Re: [PATCH] regulator: Move VCOINCELL to be the last element ofmc13892_regulators array

[Axel Lin]

hi Liam,

> Applied, Btw is this fix also for 2.6.39 ?

I check this patch again and found this actually is not a bug
because MC13xxx_DEFINE explictly defines the order of each entry in the array.

#define MC13xxx_DEFINE(prefix, _name, _reg, _vsel_reg, _voltages, _ops) \
        [prefix ## _name] = {                           \
                .desc = {                                               \
                        .name = #prefix "_" #_name,                     \
                        .n_voltages = ARRAY_SIZE(_voltages),            \
                        .ops = &_ops,                   \
                        .type = REGULATOR_VOLTAGE,                      \
                        .id = prefix ## _name,          \
                        .owner = THIS_MODULE,                           \
                },                                                      \
                .reg = prefix ## _reg,                          \
                .enable_bit = prefix ## _reg ## _ ## _name ## EN,       \
                .vsel_reg = prefix ## _vsel_reg,                        \
                .vsel_shift = prefix ## _vsel_reg ## _ ## _name ## VSEL,\
                .vsel_mask = prefix ## _vsel_reg ## _ ## _name ## VSEL_M,\
                .voltages =  _voltages,                                 \
        }

Regards,
Axel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/