[PATCH 2/5] x86, ioapic: Split setup_ioapic_entry for interrupt remappedversion

From: Yinghai Lu
Date: Fri Jul 29 2011 - 18:34:41 EST



Ingo pointed out that setup_ioapic_entry is way too big now.

Try split into intr-remap related to setup_ir_ioapic_entry().

Also passing io_apic_irq_attr struct pointer instead of 5 parameters in those two
functions.

At last in setup_ir_ioapic_entry(), don't need to panic.

Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>

---
arch/x86/kernel/apic/io_apic.c | 147 +++++++++++++++++++++++------------------
1 file changed, 84 insertions(+), 63 deletions(-)

Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -1255,72 +1255,95 @@ static void ioapic_register_intr(unsigne
fasteoi ? "fasteoi" : "edge");
}

-static int setup_ioapic_entry(int apic_id, int irq,
- struct IO_APIC_route_entry *entry,
- unsigned int destination, int trigger,
- int polarity, int vector, int pin)
+
+static int setup_ir_ioapic_entry(int irq,
+ struct IR_IO_APIC_route_entry *entry,
+ unsigned int destination, int vector,
+ struct io_apic_irq_attr *attr)
{
- /*
- * add it to the IO-APIC irq-routing table:
- */
- memset(entry,0,sizeof(*entry));
+ int index;
+ struct irte irte;
+ int apic_id = mpc_ioapic_id(attr->ioapic);
+ struct intel_iommu *iommu = map_ioapic_to_ir(apic_id);
+
+ if (!iommu) {
+ pr_warn("No mapping iommu for ioapic %d\n", apic_id);
+ return -ENODEV;
+ }

- if (intr_remapping_enabled) {
- struct intel_iommu *iommu = map_ioapic_to_ir(apic_id);
- struct irte irte;
- struct IR_IO_APIC_route_entry *ir_entry =
- (struct IR_IO_APIC_route_entry *) entry;
- int index;
-
- if (!iommu)
- panic("No mapping iommu for ioapic %d\n", apic_id);
-
- index = alloc_irte(iommu, irq, 1);
- if (index < 0)
- panic("Failed to allocate IRTE for ioapic %d\n", apic_id);
-
- prepare_irte(&irte, vector, destination);
-
- /* Set source-id of interrupt request */
- set_ioapic_sid(&irte, apic_id);
-
- modify_irte(irq, &irte);
-
- ir_entry->index2 = (index >> 15) & 0x1;
- ir_entry->zero = 0;
- ir_entry->format = 1;
- ir_entry->index = (index & 0x7fff);
- /*
- * IO-APIC RTE will be configured with virtual vector.
- * irq handler will do the explicit EOI to the io-apic.
- */
- ir_entry->vector = pin;
-
- apic_printk(APIC_VERBOSE, KERN_DEBUG "IOAPIC[%d]: "
- "Set IRTE entry (P:%d FPD:%d Dst_Mode:%d "
- "Redir_hint:%d Trig_Mode:%d Dlvry_Mode:%X "
- "Avail:%X Vector:%02X Dest:%08X "
- "SID:%04X SQ:%X SVT:%X)\n",
- apic_id, irte.present, irte.fpd, irte.dst_mode,
- irte.redir_hint, irte.trigger_mode, irte.dlvry_mode,
- irte.avail, irte.vector, irte.dest_id,
- irte.sid, irte.sq, irte.svt);
- } else {
- entry->delivery_mode = apic->irq_delivery_mode;
- entry->dest_mode = apic->irq_dest_mode;
- entry->dest = destination;
- entry->vector = vector;
+ index = alloc_irte(iommu, irq, 1);
+ if (index < 0) {
+ pr_warn("Failed to allocate IRTE for ioapic %d\n", apic_id);
+ return -ENOMEM;
}

- entry->mask = 0; /* enable IRQ */
- entry->trigger = trigger;
- entry->polarity = polarity;
+ prepare_irte(&irte, vector, destination);
+
+ /* Set source-id of interrupt request */
+ set_ioapic_sid(&irte, apic_id);
+
+ modify_irte(irq, &irte);
+
+ apic_printk(APIC_VERBOSE, KERN_DEBUG "IOAPIC[%d]: "
+ "Set IRTE entry (P:%d FPD:%d Dst_Mode:%d "
+ "Redir_hint:%d Trig_Mode:%d Dlvry_Mode:%X "
+ "Avail:%X Vector:%02X Dest:%08X "
+ "SID:%04X SQ:%X SVT:%X)\n",
+ apic_id, irte.present, irte.fpd, irte.dst_mode,
+ irte.redir_hint, irte.trigger_mode, irte.dlvry_mode,
+ irte.avail, irte.vector, irte.dest_id,
+ irte.sid, irte.sq, irte.svt);
+
+ memset(entry, 0, sizeof(*entry));
+
+ entry->index2 = (index >> 15) & 0x1;
+ entry->zero = 0;
+ entry->format = 1;
+ entry->index = (index & 0x7fff);
+ /*
+ * IO-APIC RTE will be configured with virtual vector.
+ * irq handler will do the explicit EOI to the io-apic.
+ */
+ entry->vector = attr->ioapic_pin;
+ entry->mask = 0; /* enable IRQ */
+ entry->trigger = attr->trigger;
+ entry->polarity = attr->polarity;

/* Mask level triggered irqs.
* Use IRQ_DELAYED_DISABLE for edge triggered irqs.
*/
- if (trigger)
+ if (attr->trigger)
+ entry->mask = 1;
+
+ return 0;
+}
+
+static int setup_ioapic_entry(int irq, struct IO_APIC_route_entry *entry,
+ unsigned int destination, int vector,
+ struct io_apic_irq_attr *attr)
+{
+ if (intr_remapping_enabled)
+ return setup_ir_ioapic_entry(irq,
+ (struct IR_IO_APIC_route_entry *)entry,
+ destination, vector, attr);
+
+ memset(entry, 0, sizeof(*entry));
+
+ entry->delivery_mode = apic->irq_delivery_mode;
+ entry->dest_mode = apic->irq_dest_mode;
+ entry->dest = destination;
+ entry->vector = vector;
+ entry->mask = 0; /* enable IRQ */
+ entry->trigger = attr->trigger;
+ entry->polarity = attr->polarity;
+
+ /*
+ * Mask level triggered irqs.
+ * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
+ */
+ if (attr->trigger)
entry->mask = 1;
+
return 0;
}

@@ -1351,13 +1374,11 @@ static void setup_ioapic_irq(unsigned in
attr->ioapic, mpc_ioapic_id(attr->ioapic), attr->ioapic_pin,
cfg->vector, irq, attr->trigger, attr->polarity, dest);

-
- if (setup_ioapic_entry(mpc_ioapic_id(attr->ioapic), irq, &entry,
- dest, attr->trigger, attr->polarity, cfg->vector,
- attr->ioapic_pin)) {
- printk("Failed to setup ioapic entry for ioapic %d, pin %d\n",
- mpc_ioapic_id(attr->ioapic), attr->ioapic_pin);
+ if (setup_ioapic_entry(irq, &entry, dest, cfg->vector, attr)) {
+ pr_warn("Failed to setup ioapic entry for ioapic %d, pin %d\n",
+ mpc_ioapic_id(attr->ioapic), attr->ioapic_pin);
__clear_irq_vector(irq, cfg);
+
return;
}

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/