[PATCHv4 6/7] tulip/de2104x: don't report different speeds depending on port type

[David Decotigny]

Initial driver reported different speeds depending on the port being
used. This advertises the speed to be 10Mbps in any case, which is
what it actually is on the wire.

Signed-off-by: David Decotigny <decot@xxxxxxxxxx>
---
 drivers/net/tulip/de2104x.c |   10 +++-------
 1 files changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index ab78e1d..46d5a1b 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -1518,18 +1518,17 @@ static int __de_get_settings(struct de_private *de, struct ethtool_cmd *ecmd)
 	switch (de->media_type) {
 	case DE_MEDIA_AUI:
 		ecmd->port = PORT_AUI;
-		ethtool_cmd_speed_set(ecmd, 5);
 		break;
 	case DE_MEDIA_BNC:
 		ecmd->port = PORT_BNC;
-		ethtool_cmd_speed_set(ecmd, 2);
 		break;
 	default:
 		ecmd->port = PORT_TP;
-		ethtool_cmd_speed_set(ecmd, SPEED_10);
 		break;
 	}
 
+	ethtool_cmd_speed_set(ecmd, 10);
+
 	if (dr32(MacMode) & FullDuplex)
 		ecmd->duplex = DUPLEX_FULL;
 	else
@@ -1549,11 +1548,8 @@ static int __de_set_settings(struct de_private *de, struct ethtool_cmd *ecmd)
 {
 	u32 new_media;
 	unsigned int media_lock;
-	u32 speed = ethtool_cmd_speed(ecmd);
 
-	if (speed != SPEED_10 && speed != 5 && speed != 2)
-		return -EINVAL;
-	if (de->de21040 && speed == 2)
+	if (ethtool_cmd_speed(ecmd) != 10)
 		return -EINVAL;
 	if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
 		return -EINVAL;
-- 
1.7.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/