RE: [PATCH 6/6] da8xx: enable the use of the ICPFUNC in i2c-davinci
From: Nori, Sekhar
Date: Wed Apr 13 2011 - 11:43:03 EST
On Wed, Apr 13, 2011 at 20:52:05, Ben Gardiner wrote:
> >> --- a/arch/arm/mach-davinci/devices-da8xx.c
> >> +++ b/arch/arm/mach-davinci/devices-da8xx.c
> >> @@ -324,6 +324,12 @@ int __init da8xx_register_i2c(int instance,
> >> else
> >> return -EINVAL;
> >>
> >> + /*
> >> + * Both the DA850 and DA830 have an I2C controller which has the
> >> + * ICPFUNC et. al. registers
> >> + */
> >> + pdata->has_pfunc = 1;
> >
> > The I2C driver implements a default platform data
> > so it should actually be legal for a DA8x board to
> > pass NULL platform data. In that case this line
> > will crash.
>
> Good catch, thanks.
>
> > [...] You should either check for pdata to
> > be NULL or just let each board choose whether it
> > needs recovery (I think the better option).
>
> I understand "check for pdata to be NULL." If you think it is the
> better option I'd be happy to implement it but I don't understand how
> to implement "let each board choose whether it needs recovery."
This is done by just setting has_pfunc = 1 in the
davinci_i2c_platform_data defined in the board file.
Thanks,
Sekhar
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/