Re: [RFC PATCH] MTD: atmel_nand: optimize read/write buffer functions

[Uwe Kleine-König]

On Tue, Jun 28, 2011 at 01:50:56PM +0200, Nicolas Ferre wrote:
> For PIO NAND access functions, we use the features of the SMC:
> - no need to take into account the NAND bus width: SMC will deal with this
> - a word aligned memcpy on the NAND chip-select space is able to generate
>   proper SMC behavior while optimizing AHB bus usage thanks to optimized memcpy
>   implementation.
> 
> Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
> ---
>  drivers/mtd/nand/atmel_nand.c |   71 +++++++++++++++++-----------------------
>  1 files changed, 30 insertions(+), 41 deletions(-)
> 
> diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
> index b300705..cb8a04b 100644
> --- a/drivers/mtd/nand/atmel_nand.c
> +++ b/drivers/mtd/nand/atmel_nand.c
> @@ -160,37 +160,6 @@ static int atmel_nand_device_ready(struct mtd_info *mtd)
>                  !!host->board->rdy_pin_active_low;
>  }
>  
> -/*
> - * Minimal-overhead PIO for data access.
> - */
> -static void atmel_read_buf8(struct mtd_info *mtd, u8 *buf, int len)
> -{
> -	struct nand_chip	*nand_chip = mtd->priv;
> -
> -	__raw_readsb(nand_chip->IO_ADDR_R, buf, len);
> -}
> -
> -static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
> -{
> -	struct nand_chip	*nand_chip = mtd->priv;
> -
> -	__raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
> -}
> -
> -static void atmel_write_buf8(struct mtd_info *mtd, const u8 *buf, int len)
> -{
> -	struct nand_chip	*nand_chip = mtd->priv;
> -
> -	__raw_writesb(nand_chip->IO_ADDR_W, buf, len);
> -}
> -
> -static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
> -{
> -	struct nand_chip	*nand_chip = mtd->priv;
> -
> -	__raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
> -}
> -
>  static void dma_complete_func(void *completion)
>  {
>  	complete(completion);
> @@ -265,33 +234,53 @@ err_buf:
>  static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
>  {
>  	struct nand_chip *chip = mtd->priv;
> -	struct atmel_nand_host *host = chip->priv;
> +	u32 align;
> +	u8 *pbuf;
>  
>  	if (use_dma && len > mtd->oobsize)
>  		/* only use DMA for bigger than oob size: better performances */
>  		if (atmel_nand_dma_op(mtd, buf, len, 1) == 0)
>  			return;
>  
> -	if (host->board->bus_width_16)
> -		atmel_read_buf16(mtd, buf, len);
> -	else
> -		atmel_read_buf8(mtd, buf, len);
> +	/* if no DMA operation possible, use PIO */
> +	pbuf = buf;
> +	align = 0x03 & ((unsigned)pbuf);
> +
> +	if (align) {
> +		u32 align_len = 4 - align;
> +
> +		/* non aligned buffer: re-align to next word boundary */
> +		ioread8_rep(chip->IO_ADDR_R, pbuf, align_len);
> +		pbuf += align_len;
> +		len -= align_len;
> +	}
> +	memcpy((void *)pbuf, chip->IO_ADDR_R, len);
I think you don't need to cast to (void *). I think you need to cast the
2nd parameter instead because sparse don't like you passing an void
__iomem *.
Is it correct to read from chip->IO_ADDR_R, don't you need
chip->IO_ADDR_R + align_len? Taking this into account, does it really
help to align pbuf?

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/