[PATCH] omap2+:panda: Make hdmi_mux_init more robust.

[Marek Belisko]

Add error checking to omap4_panda_hdmi_mux_init function to
avoid problems when mux fails.

Signed-off-by: Marek Belisko <marek.belisko@xxxxxxxxxxxxxxx>
---
 arch/arm/mach-omap2/board-omap4panda.c |   38 +++++++++++++++++++++++--------
 1 files changed, 28 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 9aaa960..59fba7c 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -485,18 +485,33 @@ int __init omap4_panda_dvi_init(void)
 }
 
 
-static void omap4_panda_hdmi_mux_init(void)
+static int omap4_panda_hdmi_mux_init(void)
 {
+	int ret;
 	/* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
-	omap_mux_init_signal("hdmi_hpd",
-			OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("hdmi_cec",
-			OMAP_PIN_INPUT_PULLUP);
+	ret = omap_mux_init_signal("hdmi_hpd",
+				OMAP_PIN_INPUT_PULLUP);
+	if (ret)
+		goto err;
+
+	ret = omap_mux_init_signal("hdmi_cec",
+				OMAP_PIN_INPUT_PULLUP);
+	if (ret)
+		goto err;
+
 	/* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
-	omap_mux_init_signal("hdmi_ddc_scl",
-			OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("hdmi_ddc_sda",
-			OMAP_PIN_INPUT_PULLUP);
+	ret = omap_mux_init_signal("hdmi_ddc_scl",
+				OMAP_PIN_INPUT_PULLUP);
+	if (ret)
+		goto err;
+
+	ret = omap_mux_init_signal("hdmi_ddc_sda",
+				OMAP_PIN_INPUT_PULLUP);
+	if (ret)
+		goto err;
+	return 0;
+err:
+	return ret;
 }
 
 static struct gpio panda_hdmi_gpios[] = {
@@ -550,7 +565,10 @@ void omap4_panda_display_init(void)
 	if (r)
 		pr_err("error initializing panda DVI\n");
 
-	omap4_panda_hdmi_mux_init();
+	r = omap4_panda_hdmi_mux_init();
+	if (r)
+		pr_err("error initializing panda HDMI\n");
+
 	omap_display_init(&omap4_panda_dss_data);
 }
 
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/