Re: [PATCH 1/3]Fix typo interrupt(s) to interrupt(s)
From: Justin P. Mattock
Date: Fri Jul 08 2011 - 15:03:18 EST
jiri,
not sure if you saw these, adding you to the Cc's list
From: "Justin P. Mattock"<justinmattock@xxxxxxxxx>
The patch below fixes some typos interrrupt to interrupt.
Note I sent something similar a few months ago, either this was the same or
newly created typos have been created.
Signed-off-by: Justin P. Mattock<justinmattock@xxxxxxxxx>
---
arch/arm/mach-omap2/smartreflex.c | 2 +-
arch/powerpc/platforms/embedded6xx/storcenter.c | 2 +-
drivers/net/arm/ks8695net.c | 2 +-
drivers/net/atlx/atl1.c | 2 +-
drivers/net/sky2.c | 2 +-
drivers/net/wireless/rtlwifi/pci.c | 2 +-
drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c | 4 ++--
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c | 2 +-
drivers/tty/serial/mrst_max3110.c | 2 +-
drivers/usb/gadget/langwell_udc.c | 2 +-
drivers/usb/musb/musb_gadget.c | 2 +-
11 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index fb7dc52..8b6da75 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -247,7 +247,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr)
* driver register and sr device intializtion API's. Only one call
* will ultimately succeed.
*
- * Currently this function registers interrrupt handler for a particular SR
+ * Currently this function registers interrupt handler for a particular SR
* if smartreflex class driver is already registered and has
* requested for interrupts and the SR interrupt line in present.
*/
diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c
index 613070e..f1eebca 100644
--- a/arch/powerpc/platforms/embedded6xx/storcenter.c
+++ b/arch/powerpc/platforms/embedded6xx/storcenter.c
@@ -77,7 +77,7 @@ static void __init storcenter_setup_arch(void)
}
/*
- * Interrupt setup and service. Interrrupts on the turbostation come
+ * Interrupt setup and service. Interrupts on the turbostation come
* from the four PCI slots plus onboard 8241 devices: I2C, DUART.
*/
static void __init storcenter_init_IRQ(void)
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index a7b0caa..47e7be6 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -412,7 +412,7 @@ ks8695_tx_irq(int irq, void *dev_id)
* Interrupt Status Register (Offset 0xF208)
* Bit29: WAN MAC Receive Status
* Bit16: LAN MAC Receive Status
- * So, this Rx interrrupt enable/status bit number is equal
+ * So, this Rx interrupt enable/status bit number is equal
* as Rx IRQ number.
*/
static inline u32 ks8695_get_rx_enable_bit(struct ks8695_priv *ksp)
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index cd5789f..ab1d8a4 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -858,7 +858,7 @@ static s32 atl1_init_hw(struct atl1_hw *hw)
atl1_init_flash_opcode(hw);
if (!hw->phy_configured) {
- /* enable GPHY LinkChange Interrrupt */
+ /* enable GPHY LinkChange Interrupt */
ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
if (ret_val)
return ret_val;
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 3ee41da..a04c56e 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1973,7 +1973,7 @@ static void sky2_hw_down(struct sky2_port *sky2)
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
- /* Force any delayed status interrrupt and NAPI */
+ /* Force any delayed status interrupt and NAPI */
sky2_write32(hw, STAT_LEV_TIMER_CNT, 0);
sky2_write32(hw, STAT_TX_TIMER_CNT, 0);
sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 9f8ccae..52cd981 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -1573,7 +1573,7 @@ static void rtl_pci_stop(struct ieee80211_hw *hw)
u8 RFInProgressTimeOut = 0;
/*
- *should before disable interrrupt&adapter
+ *should before disable interrupt&adapter
*and will do it immediately.
*/
set_hal_stop(rtlhal);
diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
index 830822f..f7ce399 100644
--- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
+++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
@@ -390,10 +390,10 @@ static void ft1000_reset_asic(struct net_device *dev)
}
mdelay(1);
if (info->AsicID == ELECTRABUZZ_ID) {
- // set watermark to -1 in order to not generate an interrrupt
+ // set watermark to -1 in order to not generate an interrupt
ft1000_write_reg(dev, FT1000_REG_WATERMARK, 0xffff);
} else {
- // set watermark to -1 in order to not generate an interrrupt
+ // set watermark to -1 in order to not generate an interrupt
ft1000_write_reg(dev, FT1000_REG_MAG_WATERMARK, 0xffff);
}
// clear interrupts
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
index b0a4211..d3642a2 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
@@ -601,7 +601,7 @@ static void ft1000_reset_asic(struct net_device *dev)
mdelay(1);
- /* set watermark to -1 in order to not generate an interrrupt */
+ /* set watermark to -1 in order to not generate an interrupt */
ft1000_write_register(ft1000dev, 0xffff, FT1000_REG_MAG_WATERMARK);
/* clear interrupts */
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index 1bd2845..e829ac2 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -23,7 +23,7 @@
* 1 word. If SPI master controller doesn't support sclk frequency change,
* then the char need be sent out one by one with some delay
*
- * 2. Currently only RX available interrrupt is used, no need for waiting TXE
+ * 2. Currently only RX available interrupt is used, no need for waiting TXE
* interrupt for a low speed UART device
*/
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index 9cee88a..8d6ca5e 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -2968,7 +2968,7 @@ static irqreturn_t langwell_irq(int irq, void *_dev)
handle_port_change(dev);
}
- /* suspend interrrupt */
+ /* suspend interrupt */
if (irq_sts& STS_SLI) {
dev_vdbg(&dev->pdev->dev, "suspend interrupt\n");
handle_bus_suspend(dev);
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 0a50a35..e30d56d 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -704,7 +704,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
* most these gadgets, end of is signified either by a short packet,
* or filling the last byte of the buffer. (Sending extra data in
* that last pckate should trigger an overflow fault.) But in mode 1,
- * we don't get DMA completion interrrupt for short packets.
+ * we don't get DMA completion interrupt for short packets.
*
* Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
* to get endpoint interrupt on every DMA req, but that didn't seem
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/