RE: [PATCH] OMAP3: NAND: Adding NAND support and specifying NANDpartitions.

From: Bhandiwad, Hrishikesh
Date: Tue Jul 26 2011 - 07:09:20 EST


My Replies inline.

Thanks & Regards,
Hrishikesh
________________________________________
From: Grazvydas Ignotas [notasas@xxxxxxxxx]
Sent: Tuesday, July 26, 2011 3:08 PM
To: Bhandiwad, Hrishikesh
Cc: linux-omap@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; linux-mtd@xxxxxxxxxxxxxxxxxxx; Hiremath, Vaibhav; Premi, Sanjeev
Subject: Re: [PATCH] OMAP3: NAND: Adding NAND support and specifying NAND partitions.

On Mon, Jul 25, 2011 at 4:40 PM, Hrishikesh Bhandiwad
<hrishikesh.b@xxxxxx> wrote:
> This patch adds the NAND support on OMAP3EVM board and also allocates
> five partitions on NAND.
> Referred to file: arch/arm/mach-omap2/board-omap3beagle.c
>
> Signed-off-by: Vaibhav Hiremath <hvaibhav@xxxxxx>
> Signed-off-by: Sanjeev Premi <premi@xxxxxx>
> Signed-off-by: Hrishikesh Bhandiwad <hrishikesh.b@xxxxxx>
> ---
> arch/arm/mach-omap2/board-omap3evm.c | 40 ++++++++++++++++++++++++++++++++++
> 1 files changed, 40 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
> index b4d4346..be45b63 100644
> --- a/arch/arm/mach-omap2/board-omap3evm.c
> +++ b/arch/arm/mach-omap2/board-omap3evm.c
> @@ -30,6 +30,10 @@
> #include <linux/usb/otg.h>
> #include <linux/smsc911x.h>
>
> +#include <linux/mtd/mtd.h>

You don't need this include.

> +#include <linux/mtd/partitions.h>
> +#include <linux/mtd/nand.h>
> +
> #include <linux/wl12xx.h>
> #include <linux/regulator/fixed.h>
> #include <linux/regulator/machine.h>
> @@ -46,6 +50,8 @@
> #include <plat/mcspi.h>
> #include <video/omapdss.h>
> #include <video/omap-panel-generic-dpi.h>
> +#include <plat/gpmc.h>
> +#include <plat/nand.h>

These 2 too.

>
> #include "mux.h"
> #include "sdram-micron-mt46h32m32lf-6.h"
> @@ -101,6 +107,37 @@ static void __init omap3_evm_get_revision(void)
> }
> }
>
> +static struct mtd_partition omap3evm_nand_partitions[] = {
> + /* All the partition sizes are listed in terms of NAND block size */
> + {
> + .name = "X-Loader",
> + .offset = 0,
> + .size = 4 * NAND_BLOCK_SIZE,
> + .mask_flags = MTD_WRITEABLE, /* force read-only */
> + },
> + {
> + .name = "U-Boot",
> + .offset = 0x80000

Missing comma. Have you at least tried compiling this?
[Hrishikesh] Apologies. I maintain different git repositories .Had compiled and tested in other one , missed out the commas while making changes in this one.
Will send out a patch with perfect changes in my next revision.

> + .size = 15 * NAND_BLOCK_SIZE,
> + .mask_flags = MTD_WRITEABLE, /* force read-only */
> + },
> + {
> + .name = "U-Boot Env",
> + .offset = 0x260000
> + .size = 1 * NAND_BLOCK_SIZE,
> + },
> + {
> + .name = "Kernel",
> + .offset = 0x280000
> + .size = 32 * NAND_BLOCK_SIZE,
> + },
> + {
> + .name = "File System",
> + .offset = 0x680000
> + .size = MTDPART_SIZ_FULL,
> + },
> +};
> +
> #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
> #include <plat/gpmc-smsc911x.h>
>
> @@ -696,6 +733,9 @@ static void __init omap3_evm_init(void)
>
> omap_serial_init();
>
> + omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions,
> + ARRAY_SIZE(omap3evm_nand_partitions));
> +
> /* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
> usb_nop_xceiv_register();
>
> --
> 1.6.2.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>

--
Gražvydas
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/