Re: [PATCH 1/4] gpio: gpio-mxc: add gpio driver for Freescale MXCarchitecture

[Olof Johansson]

Hi,

On Mon, May 30, 2011 at 10:52:16PM +0800, Shawn Guo wrote:
> Add gpio-mxc driver by copying arch/arm/plat-mxc/gpio.c into
> drivers/gpio with the following changes.
> 
>  * Use readl/writel to replace mach-specific accessors
>    __raw_readl/__raw_writel
> 
>  * Migrate to platform driver by adding .probe function
> 
>  * Add a list to save all mx2 ports references, so that
>    mx2_gpio_irq_handler can walk through all interrupt status
>    registers
> 
> Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
> ---
>  arch/arm/plat-mxc/include/mach/gpio.h |    2 +
>  drivers/gpio/Makefile                 |    1 +
>  drivers/gpio/gpio-mxc.c               |  423 +++++++++++++++++++++++++++++++++
>  3 files changed, 426 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/gpio/gpio-mxc.c
> 
> diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
> index a2747f1..87bd4ef 100644
> --- a/arch/arm/plat-mxc/include/mach/gpio.h
> +++ b/arch/arm/plat-mxc/include/mach/gpio.h
> @@ -37,7 +37,9 @@
>  #define irq_to_gpio(irq)	((irq) - MXC_GPIO_IRQ_START)
>  
>  struct mxc_gpio_port {
> +	struct list_head node;
>  	void __iomem *base;
> +	int id;

What's id for? You assign it based on pdev->id in the probe function but
never use it anywhere else.


-Olof
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/