Re: [PATCH] pci, e1000e: Add and use __pci_disable_link_state

[Jesse Barnes]

On Wed, 11 May 2011 13:23:21 -0700
Yinghai Lu <yinghai@xxxxxxxxxx> wrote:

> On 05/09/2011 02:35 PM, Jesse Barnes wrote:
> > On Sun, 08 May 2011 11:54:32 -0700
> > Yinghai Lu <yinghai@xxxxxxxxxx> wrote:
> > 
> >>
> >> Need to use it in _e1000e_disable_aspm.
> >> when aer happens,
> >> pci_walk_bus already have down_read(&pci_bus_sem)...
> >> then report_slot_reset
> >>         ==> e1000_io_slot_reset
> >>                 ==> e1000e_disable_aspm
> >>                         ==> pci_disable_link_state...
> >>
> >> We can not use pci_disable_link_state, and it will try to hold pci_bus_sem again.
> >>
> >> Try to have __pci_disable_link_state that will not need to hold pci_bus_sem.
> > 
> > What about the other callers of e1000e_disable_aspm?  Do they already
> > have the lock held or is it just reset that needs the already locked
> > version?
> 
> yes. 
> 
> there is another version when aspm is not defined. and it does not use any lock. 
> 
> #ifdef CONFIG_PCIEASPM
> static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
> {
>         pci_disable_link_state(pdev, state);
> }
> #else
> static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
> {
>         int pos;
>         u16 reg16;
> 
>         /*
>          * Both device and parent should have the same ASPM setting.
>          * Disable ASPM in downstream component first and then upstream.
>          */
>         pos = pci_pcie_cap(pdev);
>         pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &reg16);
>         reg16 &= ~state;
>         pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
> 
>         if (!pdev->bus->self)
>                 return;
> 
>         pos = pci_pcie_cap(pdev->bus->self);
>         pci_read_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, &reg16);
>         reg16 &= ~state;
>         pci_write_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, reg16);
> }
> #endif

No, I mean __e1000e_disable_aspm is called from several spots:

*** drivers/net/e1000e/82571.c:
e1000_get_variants_82571[435]  e1000e_disable_aspm(adapter->pdev, PCIE_LINK_STATE_L0S);

*** drivers/net/e1000e/netdev.c:
e1000_change_mtu[5027]         e1000e_disable_aspm(adapter->pdev, PCIE_LINK_STATE_L1);
__e1000_resume[5402]           e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1);
e1000_io_slot_reset[5650]      e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1);
e1000_probe[5797]              e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1);

Are all of them safe for the unlocked version of ASPM disable?

-- 
Jesse Barnes, Intel Open Source Technology Center
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/