Re: [PATCH 1/1] Implement /dev/byte (a generic byte sourcesimiliar to /dev/zero)

[Pavel Machek]

On Mon 2011-04-18 13:37:56, Alexander Holler wrote:
> This device outputs by default 0xff instead 0 which makes more sense
> than 0 to clear e.g. FLASH based devices.

Well, now you should provide example where you mmap /dev/byte, then
write() the flash directly from the mapping.

... hmm, that brings good question: what happens on existing mappings
when the byte is changed?

> To make the device more general usable, the value it outputs is changeable
> on a per file descriptor basis through simple writes to it.
> Values can be decimal (0 - 255), octal (00 - 0377) or hex (0x0 - 0xff).
> For other values (or strings) written to it, the write operation returns an
> error and the subsequent output is undefined.
...
>  # Create a file of size 10GB and filled with 0xaa.
> exec 5<>/dev/byte # Open /dev/byte and assign fd 5 to it
> echo 0xaa >&5     # Instruct the device to output 0xaa

That's seriously strange. /dev/byte should be changeable... by writing
bytes.
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/