[PATCH] msm: Makefile: Separate machines from arches

[Stephen Boyd]

There isn't any reason to build the board files for machines that
aren't actually defined. But we always want to build in the
devices file since they are common to each ARCH. Split the two so
that boards are only built when the machines they support are
selected.

Signed-off-by: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
---
 arch/arm/mach-msm/Makefile |   29 ++++++++++++++++++++++-------
 1 files changed, 22 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index c72cb8e..31cdcfd 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -21,13 +21,11 @@ obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 
-obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
-obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o
-obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
-obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
-obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
-obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o devices-msm8x60.o
-obj-$(CONFIG_ARCH_MSM8960) += board-msm8960.o devices-msm8960.o
+obj-$(CONFIG_ARCH_MSM7X00A) += devices-msm7x00.o
+obj-$(CONFIG_ARCH_MSM7X30) += devices-msm7x30.o
+obj-$(CONFIG_ARCH_MSM8X60) += devices-msm8x60.o
+obj-$(CONFIG_ARCH_MSM8960) += devices-msm8960.o
+obj-$(CONFIG_ARCH_QSD8X50) += devices-qsd8x50.o
 
 obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-v1.o gpiomux.o
 obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o
@@ -40,3 +38,20 @@ endif
 else
 obj-y	+= gpio.o
 endif
+
+obj-$(CONFIG_MACH_TROUT) += board-trout-gpio.o board-trout-mmc.o board-trout-panel.o
+
+# Board Support
+obj-$(CONFIG_MACH_HALIBUT)		+= board-halibut.o
+obj-$(CONFIG_MACH_MSM7X30_FFA)		+= board-msm7x30.o
+obj-$(CONFIG_MACH_MSM7X30_FLUID)	+= board-msm7x30.o
+obj-$(CONFIG_MACH_MSM7X30_SURF)		+= board-msm7x30.o
+obj-$(CONFIG_MACH_MSM8960_RUMI3)	+= board-msm8960.o
+obj-$(CONFIG_MACH_MSM8960_SIM)		+= board-msm8960.o
+obj-$(CONFIG_MACH_MSM8X60_FFA)		+= board-msm8x60.o
+obj-$(CONFIG_MACH_MSM8X60_RUMI3)	+= board-msm8x60.o
+obj-$(CONFIG_MACH_MSM8X60_SIM)		+= board-msm8x60.o
+obj-$(CONFIG_MACH_MSM8X60_SURF)		+= board-msm8x60.o
+obj-$(CONFIG_MACH_QSD8X50A_ST1_5)	+= board-qsd8x50.o
+obj-$(CONFIG_MACH_QSD8X50_SURF)		+= board-qsd8x50.o
+obj-$(CONFIG_MACH_TROUT)		+= board-trout.o
-- 
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/