WtP);
+ pr_info("Insert = %x\n", us->MS_Status.Insert);
+ pr_info("Ready = %x\n", us->MS_Status.Ready);
+ pr_info("IsMSPro = %x\n", us->MS_Status.IsMSPro);
+ pr_info("IsMSPHG = %x\n", us->MS_Status.IsMSPHG);
+ pr_info("WtP = %x\n", us->MS_Status.WtP);
if (us->MS_Status.IsMSPro) {
MSP_BlockSize = (buf[6] << 8) | buf[7];
MSP_UserAreaBlocks = (buf[10] << 8) | buf[11];
@@ -109,9 +111,9 @@ int ENE_MSInit(struct us_data *us)
} else {
MS_CardInit(us);
}
- printk(KERN_INFO "MS Init Code OK !!\n");
+ pr_info("MS Init Code OK !!\n");
} else {
- printk(KERN_INFO "MS Card Not Ready --- %x\n", buf[0]);
+ pr_info("MS Card Not Ready --- %x\n", buf[0]);
return USB_STOR_TRANSPORT_ERROR;
}
@@ -127,11 +129,11 @@ int ENE_SMInit(struct us_data *us)
int result;
BYTE buf[0x200];
- printk(KERN_INFO "transport --- ENE_SMInit\n");
+ pr_info("transport --- ENE_SMInit\n");
result = ENE_LoadBinCode(us, SM_INIT_PATTERN);
if (result != USB_STOR_XFER_GOOD) {
- printk(KERN_INFO "Load SM Init Code Fail !!\n");
+ pr_info("Load SM Init Code Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
@@ -144,8 +146,7 @@ int ENE_SMInit(struct us_data *us)
result = ENE_SendScsiCmd(us, FDIR_READ, &buf, 0);
if (result != USB_STOR_XFER_GOOD) {
- printk(KERN_ERR
- "Exection SM Init Code Fail !! result = %x\n", result);
+ pr_err("Exection SM Init Code Fail !! result = %x\n", result);
return USB_STOR_TRANSPORT_ERROR;
}
@@ -155,15 +156,15 @@ int ENE_SMInit(struct us_data *us)
us->SM_CardID = buf[2];
if (us->SM_Status.Insert && us->SM_Status.Ready) {
- printk(KERN_INFO "Insert = %x\n", us->SM_Status.Insert);
- printk(KERN_INFO "Ready = %x\n", us->SM_Status.Ready);
- printk(KERN_INFO "WtP = %x\n", us->SM_Status.WtP);
- printk(KERN_INFO "DeviceID = %x\n", us->SM_DeviceID);
- printk(KERN_INFO "CardID = %x\n", us->SM_CardID);
+ pr_info("Insert = %x\n", us->SM_Status.Insert);
+ pr_info("Ready = %x\n", us->SM_Status.Ready);
+ pr_info("WtP = %x\n", us->SM_Status.WtP);
+ pr_info("DeviceID = %x\n", us->SM_DeviceID);
+ pr_info("CardID = %x\n", us->SM_CardID);
MediaChange = 1;
Check_D_MediaFmt(us);
} else {
- printk(KERN_ERR "SM Card Not Ready --- %x\n", buf[0]);
+ pr_err("SM Card Not Ready --- %x\n", buf[0]);
return USB_STOR_TRANSPORT_ERROR;
}
@@ -180,7 +181,7 @@ int ENE_LoadBinCode(struct us_data *us, BYTE flag)
/* void *buf; */
PBYTE buf;
- /* printk(KERN_INFO "transport --- ENE_LoadBinCode\n"); */
+ /* pr_info("transport --- ENE_LoadBinCode\n"); */
if (us->BIN_FLAG == flag)
return USB_STOR_TRANSPORT_GOOD;
@@ -190,24 +191,24 @@ int ENE_LoadBinCode(struct us_data *us, BYTE flag)
switch (flag) {
/* For MS */
case MS_INIT_PATTERN:
- printk(KERN_INFO "MS_INIT_PATTERN\n");
+ pr_info("MS_INIT_PATTERN\n");
memcpy(buf, MS_Init, 0x800);
break;
case MSP_RW_PATTERN:
- printk(KERN_INFO "MSP_RW_PATTERN\n");
+ pr_info("MSP_RW_PATTERN\n");
memcpy(buf, MSP_Rdwr, 0x800);
break;
case MS_RW_PATTERN:
- printk(KERN_INFO "MS_RW_PATTERN\n");
+ pr_info("MS_RW_PATTERN\n");
memcpy(buf, MS_Rdwr, 0x800);
break;
/* For SS */
case SM_INIT_PATTERN:
- printk(KERN_INFO "SM_INIT_PATTERN\n");
+ pr_info("SM_INIT_PATTERN\n");
memcpy(buf, SM_Init, 0x800);
break;
case SM_RW_PATTERN:
- printk(KERN_INFO "SM_RW_PATTERN\n");
+ pr_info("SM_RW_PATTERN\n");
memcpy(buf, SM_Rdwr, 0x800);
break;
}
@@ -238,12 +239,12 @@ int ENE_SendScsiCmd(struct us_data *us, BYTE fDir, void *buf, int use_sg)
cswlen = 0, partial = 0;
unsigned int residue;
- /* printk(KERN_INFO "transport --- ENE_SendScsiCmd\n"); */
+ /* pr_info("transport --- ENE_SendScsiCmd\n"); */
/* send cmd to out endpoint */
result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
bcb, US_BULK_CB_WRAP_LEN, NULL);
if (result != USB_STOR_XFER_GOOD) {
- printk(KERN_ERR "send cmd to out endpoint fail ---\n");
+ pr_err("send cmd to out endpoint fail ---\n");
return USB_STOR_TRANSPORT_ERROR;
}
@@ -262,7 +263,7 @@ int ENE_SendScsiCmd(struct us_data *us, BYTE fDir, void *buf, int use_sg)
result = usb_stor_bulk_transfer_sg(us, pipe, buf,
transfer_length, 0, &partial);
if (result != USB_STOR_XFER_GOOD) {
- printk(KERN_ERR "data transfer fail ---\n");
+ pr_err("data transfer fail ---\n");
return USB_STOR_TRANSPORT_ERROR;
}
}
@@ -272,14 +273,14 @@ int ENE_SendScsiCmd(struct us_data *us, BYTE fDir, void *buf, int use_sg)
US_BULK_CS_WRAP_LEN, &cswlen);
if (result == USB_STOR_XFER_SHORT && cswlen == 0) {
- printk(KERN_WARNING "Received 0-length CSW; retrying...\n");
+ pr_warning("Received 0-length CSW; retrying...\n");
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
bcs, US_BULK_CS_WRAP_LEN, &cswlen);
}
if (result == USB_STOR_XFER_STALLED) {
/* get the status again */
- printk(KERN_WARNING "Attempting to get CSW (2nd try)...\n");
+ pr_warning("Attempting to get CSW (2nd try)...\n");
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
bcs, US_BULK_CS_WRAP_LEN, NULL);
}
@@ -316,7 +317,7 @@ int ENE_Read_Data(struct us_data *us, void *buf, unsigned int length)
struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf;
int result;
- /* printk(KERN_INFO "transport --- ENE_Read_Data\n"); */
+ /* pr_info("transport --- ENE_Read_Data\n"); */
/* set up the command wrapper */
memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
@@ -358,7 +359,7 @@ int ENE_Write_Data(struct us_data *us, void *buf, unsigned int length)
struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf;
int result;
- /* printk("transport --- ENE_Write_Data\n"); */
+ /* pr_info("transport --- ENE_Write_Data\n"); */
/* set up the command wrapper */
memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
@@ -406,37 +407,33 @@ void usb_stor_print_cmd(struct scsi_cmnd *srb)
switch (cmd) {
case TEST_UNIT_READY:
- /* printk(KERN_INFO
- "scsi cmd %X --- SCSIOP_TEST_UNIT_READY\n", cmd); */
+ /* pr_info("scsi cmd %X --- SCSIOP_TEST_UNIT_READY\n", cmd); */
break;
case INQUIRY:
- printk(KERN_INFO "scsi cmd %X --- SCSIOP_INQUIRY\n", cmd);
+ pr_info("scsi cmd %X --- SCSIOP_INQUIRY\n", cmd);
break;
case MODE_SENSE:
- printk(KERN_INFO "scsi cmd %X --- SCSIOP_MODE_SENSE\n", cmd);
+ pr_info("scsi cmd %X --- SCSIOP_MODE_SENSE\n", cmd);
break;
case START_STOP:
- printk(KERN_INFO "scsi cmd %X --- SCSIOP_START_STOP\n", cmd);
+ pr_info("scsi cmd %X --- SCSIOP_START_STOP\n", cmd);
break;
case READ_CAPACITY:
- printk(KERN_INFO "scsi cmd %X --- SCSIOP_READ_CAPACITY\n", cmd);
+ pr_info("scsi cmd %X --- SCSIOP_READ_CAPACITY\n", cmd);
break;
case READ_10:
- /* printk(KERN_INFO
- "scsi cmd %X --- SCSIOP_READ,bn = %X, blen = %X\n"
+ /* pr_info("scsi cmd %X --- SCSIOP_READ,bn = %X, blen = %X\n"
,cmd, bn, blen); */
break;
case WRITE_10:
- /* printk(KERN_INFO
- "scsi cmd %X --- SCSIOP_WRITE,
+ /* pr_ifno("scsi cmd %X --- SCSIOP_WRITE,
bn = %X, blen = %X\n" , cmd, bn, blen); */
break;
case ALLOW_MEDIUM_REMOVAL:
- printk(KERN_INFO
- "scsi cmd %X --- SCSIOP_ALLOW_MEDIUM_REMOVAL\n", cmd);
+ pr_info("scsi cmd %X --- SCSIOP_ALLOW_MEDIUM_REMOVAL\n", cmd);
break;
default:
- printk(KERN_INFO "scsi cmd %X --- Other cmd\n", cmd);
+ pr_info("scsi cmd %X --- Other cmd\n", cmd);
break;
}
bn = 0;
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/