[PATCH] mfd: Fix bus lock interaction for WM831x IRQ set_type() operation

From: Mark Brown
Date: Wed Jun 01 2011 - 13:56:57 EST


The WM831x IRQ set_type() operation is doing a direct register write when
called but since set_type() is called with the bus lock held this isn't
legal and could cause deadlocks in the IRQ core.

Fix this by posting the updates into an array and syncing in the
bus_sync_unlock() callback.

Signed-off-by: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
drivers/mfd/wm831x-irq.c | 24 ++++++++++++++++++------
include/linux/mfd/wm831x/core.h | 4 ++++
2 files changed, 22 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c
index 42b928e..b23d8d5 100644
--- a/drivers/mfd/wm831x-irq.c
+++ b/drivers/mfd/wm831x-irq.c
@@ -348,6 +348,15 @@ static void wm831x_irq_sync_unlock(struct irq_data *data)
struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
int i;

+ for (i = 0; i < ARRAY_SIZE(wm831x->gpio_update); i++) {
+ if (wm831x->gpio_update[i]) {
+ wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + i,
+ WM831X_GPN_INT_MODE | WM831X_GPN_POL,
+ wm831x->gpio_update[i]);
+ wm831x->gpio_update[i] = 0;
+ }
+ }
+
for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks_cur); i++) {
/* If there's been a change in the mask write it back
* to the hardware. */
@@ -387,7 +396,7 @@ static void wm831x_irq_disable(struct irq_data *data)
static int wm831x_irq_set_type(struct irq_data *data, unsigned int type)
{
struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
- int val, irq;
+ int irq;

irq = data->irq - wm831x->irq_base;

@@ -399,22 +408,25 @@ static int wm831x_irq_set_type(struct irq_data *data, unsigned int type)
return -EINVAL;
}

+ /* We set the high bit to flag that we need an update; don't
+ * do the update here as we can be called with the bus lock
+ * held.
+ */
switch (type) {
case IRQ_TYPE_EDGE_BOTH:
- val = WM831X_GPN_INT_MODE;
+ wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_INT_MODE;
break;
case IRQ_TYPE_EDGE_RISING:
- val = WM831X_GPN_POL;
+ wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_POL;
break;
case IRQ_TYPE_EDGE_FALLING:
- val = 0;
+ wm831x->gpio_update[irq] = 0x10000;
break;
default:
return -EINVAL;
}

- return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + irq,
- WM831X_GPN_INT_MODE | WM831X_GPN_POL, val);
+ return 0;
}

static struct irq_chip wm831x_irq_chip = {
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
index c9a79d2..1d93cbe 100644
--- a/include/linux/mfd/wm831x/core.h
+++ b/include/linux/mfd/wm831x/core.h
@@ -338,6 +338,7 @@
struct regulator_dev;

#define WM831X_NUM_IRQ_REGS 5
+#define WM831X_NUM_GPIO_REGS 16

enum wm831x_parent {
WM8310 = 0x8310,
@@ -373,6 +374,9 @@ struct wm831x {

int num_gpio;

+ /* Used by the interrupt controller code to post writes */
+ int gpio_update[WM831X_NUM_GPIO_REGS];
+
struct mutex auxadc_lock;
struct completion auxadc_done;

--
1.7.5.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/