Re: [PATCH 0/4] Stop kswapd consuming 100% CPU when highest zone is small

From: Andrew Lutomirski
Date: Fri Jul 22 2011 - 09:22:15 EST


On Thu, Jul 21, 2011 at 8:30 PM, Minchan Kim <minchan.kim@xxxxxxxxx> wrote:
> On Fri, Jul 22, 2011 at 1:58 AM, Andrew Lutomirski <luto@xxxxxxx> wrote:
>> On Thu, Jul 21, 2011 at 12:42 PM, Minchan Kim <minchan.kim@xxxxxxxxx> wrote:
>>> On Thu, Jul 21, 2011 at 12:36:11PM -0400, Andrew Lutomirski wrote:
>>>> On Thu, Jul 21, 2011 at 12:24 PM, Minchan Kim <minchan.kim@xxxxxxxxx> wrote:
>>>> > On Thu, Jul 21, 2011 at 05:09:59PM +0100, Mel Gorman wrote:
>>>> >> On Fri, Jul 22, 2011 at 12:37:22AM +0900, Minchan Kim wrote:
>>>> >> > On Fri, Jun 24, 2011 at 03:44:53PM +0100, Mel Gorman wrote:
>>>> >> > > (Built this time and passed a basic sniff-test.)
>>>> >> > >
>>>> >> > > During allocator-intensive workloads, kswapd will be woken frequently
>>>> >> > > causing free memory to oscillate between the high and min watermark.
>>>> >> > > This is expected behaviour.  Unfortunately, if the highest zone is
>>>> >> > > small, a problem occurs.
>>>> >> > >
>>>> >> > > This seems to happen most with recent sandybridge laptops but it's
>>>> >> > > probably a co-incidence as some of these laptops just happen to have
>>>> >> > > a small Normal zone. The reproduction case is almost always during
>>>> >> > > copying large files that kswapd pegs at 100% CPU until the file is
>>>> >> > > deleted or cache is dropped.
>>>> >> > >
>>>> >> > > The problem is mostly down to sleeping_prematurely() keeping kswapd
>>>> >> > > awake when the highest zone is small and unreclaimable and compounded
>>>> >> > > by the fact we shrink slabs even when not shrinking zones causing a lot
>>>> >> > > of time to be spent in shrinkers and a lot of memory to be reclaimed.
>>>> >> > >
>>>> >> > > Patch 1 corrects sleeping_prematurely to check the zones matching
>>>> >> > >   the classzone_idx instead of all zones.
>>>> >> > >
>>>> >> > > Patch 2 avoids shrinking slab when we are not shrinking a zone.
>>>> >> > >
>>>> >> > > Patch 3 notes that sleeping_prematurely is checking lower zones against
>>>> >> > >   a high classzone which is not what allocators or balance_pgdat()
>>>> >> > >   is doing leading to an artifical believe that kswapd should be
>>>> >> > >   still awake.
>>>> >> > >
>>>> >> > > Patch 4 notes that when balance_pgdat() gives up on a high zone that the
>>>> >> > >   decision is not communicated to sleeping_prematurely()
>>>> >> > >
>>>> >> > > This problem affects 2.6.38.8 for certain and is expected to affect
>>>> >> > > 2.6.39 and 3.0-rc4 as well. If accepted, they need to go to -stable
>>>> >> > > to be picked up by distros and this series is against 3.0-rc4. I've
>>>> >> > > cc'd people that reported similar problems recently to see if they
>>>> >> > > still suffer from the problem and if this fixes it.
>>>> >> > >
>>>> >> >
>>>> >> > Good!
>>>> >> > This patch solved the problem.
>>>> >> > But there is still a mystery.
>>>> >> >
>>>> >> > In log, we could see excessive shrink_slab calls.
>>>> >>
>>>> >> Yes, because shrink_slab() was called on each loop through
>>>> >> balance_pgdat() even if the zone was balanced.
>>>> >>
>>>> >>
>>>> >> > And as you know, we had merged patch which adds cond_resched where last of the function
>>>> >> > in shrink_slab. So other task should get the CPU and we should not see
>>>> >> > 100% CPU of kswapd, I think.
>>>> >> >
>>>> >>
>>>> >> cond_resched() is not a substitute for going to sleep.
>>>> >
>>>> > Of course, it's not equal with sleep but other task should get CPU and conusme their time slice
>>>> > So we should never see 100% CPU consumption of kswapd.
>>>> > No?
>>>>
>>>> If the rest of the system is idle, then kswapd will happily use 100%
>>>> CPU.  (Or on a multi-core system, kswapd will use close to 100% of one
>>>
>>> Of course. But at least, we have a test program and I think it's not idle.
>>
>> The test program I used was 'top', which is pretty close to idle.
>>
>>>
>>>> CPU even if another task is using the other one.  This is bad enough
>>>> on a desktop, but on a laptop you start to notice when your battery
>>>> dies.)
>>>
>>> Of course it's bad. :)
>>> What I want to know is just what's exact cause of 100% CPU usage.
>>> It might be not 100% but we might use the word sloppily.
>>>
>>
>> Well, if you want to pedantic, my laptop can, in theory, demonstrate
>> true 100% CPU usage.  Trigger the bug, suspend every other thread, and
>> listen to the laptop fan spin and feel the laptop get hot.  (The fan
>> is controlled by the EC and takes no CPU.)
>>
>> In practice, the usage was close enough to 100% that it got rounded.
>>
>> The cond_resched was enough to at least make the system responsive
>> instead of the hard freeze I used to get.
>
> I don't want to be pedantic. :)
> What I have a thought about 100% CPU usage was that it doesn't yield
> CPU and spins on the CPU but as I heard your example(ie, cond_resched
> makes the system responsive), it's not the case. It was just to use
> most of time in kswapd, not 100%. It seems I was paranoid about the
> word, sorry for that.

Ah, sorry. I must have been unclear in my original email.

In 2.6.39, it made my system unresponsive. With your cond_resched and
pgdat_balanced fixes, it just made kswapd eat all available CPU, but
the system still worked.

--Andy
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/