[PATCH v2] w1: Add Maxim/Dallas DS2780 Stand-Alone Fuel Gauge ICsupport.

From: Clifton Barnes
Date: Wed May 11 2011 - 13:43:04 EST

Add support for the Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC.

It was suggested to combine this functionality with the current ds2782
driver. Unfortunately, I'm unable to commit the time to refactoring this
driver to that extent and I don't have a platform with the ds2782 part
to validate that there are no regression issues by adding this functionality.

Changes for v2:
- Change simple_strto* functions to kstrto*
- Remove warning due to bin_attribute function prototype changing
- Remove errors/warnings found by checkpatch
- Changed email client to properly send patch with tabs

Signed-off-by: Clifton Barnes <cabarnes@xxxxxxxxxxxxxxxx>
---
drivers/power/Kconfig | 7 +
drivers/power/Makefile | 1 +
drivers/power/ds2780_battery.c | 886 ++++++++++++++++++++++++++++++++++++++++
drivers/w1/slaves/Kconfig | 13 +
drivers/w1/slaves/Makefile | 1 +
drivers/w1/slaves/w1_ds2780.c | 240 +++++++++++
drivers/w1/slaves/w1_ds2780.h | 132 ++++++
drivers/w1/w1_family.h | 1 +
8 files changed, 1281 insertions(+), 0 deletions(-)
create mode 100644 drivers/power/ds2780_battery.c
create mode 100644 drivers/w1/slaves/w1_ds2780.c
create mode 100644 drivers/w1/slaves/w1_ds2780.h

diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 52a462f..dc8c531 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -68,6 +68,13 @@ config BATTERY_DS2760
help
Say Y here to enable support for batteries with ds2760 chip.

+config BATTERY_DS2780
+ tristate "DS2780 battery driver"
+ select W1
+ select W1_SLAVE_DS2780
+ help
+ Say Y here to enable support for batteries with ds2780 chip.
+
config BATTERY_DS2782
tristate "DS2782/DS2786 standalone gas-gauge"
depends on I2C
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 8385bfa..8224990 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_WM8350_POWER) += wm8350_power.o
obj-$(CONFIG_TEST_POWER) += test_power.o

obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
+obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o
obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o
obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
diff --git a/drivers/power/ds2780_battery.c b/drivers/power/ds2780_battery.c
new file mode 100644
index 0000000..a4da870
--- /dev/null
+++ b/drivers/power/ds2780_battery.c
@@ -0,0 +1,886 @@
+/*
+ * 1-wire client/driver for the Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC
+ *
+ * Copyright (C) 2010 Indesign, LLC
+ *
+ * Author: Clifton Barnes <cabarnes@xxxxxxxxxxxxxxxx>
+ *
+ * Based on ds2760_battery and ds2782_battery drivers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/param.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/idr.h>
+
+#include "../w1/w1.h"
+#include "../w1/slaves/w1_ds2780.h"
+
+#define to_ds2780_device_info(x) container_of(x, struct ds2780_device_info, bat)
+#define to_power_supply(x) (struct power_supply *) dev_get_drvdata(x)
+
+/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
+#define DS2780_CURRENT_UNITS 1563
+/* Charge unit measurement in uAh for a 1 milli-ohm sense resistor */
+#define DS2780_CHARGE_UNITS 6250
+/* Number of bytes in user EEPROM space */
+#define DS2780_USER_EEPROM_SIZE (DS2780_EEPROM_BLOCK0_END - \
+ DS2780_EEPROM_BLOCK0_START + 1)
+/* Number of bytes in parameter EEPROM space */
+#define DS2780_PARAM_EEPROM_SIZE (DS2780_EEPROM_BLOCK1_END - \
+ DS2780_EEPROM_BLOCK1_START + 1)
+
+struct ds2780_device_info {
+ struct device *dev;
+ struct power_supply bat;
+ struct device *w1_dev;
+};
+
+enum current_types {
+ CURRENT_NOW,
+ CURRENT_AVG,
+};
+
+static const char model[] = "DS2780";
+static const char manufacturer[] = "Maxim/Dallas";
+
+/* Set sense resistor value in mhos */
+static int ds2780_set_sense_register(struct ds2780_device_info *dev_info,
+ u8 conductance)
+{
+ int ret;
+
+ ret = w1_ds2780_write(dev_info->w1_dev, &conductance,
+ DS2780_RSNSP_REG, sizeof(char));
+ if (ret < 0)
+ return ret;
+
+ ret = w1_ds2780_store_eeprom(dev_info->w1_dev, DS2780_RSNSP_REG);
+ if (ret < 0)
+ return ret;
+
+ ret = w1_ds2780_recall_eeprom(dev_info->w1_dev, DS2780_RSNSP_REG);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+/* Get RSGAIN value from 0 to 1.999 in steps of 0.001 */
+static int ds2780_get_rsgain_register(struct ds2780_device_info *dev_info,
+ u16 *rsgain)
+{
+ int ret;
+ char bytes[2];
+
+ ret = w1_ds2780_read(dev_info->w1_dev, bytes,
+ DS2780_RSGAIN_MSB_REG, sizeof(char));
+ if (ret < 0)
+ return ret;
+
+ ret = w1_ds2780_read(dev_info->w1_dev, bytes + 1,
+ DS2780_RSGAIN_LSB_REG, sizeof(char));
+ if (ret < 0)
+ return ret;
+
+ *rsgain = (bytes[0] << 8) | bytes[1];
+ return 0;
+}
+
+/* Set RSGAIN value from 0 to 1.999 in steps of 0.001 */
+static int ds2780_set_rsgain_register(struct ds2780_device_info *dev_info,
+ u16 rsgain)
+{
+ int ret;
+ char bytes[] = {rsgain >> 8, rsgain & 0xFF};
+
+ ret = w1_ds2780_write(dev_info->w1_dev, bytes,
+ DS2780_RSGAIN_MSB_REG, sizeof(char));
+ if (ret < 0)
+ return ret;
+
+ ret = w1_ds2780_write(dev_info->w1_dev, bytes + 1,
+ DS2780_RSGAIN_LSB_REG, sizeof(char));
+ if (ret < 0)
+ return ret;
+
+ ret = w1_ds2780_store_eeprom(dev_info->w1_dev, DS2780_RSGAIN_MSB_REG);
+ if (ret < 0)
+ return ret;
+
+ ret = w1_ds2780_recall_eeprom(dev_info->w1_dev, DS2780_RSGAIN_MSB_REG);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int ds2780_get_voltage(struct ds2780_device_info *dev_info,
+ int *voltage_uV)
+{
+ char raw[2];
+ s16 voltage_raw;
+ int ret;
+
+ /* The voltage value is located in 10 bits across the voltage MSB
+ and LSB registers in two's compliment form
+ Sign bit of the voltage value is in bit 7 of the voltage MSB register
+ Bits 9 - 3 of the voltage value are in bits 6 - 0 of the
+ voltage MSB register
+ Bits 2 - 0 of the voltage value are in bits 7 - 5 of the
+ voltage LSB register
+ */
+ ret = w1_ds2780_read(dev_info->w1_dev, raw,
+ DS2780_VOLT_MSB_REG, sizeof(char));
+ if (ret < 0)
+ return ret;
+
+ ret = w1_ds2780_read(dev_info->w1_dev, raw + 1,
+ DS2780_VOLT_LSB_REG, sizeof(char));
+ if (ret < 0)
+ return ret;
+
+ voltage_raw = (raw[0] << 3) | (raw[1] >> 5);
+ /* DS2780 reports voltage in units of 4.88mV, but the battery class
+ * reports in units of uV, so convert by multiplying by 4880. */
+ *voltage_uV = voltage_raw * 4880;
+ return 0;
+}
+
+static int ds2780_get_temperature(struct ds2780_device_info *dev_info,
+ int *temperature)
+{
+ char raw[2];
+ s16 temperature_raw;
+ int ret;
+
+ /* The temperature value is located in 10 bits across the temperature
+ MSB and LSB registers in two's compliment form
+ Sign bit of the temperature value is in bit 7 of the temperature
+ MSB register
+ Bits 9 - 3 of the temperature value are in bits 6 - 0 of the
+ temperature MSB register
+ Bits 2 - 0 of the temperature value are in bits 7 - 5 of the
+ temperature LSB register
+ */
+ ret = w1_ds2780_read(dev_info->w1_dev, raw,
+ DS2780_TEMP_MSB_REG, sizeof(char));
+ if (ret < 0)
+ return ret;
+
+ ret = w1_ds2780_read(dev_info->w1_dev, raw + 1,
+ DS2780_TEMP_LSB_REG, sizeof(char));
+ if (ret < 0)
+ return ret;
+
+ temperature_raw = (((signed char)raw[0] << 3)) | (raw[1] >> 5);
+ /* DS2780 reports temperature in signed units of 0.125 C, but the
+ * battery class reports in units of 1/10 C, so we convert by
+ * multiplying by .125 * 10 = 1.25. */
+ *temperature = temperature_raw + (temperature_raw / 4);
+ return 0;
+}
+
+static int ds2780_get_current(struct ds2780_device_info *dev_info,
+ enum current_types type, int *current_uA)
+{
+ int ret;
+ char raw[2];
+ s16 current_raw;
+ int sense_res;
+ u8 sense_res_raw;
+ u8 reg_msb;
+ u8 reg_lsb;
+
+ /*
+ * The units of measurement for current are dependent on the value of
+ * the sense resistor.
+ */
+ ret = w1_ds2780_read(dev_info->w1_dev, &sense_res_raw,
+ DS2780_RSNSP_REG, sizeof(u8));
+ if (ret < 0)
+ return ret;
+
+ if (sense_res_raw == 0) {
+ dev_err(dev_info->dev, "sense resistor value is 0\n");
+ return -ENXIO;
+ }
+ sense_res = 1000 / sense_res_raw;
+
+ if (type == CURRENT_NOW) {
+ reg_msb = DS2780_CURRENT_MSB_REG;
+ reg_lsb = DS2780_CURRENT_LSB_REG;
+ } else if (type == CURRENT_AVG) {
+ reg_msb = DS2780_IAVG_MSB_REG;
+ reg_lsb = DS2780_IAVG_LSB_REG;
+ } else {
+ return -EINVAL;
+ }
+
+ /* The current value is located in 16 bits across the current MSB
+ and LSB registers in two's compliment form
+ Sign bit of the current value is in bit 7 of the current MSB register
+ Bits 14 - 8 of the current value are in bits 6 - 0 of the current
+ MSB register
+ Bits 7 - 0 of the current value are in bits 7 - 0 of the current
+ LSB register
+ */
+ ret = w1_ds2780_read(dev_info->w1_dev, raw, reg_msb, sizeof(char));
+ if (ret < 0)
+ return ret;
+
+ ret = w1_ds2780_read(dev_info->w1_dev, raw + 1, reg_lsb, sizeof(char));
+ if (ret < 0)
+ return ret;
+
+ current_raw = ((signed char)raw[0] << 8) | raw[1];
+ *current_uA = current_raw * (DS2780_CURRENT_UNITS / sense_res);
+ return 0;
+}
+
+static int ds2780_get_accumulated_current(struct ds2780_device_info *dev_info,
+ int *accumulated_current)
+{
+ char raw[2];
+ s16 current_raw;
+ int sense_res;
+ u8 sense_res_raw;
+ int ret;
+
+ /*
+ The units of measurement for accumulated current are dependent on
+ the value of the sense resistor.
+ */
+ ret = w1_ds2780_read(dev_info->w1_dev, &sense_res_raw,
+ DS2780_RSNSP_REG, sizeof(u8));
+ if (ret < 0)
+ return ret;
+
+ if (sense_res_raw == 0) {
+ dev_err(dev_info->dev, "sense resistor value is 0\n");
+ return -ENXIO;
+ }
+ sense_res = 1000 / sense_res_raw;
+
+ /* The ACR value is located in 16 bits across the ACR MSB and
+ LSB registers
+ Bits 15 - 8 of the ACR value are in bits 7 - 0 of the ACR
+ MSB register
+ Bits 7 - 0 of the ACR value are in bits 7 - 0 of the ACR
+ LSB register
+ */
+ ret = w1_ds2780_read(dev_info->w1_dev, raw,
+ DS2780_ACR_MSB_REG, sizeof(char));
+ if (ret < 0)
+ return ret;
+
+ ret = w1_ds2780_read(dev_info->w1_dev, raw + 1,
+ DS2780_ACR_LSB_REG, sizeof(char));
+ if (ret < 0)
+ return ret;
+
+ current_raw = (raw[0] << 8) | raw[1];
+ *accumulated_current = current_raw * (DS2780_CHARGE_UNITS / sense_res);
+ return 0;
+}
+
+static int ds2780_get_capacity(struct ds2780_device_info *dev_info,
+ int *capacity)
+{
+ int ret;
+ u8 raw;
+
+ ret = w1_ds2780_read(dev_info->w1_dev, &raw,
+ DS2780_RARC_REG, sizeof(u8));
+ if (ret < 0)
+ return ret;
+
+ *capacity = raw;
+ return raw;
+}
+
+static int ds2780_get_status(struct ds2780_device_info *dev_info, int *status)
+{
+ int ret;
+ int current_uA;
+ int capacity;
+
+ ret = ds2780_get_current(dev_info, CURRENT_NOW, &current_uA);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2780_get_capacity(dev_info, &capacity);
+ if (ret < 0)
+ return ret;
+
+ if (capacity == 100)
+ *status = POWER_SUPPLY_STATUS_FULL;
+ else if (current_uA == 0)
+ *status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ else if (current_uA < 0)
+ *status = POWER_SUPPLY_STATUS_DISCHARGING;
+ else
+ *status = POWER_SUPPLY_STATUS_CHARGING;
+
+ return 0;
+}
+
+static int ds2780_get_charge_now(struct ds2780_device_info *dev_info,
+ int *charge_now)
+{
+ char raw[2];
+ u16 charge_raw;
+ int ret;
+
+ /* The RAAC value is located in 16 bits across the RAAC MSB and
+ LSB registers
+ Bits 15 - 8 of the RAAC value are in bits 7 - 0 of the RAAC
+ MSB register
+ Bits 7 - 0 of the RAAC value are in bits 7 - 0 of the RAAC
+ LSB register
+ */
+ ret = w1_ds2780_read(dev_info->w1_dev, raw,
+ DS2780_RAAC_MSB_REG, sizeof(char));
+ if (ret < 0)
+ return ret;
+
+ ret = w1_ds2780_read(dev_info->w1_dev, raw + 1,
+ DS2780_RAAC_LSB_REG, sizeof(char));
+ if (ret < 0)
+ return ret;
+
+ charge_raw = (raw[0] << 8) | raw[1];
+ *charge_now = charge_raw * 1600;
+
+ return 0;
+
+}
+
+static int ds2780_get_control_register(struct ds2780_device_info *dev_info,
+ u8 *control_reg)
+{
+ u8 reg;
+ int ret;
+
+ ret = w1_ds2780_read(dev_info->w1_dev, &reg,
+ DS2780_CONTROL_REG, sizeof(u8));
+ if (ret < 0)
+ return ret;
+
+ *control_reg = reg;
+ return 0;
+}
+
+static int ds2780_set_control_register(struct ds2780_device_info *dev_info,
+ u8 control_reg)
+{
+ int ret;
+
+ ret = w1_ds2780_write(dev_info->w1_dev, &control_reg,
+ DS2780_CONTROL_REG, sizeof(u8));
+ if (ret < 0)
+ return ret;
+
+ ret = w1_ds2780_store_eeprom(dev_info->w1_dev, DS2780_CONTROL_REG);
+ if (ret < 0)
+ return ret;
+
+ ret = w1_ds2780_recall_eeprom(dev_info->w1_dev, DS2780_CONTROL_REG);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int ds2780_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret = 0;
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = ds2780_get_voltage(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_TEMP:
+ ret = ds2780_get_temperature(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = model;
+ break;
+
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = manufacturer;
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = ds2780_get_current(dev_info, CURRENT_NOW, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ ret = ds2780_get_current(dev_info, CURRENT_AVG, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = ds2780_get_status(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = ds2780_get_capacity(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+ ret = ds2780_get_accumulated_current(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ ret = ds2780_get_charge_now(dev_info, &val->intval);
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property ds2780_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+};
+
+static ssize_t ds2780_get_pmod_enabled(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 control_reg;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ /* Get power mode */
+ ret = ds2780_get_control_register(dev_info, &control_reg);
+ if (ret < 0)
+ return ret;
+
+ if (control_reg & DS2780_CONTROL_REG_PMOD)
+ ret = sprintf(buf, "1\n");
+ else
+ ret = sprintf(buf, "0\n");
+
+ return ret;
+}
+
+static ssize_t ds2780_set_pmod_enabled(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u8 control_reg;
+ u8 new_setting;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ /* Set power mode */
+ ret = ds2780_get_control_register(dev_info, &control_reg);
+ if (ret < 0)
+ return ret;
+
+ ret = kstrtou8(buf, 10, &new_setting);
+ if (ret < 0)
+ return ret;
+
+ if ((new_setting != 0) && (new_setting != 1)) {
+ dev_err(dev_info->dev, "Invalid pmod setting (0 or 1)\n");
+ return -EINVAL;
+ }
+
+ if (new_setting)
+ control_reg |= DS2780_CONTROL_REG_PMOD;
+ else
+ control_reg &= ~DS2780_CONTROL_REG_PMOD;
+
+ ret = ds2780_set_control_register(dev_info, control_reg);
+ if (ret < 0)
+ return ret;
+
+ return count;
+
+}
+
+static ssize_t ds2780_get_sense_resistor_value(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 sense_resistor;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ ret = w1_ds2780_read(dev_info->w1_dev, &sense_resistor,
+ DS2780_RSNSP_REG, sizeof(u8));
+ if (ret < 0)
+ return ret;
+
+ ret = sprintf(buf, "%i\n", sense_resistor);
+ return ret;
+}
+
+static ssize_t ds2780_set_sense_resistor_value(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u8 new_setting;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ ret = kstrtou8(buf, 10, &new_setting);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2780_set_sense_register(dev_info, new_setting);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t ds2780_get_rsgain_setting(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u16 rsgain;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ ret = ds2780_get_rsgain_register(dev_info, &rsgain);
+ if (ret < 0)
+ return ret;
+
+ ret = sprintf(buf, "%d\n", rsgain);
+ return ret;
+}
+
+static ssize_t ds2780_set_rsgain_setting(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u16 new_setting;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ ret = kstrtou16(buf, 10, &new_setting);
+ if (ret < 0)
+ return ret;
+
+ /* Gain can only be from 0 to 1.999 in steps of .001 */
+ if (new_setting > 1999) {
+ dev_err(dev_info->dev, "Invalid rsgain setting (0 - 1999)\n");
+ return -EINVAL;
+ }
+
+ ret = ds2780_set_rsgain_register(dev_info, new_setting);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t ds2780_get_user_eeprom(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ ret = w1_ds2780_read(dev_info->w1_dev, buf, DS2780_EEPROM_BLOCK0_START,
+ DS2780_USER_EEPROM_SIZE);
+ if (ret < 0)
+ return ret;
+
+ return DS2780_USER_EEPROM_SIZE;
+}
+
+static ssize_t ds2780_set_user_eeprom(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ /* Only write as much as there is user EEPROM to not overwrite
+ parameter EEPROM
+ */
+ if (count > DS2780_USER_EEPROM_SIZE)
+ count = DS2780_USER_EEPROM_SIZE;
+
+ ret = w1_ds2780_write(dev_info->w1_dev, (char *)buf,
+ DS2780_EEPROM_BLOCK0_START, count);
+ if (ret < 0)
+ return ret;
+
+ ret = w1_ds2780_store_eeprom(dev_info->w1_dev,
+ DS2780_EEPROM_BLOCK0_START);
+ if (ret < 0)
+ return ret;
+
+ ret = w1_ds2780_recall_eeprom(dev_info->w1_dev,
+ DS2780_EEPROM_BLOCK0_START);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t ds2780_get_param_eeprom(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ ret = w1_ds2780_read(dev_info->w1_dev, buf, DS2780_EEPROM_BLOCK1_START,
+ DS2780_PARAM_EEPROM_SIZE);
+ if (ret < 0)
+ return ret;
+
+ return DS2780_PARAM_EEPROM_SIZE;
+}
+
+static ssize_t ds2780_set_param_eeprom(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ /* Only write as much as there is parameter EEPROM */
+ if (count > DS2780_PARAM_EEPROM_SIZE)
+ count = DS2780_PARAM_EEPROM_SIZE;
+
+ ret = w1_ds2780_write(dev_info->w1_dev, (char *)buf,
+ DS2780_EEPROM_BLOCK1_START, count);
+ if (ret < 0)
+ return ret;
+
+ ret = w1_ds2780_store_eeprom(dev_info->w1_dev,
+ DS2780_EEPROM_BLOCK1_START);
+ if (ret < 0)
+ return ret;
+
+ ret = w1_ds2780_recall_eeprom(dev_info->w1_dev,
+ DS2780_EEPROM_BLOCK1_START);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t ds2780_get_pio_pin(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 sfr;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ ret = w1_ds2780_read(dev_info->w1_dev, &sfr,
+ DS2780_SFR_REG, sizeof(u8));
+ if (ret < 0)
+ return ret;
+
+ ret = sprintf(buf, "%d\n", sfr & DS2780_SFR_REG_PIOSC);
+ return ret;
+}
+
+static ssize_t ds2780_set_pio_pin(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u8 new_setting;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ ret = kstrtou8(buf, 10, &new_setting);
+ if (ret < 0)
+ return ret;
+
+ if ((new_setting != 0) && (new_setting != 1)) {
+ dev_err(dev_info->dev, "Invalid pio_pin setting (0 or 1)\n");
+ return -EINVAL;
+ }
+
+ ret = w1_ds2780_write(dev_info->w1_dev, &new_setting,
+ DS2780_SFR_REG, sizeof(u8));
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+
+static DEVICE_ATTR(pmod_enabled, 0644, ds2780_get_pmod_enabled,
+ ds2780_set_pmod_enabled);
+static DEVICE_ATTR(sense_resistor_value, 0644, ds2780_get_sense_resistor_value,
+ ds2780_set_sense_resistor_value);
+static DEVICE_ATTR(rsgain_setting, 0644, ds2780_get_rsgain_setting,
+ ds2780_set_rsgain_setting);
+static DEVICE_ATTR(user_eeprom, 0644, ds2780_get_user_eeprom,
+ ds2780_set_user_eeprom);
+static DEVICE_ATTR(param_eeprom, 0644, ds2780_get_param_eeprom,
+ ds2780_set_param_eeprom);
+static DEVICE_ATTR(pio_pin, 0644, ds2780_get_pio_pin, ds2780_set_pio_pin);
+
+
+static struct attribute *ds2780_attributes[] = {
+ &dev_attr_pmod_enabled.attr,
+ &dev_attr_sense_resistor_value.attr,
+ &dev_attr_rsgain_setting.attr,
+ &dev_attr_user_eeprom.attr,
+ &dev_attr_param_eeprom.attr,
+ &dev_attr_pio_pin.attr,
+ NULL
+};
+
+static const struct attribute_group ds2780_attr_group = {
+ .attrs = ds2780_attributes,
+};
+
+static int ds2780_battery_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct ds2780_device_info *dev_info;
+
+ dev_info = kzalloc(sizeof(*dev_info), GFP_KERNEL);
+ if (!dev_info) {
+ ret = -ENOMEM;
+ goto dev_info_alloc_failed;
+ }
+
+ platform_set_drvdata(pdev, dev_info);
+
+ dev_info->dev = &pdev->dev;
+ dev_info->w1_dev = pdev->dev.parent;
+ dev_info->bat.name = dev_name(&pdev->dev);
+ dev_info->bat.type = POWER_SUPPLY_TYPE_BATTERY;
+ dev_info->bat.properties = ds2780_battery_props;
+ dev_info->bat.num_properties = ARRAY_SIZE(ds2780_battery_props);
+ dev_info->bat.get_property = ds2780_battery_get_property;
+
+ ret = power_supply_register(&pdev->dev, &dev_info->bat);
+ if (ret) {
+ dev_err(dev_info->dev, "failed to register battery\n");
+ goto batt_failed;
+ }
+
+ ret = sysfs_create_group(&dev_info->bat.dev->kobj, &ds2780_attr_group);
+ if (ret) {
+ printk(KERN_INFO "ds2780: failed to create sysfs group\n");
+ goto fail_sysfs;
+ }
+
+ return 0;
+
+fail_sysfs:
+ power_supply_unregister(&dev_info->bat);
+batt_failed:
+ kfree(dev_info);
+dev_info_alloc_failed:
+ return ret;
+}
+
+static int ds2780_battery_remove(struct platform_device *pdev)
+{
+ struct ds2780_device_info *dev_info = platform_get_drvdata(pdev);
+
+ /* remove attributes */
+ sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2780_attr_group);
+
+ power_supply_unregister(&dev_info->bat);
+
+ kfree(dev_info);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int ds2780_battery_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ return 0;
+}
+
+static int ds2780_battery_resume(struct platform_device *pdev)
+{
+ return 0;
+}
+
+#else
+
+#define ds2780_battery_suspend NULL
+#define ds2780_battery_resume NULL
+
+#endif /* CONFIG_PM */
+
+MODULE_ALIAS("platform:ds2780-battery");
+
+static struct platform_driver ds2780_battery_driver = {
+ .driver = {
+ .name = "ds2780-battery",
+ },
+ .probe = ds2780_battery_probe,
+ .remove = ds2780_battery_remove,
+ .suspend = ds2780_battery_suspend,
+ .resume = ds2780_battery_resume,
+};
+
+static int __init ds2780_battery_init(void)
+{
+ return platform_driver_register(&ds2780_battery_driver);
+}
+
+static void __exit ds2780_battery_exit(void)
+{
+ platform_driver_unregister(&ds2780_battery_driver);
+}
+
+module_init(ds2780_battery_init);
+module_exit(ds2780_battery_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Clifton Barnes <cabarnes@xxxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Maxim/Dallas DS2780 Stand-Alone Fuel Gauage IC driver");
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
index f0c9096..d9fa263 100644
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@@ -61,6 +61,19 @@ config W1_SLAVE_DS2760

If you are unsure, say N.

+config W1_SLAVE_DS2780
+ tristate "Dallas 2780 battery monitor chip"
+ depends on W1
+ help
+ If you enable this you will have the DS2780 battery monitor
+ chip support.
+
+ The battery monitor chip is used in many batteries/devices
+ as the one who is responsible for charging/discharging/monitoring
+ Li+ batteries.
+
+ If you are unsure, say N.
+
config W1_SLAVE_BQ27000
tristate "BQ27000 slave support"
depends on W1
diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile
index 3c76350..00c9134 100644
--- a/drivers/w1/slaves/Makefile
+++ b/drivers/w1/slaves/Makefile
@@ -8,4 +8,5 @@ obj-$(CONFIG_W1_SLAVE_DS2423) += w1_ds2423.o
obj-$(CONFIG_W1_SLAVE_DS2431) += w1_ds2431.o
obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o
obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o
+obj-$(CONFIG_W1_SLAVE_DS2780) += w1_ds2780.o
obj-$(CONFIG_W1_SLAVE_BQ27000) += w1_bq27000.o
diff --git a/drivers/w1/slaves/w1_ds2780.c b/drivers/w1/slaves/w1_ds2780.c
new file mode 100644
index 0000000..5b096a8
--- /dev/null
+++ b/drivers/w1/slaves/w1_ds2780.c
@@ -0,0 +1,240 @@
+/*
+ * 1-Wire implementation for the ds2780 chip
+ *
+ * Copyright (C) 2010 Indesign, LLC
+ *
+ * Author: Clifton Barnes <cabarnes@xxxxxxxxxxxxxxxx>
+ *
+ * Based on w1-ds2760 driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/idr.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+#include "../w1_family.h"
+#include "w1_ds2780.h"
+
+static int w1_ds2780_io(struct device *dev, char *buf, int addr, size_t count,
+ int io)
+{
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+
+ if (!dev)
+ return -ENODEV;
+
+ mutex_lock(&sl->master->mutex);
+
+ if (addr > DS2780_DATA_SIZE || addr < 0) {
+ count = 0;
+ goto out;
+ }
+ if (addr + count > DS2780_DATA_SIZE)
+ count = DS2780_DATA_SIZE - addr;
+
+ if (!w1_reset_select_slave(sl)) {
+ if (!io) {
+ w1_write_8(sl->master, W1_DS2780_READ_DATA);
+ w1_write_8(sl->master, addr);
+ count = w1_read_block(sl->master, buf, count);
+ } else {
+ w1_write_8(sl->master, W1_DS2780_WRITE_DATA);
+ w1_write_8(sl->master, addr);
+ w1_write_block(sl->master, buf, count);
+ /* XXX w1_write_block returns void, not n_written */
+ }
+ }
+
+out:
+ mutex_unlock(&sl->master->mutex);
+
+ return count;
+}
+
+int w1_ds2780_read(struct device *dev, char *buf, int addr, size_t count)
+{
+ return w1_ds2780_io(dev, buf, addr, count, 0);
+}
+EXPORT_SYMBOL(w1_ds2780_read);
+
+int w1_ds2780_write(struct device *dev, char *buf, int addr, size_t count)
+{
+ return w1_ds2780_io(dev, buf, addr, count, 1);
+}
+EXPORT_SYMBOL(w1_ds2780_write);
+
+static int w1_ds2780_eeprom_cmd(struct device *dev, int addr, int cmd)
+{
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+
+ if (!dev)
+ return -EINVAL;
+
+ mutex_lock(&sl->master->mutex);
+
+ if (w1_reset_select_slave(sl) == 0) {
+ w1_write_8(sl->master, cmd);
+ w1_write_8(sl->master, addr);
+ }
+
+ mutex_unlock(&sl->master->mutex);
+ return 0;
+}
+
+int w1_ds2780_store_eeprom(struct device *dev, int addr)
+{
+ return w1_ds2780_eeprom_cmd(dev, addr, W1_DS2780_COPY_DATA);
+}
+EXPORT_SYMBOL(w1_ds2780_store_eeprom);
+
+int w1_ds2780_recall_eeprom(struct device *dev, int addr)
+{
+ return w1_ds2780_eeprom_cmd(dev, addr, W1_DS2780_RECALL_DATA);
+}
+EXPORT_SYMBOL(w1_ds2780_recall_eeprom);
+
+static ssize_t w1_ds2780_read_bin(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ return w1_ds2780_read(dev, buf, off, count);
+}
+
+static struct bin_attribute w1_ds2780_bin_attr = {
+ .attr = {
+ .name = "w1_slave",
+ .mode = S_IRUGO,
+ },
+ .size = DS2780_DATA_SIZE,
+ .read = w1_ds2780_read_bin,
+};
+
+static DEFINE_IDR(bat_idr);
+static DEFINE_MUTEX(bat_idr_lock);
+
+static int new_bat_id(void)
+{
+ int ret;
+
+ while (1) {
+ int id;
+
+ ret = idr_pre_get(&bat_idr, GFP_KERNEL);
+ if (ret == 0)
+ return -ENOMEM;
+
+ mutex_lock(&bat_idr_lock);
+ ret = idr_get_new(&bat_idr, NULL, &id);
+ mutex_unlock(&bat_idr_lock);
+
+ if (ret == 0) {
+ ret = id & MAX_ID_MASK;
+ break;
+ } else if (ret == -EAGAIN) {
+ continue;
+ } else {
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static void release_bat_id(int id)
+{
+ mutex_lock(&bat_idr_lock);
+ idr_remove(&bat_idr, id);
+ mutex_unlock(&bat_idr_lock);
+}
+
+static int w1_ds2780_add_slave(struct w1_slave *sl)
+{
+ int ret;
+ int id;
+ struct platform_device *pdev;
+
+ id = new_bat_id();
+ if (id < 0) {
+ ret = id;
+ goto noid;
+ }
+
+ pdev = platform_device_alloc("ds2780-battery", id);
+ if (!pdev) {
+ ret = -ENOMEM;
+ goto pdev_alloc_failed;
+ }
+ pdev->dev.parent = &sl->dev;
+
+ ret = platform_device_add(pdev);
+ if (ret)
+ goto pdev_add_failed;
+
+ ret = sysfs_create_bin_file(&sl->dev.kobj, &w1_ds2780_bin_attr);
+ if (ret)
+ goto bin_attr_failed;
+
+ dev_set_drvdata(&sl->dev, pdev);
+
+ goto success;
+
+bin_attr_failed:
+pdev_add_failed:
+ platform_device_unregister(pdev);
+pdev_alloc_failed:
+ release_bat_id(id);
+noid:
+success:
+ return ret;
+}
+
+static void w1_ds2780_remove_slave(struct w1_slave *sl)
+{
+ struct platform_device *pdev = dev_get_drvdata(&sl->dev);
+ int id = pdev->id;
+
+ platform_device_unregister(pdev);
+ release_bat_id(id);
+ sysfs_remove_bin_file(&sl->dev.kobj, &w1_ds2780_bin_attr);
+}
+
+static struct w1_family_ops w1_ds2780_fops = {
+ .add_slave = w1_ds2780_add_slave,
+ .remove_slave = w1_ds2780_remove_slave,
+};
+
+static struct w1_family w1_ds2780_family = {
+ .fid = W1_FAMILY_DS2780,
+ .fops = &w1_ds2780_fops,
+};
+
+static int __init w1_ds2780_init(void)
+{
+ idr_init(&bat_idr);
+ return w1_register_family(&w1_ds2780_family);
+}
+
+static void __exit w1_ds2780_exit(void)
+{
+ w1_unregister_family(&w1_ds2780_family);
+ idr_destroy(&bat_idr);
+}
+
+module_init(w1_ds2780_init);
+module_exit(w1_ds2780_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Clifton Barnes <cabarnes@xxxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("1-wire Driver for Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC");
diff --git a/drivers/w1/slaves/w1_ds2780.h b/drivers/w1/slaves/w1_ds2780.h
new file mode 100644
index 0000000..671cb6a
--- /dev/null
+++ b/drivers/w1/slaves/w1_ds2780.h
@@ -0,0 +1,132 @@
+/*
+ * 1-Wire implementation for the ds2780 chip
+ *
+ * Copyright (C) 2010 Indesign, LLC
+ *
+ * Author: Clifton Barnes <cabarnes@xxxxxxxxxxxxxxxx>
+ *
+ * Based on w1-ds2760 driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __w1_ds2780_h__
+#define __w1_ds2780_h__
+
+/* Function commands */
+#define W1_DS2780_READ_DATA 0x69
+#define W1_DS2780_WRITE_DATA 0x6C
+#define W1_DS2780_COPY_DATA 0x48
+#define W1_DS2780_RECALL_DATA 0xB8
+#define W1_DS2780_LOCK 0x6A
+
+/* Register map */
+/* Register 0x00 Reserved */
+#define DS2780_STATUS_REG 0x01
+#define DS2780_RAAC_MSB_REG 0x02
+#define DS2780_RAAC_LSB_REG 0x03
+#define DS2780_RSAC_MSB_REG 0x04
+#define DS2780_RSAC_LSB_REG 0x05
+#define DS2780_RARC_REG 0x06
+#define DS2780_RSRC_REG 0x07
+#define DS2780_IAVG_MSB_REG 0x08
+#define DS2780_IAVG_LSB_REG 0x09
+#define DS2780_TEMP_MSB_REG 0x0A
+#define DS2780_TEMP_LSB_REG 0x0B
+#define DS2780_VOLT_MSB_REG 0x0C
+#define DS2780_VOLT_LSB_REG 0x0D
+#define DS2780_CURRENT_MSB_REG 0x0E
+#define DS2780_CURRENT_LSB_REG 0x0F
+#define DS2780_ACR_MSB_REG 0x10
+#define DS2780_ACR_LSB_REG 0x11
+#define DS2780_ACRL_MSB_REG 0x12
+#define DS2780_ACRL_LSB_REG 0x13
+#define DS2780_AS_REG 0x14
+#define DS2780_SFR_REG 0x15
+#define DS2780_FULL_MSB_REG 0x16
+#define DS2780_FULL_LSB_REG 0x17
+#define DS2780_AE_MSB_REG 0x18
+#define DS2780_AE_LSB_REG 0x19
+#define DS2780_SE_MSB_REG 0x1A
+#define DS2780_SE_LSB_REG 0x1B
+/* Register 0x1C - 0x1E Reserved */
+#define DS2780_EEPROM_REG 0x1F
+#define DS2780_EEPROM_BLOCK0_START 0x20
+/* Register 0x20 - 0x2F User EEPROM */
+#define DS2780_EEPROM_BLOCK0_END 0x2F
+/* Register 0x30 - 0x5F Reserved */
+#define DS2780_EEPROM_BLOCK1_START 0x60
+#define DS2780_CONTROL_REG 0x60
+#define DS2780_AB_REG 0x61
+#define DS2780_AC_MSB_REG 0x62
+#define DS2780_AC_LSB_REG 0x63
+#define DS2780_VCHG_REG 0x64
+#define DS2780_IMIN_REG 0x65
+#define DS2780_VAE_REG 0x66
+#define DS2780_IAE_REG 0x67
+#define DS2780_AE_40_REG 0x68
+#define DS2780_RSNSP_REG 0x69
+#define DS2780_FULL_40_MSB_REG 0x6A
+#define DS2780_FULL_40_LSB_REG 0x6B
+#define DS2780_FULL_3040_SLOPE_REG 0x6C
+#define DS2780_FULL_2030_SLOPE_REG 0x6D
+#define DS2780_FULL_1020_SLOPE_REG 0x6E
+#define DS2780_FULL_0010_SLOPE_REG 0x6F
+#define DS2780_AE_3040_SLOPE_REG 0x70
+#define DS2780_AE_2030_SLOPE_REG 0x71
+#define DS2780_AE_1020_SLOPE_REG 0x72
+#define DS2780_AE_0010_SLOPE_REG 0x73
+#define DS2780_SE_3040_SLOPE_REG 0x74
+#define DS2780_SE_2030_SLOPE_REG 0x75
+#define DS2780_SE_1020_SLOPE_REG 0x76
+#define DS2780_SE_0010_SLOPE_REG 0x77
+#define DS2780_RSGAIN_MSB_REG 0x78
+#define DS2780_RSGAIN_LSB_REG 0x79
+#define DS2780_RSTC_REG 0x7A
+#define DS2780_FRSGAIN_MSB_REG 0x7B
+#define DS2780_FRSGAIN_LSB_REG 0x7C
+#define DS2780_EEPROM_BLOCK1_END 0x7C
+/* Register 0x7D - 0xFF Reserved */
+
+/* Number of valid register addresses */
+#define DS2780_DATA_SIZE 0x80
+
+/* Status register bits */
+#define DS2780_STATUS_REG_CHGTF (1 << 7)
+#define DS2780_STATUS_REG_AEF (1 << 6)
+#define DS2780_STATUS_REG_SEF (1 << 5)
+#define DS2780_STATUS_REG_LEARNF (1 << 4)
+/* Bit 3 Reserved */
+#define DS2780_STATUS_REG_UVF (1 << 2)
+#define DS2780_STATUS_REG_PORF (1 << 1)
+/* Bit 0 Reserved */
+
+/* Control register bits */
+/* Bit 7 Reserved */
+#define DS2780_CONTROL_REG_UVEN (1 << 6)
+#define DS2780_CONTROL_REG_PMOD (1 << 5)
+#define DS2780_CONTROL_REG_RNAOP (1 << 4)
+/* Bit 0 - 3 Reserved */
+
+/* Special feature register bits */
+/* Bit 1 - 7 Reserved */
+#define DS2780_SFR_REG_PIOSC (1 << 0)
+
+/* EEPROM register bits */
+#define DS2780_EEPROM_REG_EEC (1 << 7)
+#define DS2780_EEPROM_REG_LOCK (1 << 6)
+/* Bit 2 - 6 Reserved */
+#define DS2780_EEPROM_REG_BL1 (1 << 1)
+#define DS2780_EEPROM_REG_BL0 (1 << 0)
+
+extern int w1_ds2780_read(struct device *dev, char *buf, int addr,
+ size_t count);
+extern int w1_ds2780_write(struct device *dev, char *buf, int addr,
+ size_t count);
+extern int w1_ds2780_store_eeprom(struct device *dev, int addr);
+extern int w1_ds2780_recall_eeprom(struct device *dev, int addr);
+
+#endif /* !__w1_ds2780_h__ */
diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h
index f3b636d..e76125c 100644
--- a/drivers/w1/w1_family.h
+++ b/drivers/w1/w1_family.h
@@ -36,6 +36,7 @@
#define W1_THERM_DS18B20 0x28
#define W1_EEPROM_DS2431 0x2D
#define W1_FAMILY_DS2760 0x30
+#define W1_FAMILY_DS2780 0x32

#define MAXNAMELEN 32

--
1.7.3.4


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/