Re: signal to PID 1 from serial console like KeyboardRequest or CAD

[Jeremy Jackson]

On 04/01/2011 01:37 AM, Dmitry Torokhov wrote:
> On Thu, Mar 31, 2011 at 12:57:06PM -0700, Randy Dunlap wrote:
> > On Fri, 25 Mar 2011 13:41:40 -0400 Jeremy Jackson wrote:
> >
> > > Hi,
> > >
> > > Sent to linux-console with no reply for over a week...
> > >
> > > I ran into a problem recently on a Linux server with a remote serial
> > > console.  /sbin/init (actually Upstart) was in a state where nothing
> > > (useful) was running.  I had to power cycle the machine to get back to
> > > the boot prompt.  This has the side-effect of triggering raid rebuilds.
> > >
> > > It would be nice to have what Ctrl-Alt-Del does at the VGA console with
> > > PS/2 or USB keyboard. This sends a SIGINT to PID 1, and most distros
> > > have this set to do "shutdown -r now" which attempts a clean reboot.
> >
> > so C_A_D works at console via PS/2 or USB keyboard, but not on a remote
> > serial console?  Could it be an issue with whatever remote/serial software
> > you are using?
>
> I believe it is simply a matter of console keymap and assigning "boot"
> value to the desired combination.

The VGA console/keyboard isn't an issue here, C_A_D works great.  The 
problem is, that functionality isn't available when using *serial* console.

> > > Once upon a time there was KeyboardRequest, which would send a SIGWINCH
> > > to PID 1 (when pressing Alt-UP_arrow?).  I don't see any sign of this
> > > feature in Linux 2.6.32 though.
> >
> > I couldn't find it in 2.4.37 either.
> >
> > Can 'loadkeys' help you any?
> >
> > > Looking at the Sysrq handlers in the kernel I don't see any keystrokes
> > > that send SIGINT to PID 1 either.
> > >
> > > So, I'm wondering if it makes sense to add a Sysrq key to send a signal
> > > to PID1 ?
> >
> > Dmitry, any ideas?
>
> We have SysRq bindings to unmount filesystems and reboot, isn't that
> enough?

Reboot isn't clean... it doesn't signal MD-raid to "unmount" does it? 
SysRq powerOff does cleanly shutdown md-raid, but who will drive to the 
datacenter to press the power button to turn it back on?

I guess there are two ways to achieve clean (md-raid) reboot when using 
serial console... a new SysRq to reboot "clean", or a new SysRq to 
signal init.  Looking at ctrlaltdel(8), perhaps it could just one SysRq, 
and let userspace (/sbin/init) configure it as needed.


--
Coplanar Networks
http://www.coplanar.net
(519)489-4903
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/